Changing the password on your home Wi-Fi router is one of the first things you should do after purchasing the device, especially if it's a mobile modem from MTS. The default factory combinations, found on a sticker under the router's casing, are often publicly available and easily cracked by hackers or neighbors with the appropriate software. Securing your network depends directly on the complexity of this code, since through an open access point, ill-intentioned individuals can not only steal traffic, but also intercept personal data transmitted over the network.
The procedure for changing the access key on MTS devices, whether landline MTS 4G Router or portable MTS Connect, have their own characteristics that distinguish them from conventional wired routers. Unlike traditional models, not only the local network plays a key role here, but also interaction with the operator's SIM card, which imposes certain requirements on the interface settings. Below, we'll detail the steps for various equipment models so you can reliably protect your internet connection.
Please note that the control interface may differ depending on the year of manufacture of the device and the version of the installed firmware. The MTS router management interface is by default accessible at 192.168.11.1, but in some older models the address may be 192.168.0.1 or 192.168.8.1. Before you begin, make sure your device (laptop or smartphone) is connected to the router via cable or Wi-Fi, otherwise you won't be able to access the settings.
Preparing to change security settings
Before changing network settings, ensure a stable connection between your control device and the MTS router. It's best to use a wired connection via a LAN cable, as changing the password and rebooting the router will disconnect the Wi-Fi connection, and you may lose access to the admin panel mid-setup. If this isn't possible, make sure your laptop or phone has sufficient battery power to handle all the configuration steps without the risk of unexpected disconnection.
You will also need to know your current web interface login details. On most modern MTS models, the default login and password are admin, however, on some devices the password may be unique and printed on a label under the case along with the network name (SSID). Look for a sticker that says Wi-Fi Key or Password and prepare it so you don't waste time searching.
Be sure to check that the SIM card is active and that there is network coverage if you plan to change settings that affect modem operation. Changing the Wi-Fi password typically doesn't affect cellular network settings. However, if the router is in bridge mode or has specific APN settings, tampering with system files without proper knowledge could result in loss of internet access.
⚠️ Note: If you change settings via a Wi-Fi connection, please note that the network will be disconnected after applying the new settings. You will need to re-find the network in the list of available networks and enter the new password to continue.
☑️ Check before setup
Login to the router's web management interface
To begin the setup process, open any modern browser on your computer or smartphone. In the address bar, where the website name is usually located, enter the router's IP address. For most MTS devices, this is the standard. 192.168.11.1, but if the page doesn't load, try an alternative 192.168.0.1 or domain name home.mts.ru, which often redirects to the desired authorization page.
After navigating to the address, the system will ask you to enter your credentials. This isn't your Wi-Fi password, but the administrator password for accessing the settings. Enter your login admin and the corresponding password. If you haven't changed this information before, it's listed on the factory sticker. In newer firmware versions, the system may prompt you to create a new administrator password upon first login for increased security. Do so and write the new information down in a safe place.
The interface may look different: older models use a classic menu on the left or top, while newer MTS routers running Android-like operating systems or updated Linux shells feature a tiled design with large icons. Find the section responsible for network settings, often labeled "Wi-Fi," "Wireless Network," or "WLAN Settings."
What should I do if the page doesn't open?
If your browser says "Unable to access the site," check that you're entering the numbers correctly. Make sure the address doesn't contain any extra characters, spaces, or letters (e.g., http://). Also, try opening the page in incognito mode or using a different browser. If all else fails, your computer's IP address settings may be incorrect and should be set to "Obtain automatically" (DHCP).
Find the wireless settings section
After successful authorization, you'll see the main control panel, which displays the connection status, 4G/LTE signal strength, and the number of connected devices. Navigating the menu can be confusing for a beginner, so it's important to know where to find the settings you need. Look for tabs labeled "Settings," "Network," "Wi-Fi," or "Wireless." On some models, such as MTS 4G Router 797 or Huawei B525 (branded MTS), the path may look like this Settings → Wi-Fi → Basic settings.
In the Wireless Network section, you'll see your current network name (SSID) and a password entry field. This is where key changes occur. Note the "Security Mode" or "Encryption" drop-down list. For maximum security, we recommend selecting either standard. WPA2-PSK or WPA3, if your device supports this modern protocol. Older encryption methods, such as WEP, are long outdated and easily cracked.
Some users confuse guest network settings with their main network. A guest network is designed for temporary access by visitors and often has a separate password. Make sure you're editing the settings for the main network to avoid a situation where the "main" password is changed and guests are accessing the network through an open access point. In the interface, these networks can be separated by tabs called "Main Network" and "Guest Network."
| Parameter | Recommended value | Description |
|---|---|---|
| Security mode | WPA2-PSK / WPA3 | The most secure data encryption standard |
| WPA version | WPA2-PSK + WPA3-SAE | Combined mode for compatibility |
| Encryption | AES | Information encoding algorithm |
| Channel | Auto | It's better to leave the choice to the router |
| Channel width | 20/40/80 MHz | Affects speed and range |
Create a strong password and save your settings
In the "Password" or "PSK" field, enter a new character combination. It's important to strike a balance between complexity and memorability, although for a Wi-Fi password, memorability is secondary since devices connect automatically. Avoid using obvious sequences like "12345678," "qwerty," or a phone number. Cryptographic resistance A password is the main barrier for neighbors who want to use your internet for free.
After entering the new password, be sure to click "Apply," "Save," or "OK." On some MTS router models, changes take effect immediately, while on others, a device reboot may be required. The interface may freeze for a few seconds or display a message stating that the settings have been applied but the connection has been lost. This is normal system behavior.
If you changed settings via Wi-Fi, your phone or laptop will immediately lose connection to the router because the old password will no longer work. You'll need to go to your device's Wi-Fi settings, find your network (it may appear as "Saved" or "Unable to connect"), select "Forget network" or "Delete," and then reconnect using the new password.
⚠️ Important: Do not use Cyrillic characters (Russian letters) in your password. Although modern routers support them, many older devices (smart kettles, lamps, and older smartphones) may not display or accept such passwords correctly, leading to connection issues.
Setting up different MTS router models
MTS's hardware lineup is diverse, and the interface can vary significantly. For example, routers of the series MTS 4G Router 797 (often rebranded Huawei phones) have a very streamlined interface, with the Wi-Fi tab located directly on the home screen or in the quick menu. Changing the password here takes just a few clicks: select a network, enter the key, and save.
More complex devices such as MTS 4G Router Pro or devices based on ZTE, may have an expanded menu with multiple tabs. In such cases, look for the "Local Area Network" (LAN) or "WLAN" section. Sometimes the settings are divided into subsections: "Basic Settings," "Security," and "MAC Filtering." You're specifically looking for the "Security" tab within the WLAN menu.
USB modems that distribute Wi-Fi deserve special attention (for example, MTS 827FT). They often have their own web interface that opens automatically when you connect, or can be accessed at 192.168.1.1The logic of actions there is similar: log in as admin/admin, find the "Wi-Fi" or "Network Settings" tab, change the key, and save.
What to do if you forgot your router settings password
It's very common for a user to forget their password for the web interface (admin panel). If you haven't changed the factory password, the problem can be solved by reading the sticker on the bottom of the device. However, if the password was previously changed and lost, it's impossible to recover it software-based for security reasons. The only solution is to perform a full reset.
To do this, find a small hole on the router body, labeled as Reset or WPS/ResetYou'll need a thin object, such as a paperclip or toothpick. With the router powered on, press the button inside the hole and hold it for 10-15 seconds. The lights on the front panel should flash or turn off, indicating the reset process has begun.
After rebooting, the router will return to factory settings: the network name and Wi-Fi password will be as indicated on the sticker, and the password for entering the settings will be restored adminYou will need to go through the initial setup process again, including entering your SIM card details, if they weren't automatically retrieved from your MTS profile.
Frequently Asked Questions (FAQ)
Is it possible to change the password on an MTS router via phone?
Yes, this is possible. To do this, connect to the router's Wi-Fi network, open a browser on your smartphone, and enter the admin panel address (usually 192.168.11.1). The interface is adapted for mobile screens, making it easy to use. Some models also support management via the MTS Wi-Fi or MTS Home apps, where changing the password is as easy as a couple of taps.
Does changing your Wi-Fi password affect your internet speed?
Changing your password doesn't affect speed in any way. However, if you simultaneously change the encryption type (for example, from WEP to WPA2) or the broadcast channel, this can positively impact connection stability and speed, as you'll eliminate interference and unauthorized connections that can hog your bandwidth.
My MTS router isn't saving my new password. What's wrong?
This could be due to several reasons: the device's memory is full, there's a firmware error, or you're trying to enter a password that doesn't meet the requirements (it's too short or contains prohibited characters). Try shortening the password to 8-32 characters, using only Latin characters and numbers, and tap "Save" again. If that doesn't help, perform a factory reset.
Do I need to change my SIM card password when I change my Wi-Fi password?
No, they're different. The PIN protects the SIM card itself from being used in other devices, while the Wi-Fi password protects the router's wireless network. Changing the PIN is only necessary if you want to protect the SIM card if the router is stolen, but a strong Wi-Fi password is sufficient for protecting your home network.