How to change the Wi-Fi network name on an MGTS router: 3 proven methods

Changing the Wi-Fi network name (SSID) on a router from MGTS — a simple procedure that takes no more than 5 minutes, but requires attention to detail. Incorrect steps can lead to a disconnected connection or reset, so it's important to follow the exact instructions for your hardware model. In this article, we'll cover all the current methods: web interface, mobile application MGTS and even with the help of SMS-commands - the latter works for some models GPON ONT.

Changing your network name is useful not only for personalization but also for security. Standard names like MGTS_GPON_XXXX or HUAWEI-1234 They reveal the router model, making it easier for attackers. Furthermore, a unique name helps you quickly find your network in the list of available connections, especially in apartment buildings where dozens of networks with identical names are available.

Before you begin, make sure you have:

  • 🔌 Access the router via cable or your current Wi-Fi network (if you're changing the name remotely, connect in advance to avoid losing the connection).
  • 📱 Login and password for the web interface (usually indicated on the router sticker or in the contract) MGTS).
  • 🔄 Backup your current settings (optional, but recommended for models ZTE F660 or Huawei HG8245H, where the reset occurs more often).
📊 Which router setup method do you prefer?
Via the web interface
Via a mobile app
By SMS commands
Call MGTS support

1. How to find out the MGTS router model and firmware version

Before changing the network name, you need to identify your router model. This will determine the settings interface, available options, and even the path to the section. Wi-Fi. U MGTS The most common devices are:

  • 📡 GPON ONT (wireless terminals from Huawei, ZTE, FiberHome) - are issued when connecting fiber optics.
  • 🖧 Eltex NTU-RG-1402G-W or SERCOMM HV300 — for ADSL or Ethernet connections.
  • 🌐 Keenetic (models Giga, Extra) - less common, but also found among subscribers.

You can find out the model in several ways:

  1. Look at sticker on the back of the router (usually the model, serial number and login information are indicated there).
  2. Log in web interface — login address (for example, 192.168.1.1 or 192.168.0.1) is also indicated on the sticker. The model is displayed on the main page or in the section System → Information.
  3. Use mobile application MGTS — the model will be indicated in the "My devices" section.

It's worth checking your firmware version if you haven't updated your router in a while. Outdated software may not support some features or contain vulnerabilities. The update is available in the section Maintenance → Software Update (the name may differ).

Why is it important to know the router model?

Some models (eg Huawei EchoLife HG8245H) have two independent Wi-Fi modules (2.4 GHz and 5 GHz), and the name needs to be changed for each one separately. In others (like ZTE F660) resetting the settings after changing the SSID occurs automatically unless you save the configuration manually.

2. Method 1: Changing the Wi-Fi name via the web interface

This is the most reliable and universal method that works on all models of MGTS routers, including GPON ONT, Eltex And KeeneticThe instructions are suitable even for devices with non-standard firmware.

Steps for most routers:

  1. Connect to the router via cable or Wi-Fi.
  2. Open your browser and type in the address bar 192.168.1.1 or 192.168.0.1 (see the sticker for the exact address).
  3. Enter your login and password (by default it is often admin/admin or user/user, but at MGTS There may be unique data - check the contract).
  4. Go to the section Wi-Fi, Wireless network or WLAN (the name depends on the model).
  5. Find the field SSID (or Network name) and enter a new name. For dual-band routers (2.4 GHz + 5 GHz), you'll need to change both values ​​separately.
  6. Save the settings with the button Apply, Save or Submit.
  7. Reconnect your devices to the new network.

Features for popular models:

Router model Path to Wi-Fi settings Notes
Huawei HG8245H WLAN → Basic Configuration Two SSIDs for 2.4 GHz and 5 GHz. A reboot is required after changing.
ZTE F660 Network → WLAN → SSID Settings It may reset the settings if you don't press it. Save Config after the changes.
Eltex NTU-RG-1402G-W Wi-Fi → Basic Settings Supports Cyrillic characters in network names.
GPON ONT (FiberHome) Wireless → Basic The interface is in English, but intuitive.

Connect to the router via cable (recommended) | Check the current login/password for the admin panel | Open the browser in incognito mode (to avoid the cache) | Prepare a new network name (without special characters) -->

⚠️ Attention: If after saving the settings the router stops distributing Wi-Fi, check whether the function has been disabled Enable Wireless (or Turn on Wi-Fi). Sometimes it resets when the SSID changes.

3. Method 2: Changing the name via the MGTS mobile app

For subscribers MGTS The official app is available My MGTS (available in App Store And Google Play), which allows you to manage your router remotely. This method is convenient if you don't want to access the web interface or have lost your login information.

Step-by-step instructions:

  1. Download and install the "My MGTS" app.
  2. Log in using your contract or personal account number.
  3. Go to the section Services → Internet → Wi-Fi Settings.
  4. Select your network (if there are several, for example, for 2.4 GHz and 5 GHz).
  5. Click Change network name and enter a new one SSID.
  6. Save the changes. The router will reboot automatically.

The advantages of this method:

  • 🔐 No need to remember your router admin password — log in through your personal account MGTS.
  • 📱 User-friendly interface with prompts (for example, the app will warn you if the network name is too long).
  • 🔄 Automatic router reboot after changes.

Restrictions:

  • ❌ Not all router models are supported (for example, older ones D-Link or TP-Link(issued before 2020 may not be displayed in the app).
  • ❌ This feature is only available to subscribers with an active contract.

4. Method 3: Changing SSID via SMS (for GPON ONT)

A little-known but working method for some models GPON ONT (For example, Huawei EchoLife or ZTE F660) - sending SMS- commands to a special number. This is useful if you don't have access to the web interface or app.

Instructions:

  1. From the phone linked to the contract MGTS, send an SMS to the number 0890 with text: 
    wifi name NEW_NETWORK_NAME

    For example: wifi name MyHomeWiFi_5G.

  2. Wait for a confirmation response (will arrive within 1–2 minutes).
  3. Reconnect your devices to the new network.

Important nuances:

  • 📶 Only works for routers with a SIM card MGTS (usually it is GPON ONT for tariffs with mobile Internet).
  • 🔤 The network name must not contain spaces or special characters (only Latin characters, numbers, and underscores are allowed).
  • 🔄 After the command, the router will reboot, and all connected devices will be disconnected.
⚠️ Attention: If the router stops responding after the SMS command, wait 5 minutes and try connecting again. In rare cases, a physical reboot may be required (press the button). Reset for 10 seconds).

5. Common mistakes and how to avoid them

Users often encounter common issues when changing the name of a Wi-Fi network. Let's look at the most common ones and how to solve them.

Error 1: The router does not save the new network name.

  • 🔹 Check if you clicked Save or Apply after entering a new SSID.
  • 🔹 For some models (for example, ZTE F660) there is a separate button Save Config - it also needs to be pressed.
  • 🔹 Update your router firmware if the problem persists.

Error 2: After changing the SSID, the Internet disappeared.

  • 🔹 Make sure the function Enable Wireless included.
  • 🔹 Check if your ISP connection settings have been reset (section WAN or Internet).
  • 🔹 Reboot the router using the button Reboot or physically turn the power off/on.

Error 3: I can't connect to the router after changing the SSID.

  • 🔹 Connect via cable and check the settings.
  • 🔹 The router's IP address may be lost - try entering it in your browser 192.168.100.1 or 192.168.8.1.
  • 🔹 Reset your router to factory settings (button Reset for 10 seconds) and set up again.

Error 4: New network name is not displayed on devices.

  • 🔹 Make sure your device is scanning for networks in the correct band (2.4 GHz or 5 GHz).
  • 🔹 Restart the device itself (phone, laptop).
  • 🔹 Check if the network is hidden (option Hide SSID should be disabled).
Why might the router not save the settings?

On some models (eg, Huawei MA5671A) When changing the SSID, there is a conflict with the IPTV settings. In this case, you must first disable IPTV in the section TR-069, then change the network name, and then turn on IPTV again.

6. Recommendations for choosing a new Wi-Fi name

New network name (SSID) should be not only memorable but also safe. Here are some tips:

What can be used:

  • 🏠 Personal data without compromising security: IvanovFamily_5G, Flat42_WiFi.
  • 🎮 Thematic titles: Skynet_Hub, GameOfThrones_LAN.
  • 🔢 Numbers and underscores: Home_Net_2026.

What to avoid:

  • 🚫 Personal information: dates of birth, phone numbers, addresses.
  • 🚫 Standard names: MGTS_1234, TP-Link_5G (they are easy to hack).
  • 🚫 Offensive or provocative names (may lead to complaints from neighbors).
  • 🚫 Special characters: #, !, @ - they can cause connection errors.

Also note:

  • 📶 For 2.4 GHz And 5 GHz It is better to use different names (for example, MyHome_2G And MyHome_5G), to make it easier to select the desired network.
  • 🔒 If you use guest network, give it a separate name (eg. MyHome_Guest).
  • 🌐 For Cyrillic names, check if your router supports them (some models, for example, Sercomm HV300, work only with Latin).

7. Additional Wi-Fi settings after changing the SSID

Changing the network name is a good reason to check other parameters as well. Wi-Fi, which affect speed and safety.

1. Change your Wi-Fi password

If you change SSID, it is recommended to update your password as well. Use:

  • 🔐 Minimum 12 characters.
  • 🔢 A combination of letters (upper and lower case), numbers, and symbols.
  • 🚫 Don't use obvious combinations like 12345678 or password.

2. Selecting a channel and bandwidth

In sections Wi-Fi → Channel Settings or Wireless → Channel You can optimize network performance:

  • 📡 For 2.4 GHz choose the least loaded channel (use apps like Wi-Fi Analyzer for analysis).
  • 📶 For 5 GHz set the channel width 80 MHz (if your devices support it).

3. Enabling WPA3

If your router supports WPA3 (For example, Keenetic Giga or Huawei AX3), enable this protocol in the security settings. It's more secure. WPA2.

4. Setting up a guest network

Create a separate network for guests with limited access to local devices:

  • 👥 Limit the speed or operating time of the guest network.
  • 🔒 Set a separate password.

FAQ: Answers to Frequently Asked Questions

Is it possible to change the Wi-Fi name without going into the router settings?

Yes, if you have a router GPON ONT with a SIM card MGTS, you can send an SMS command to the number 0890 (details in section about SMS). Some models also support changing the SSID via the "My MGTS" mobile app without entering the admin password.

Why did my router stop distributing Wi-Fi after changing the SSID?

Possible reasons:

  1. Feature disabled Enable Wireless (check in settings).
  2. The channel or operating mode settings have been lost (for example, selected 802.11n only, and the devices do not support this standard).
  3. A reset of the settings has occurred (relevant for ZTE F660). In this case, you need to reconfigure the Internet connection in the section WAN.

Solution: Connect via cable and check the settings or reset using the button Reset.

How do I reset my Wi-Fi network to its default name if I forgot the new SSID?

If you have lost network access after changing your name, you have two options:

  1. Connect to the router via cable, go to the web interface and return the old name.
  2. Reset the router to factory settings using the button Reset (Hold for 10-15 seconds). After this, the network name and password will return to the default ones (indicated on the sticker).

⚠️ Please note: Resetting will delete all personal settings, including your Wi-Fi password and IPTV configuration.

Is it possible to use Cyrillic in the Wi-Fi network name?

Depends on the router model:

  • ✅ Eltex, Keenetic, some GPON ONT — they support.
  • ❌ Huawei EchoLife, ZTE F660 — only Latin and numbers.

If the network is not displayed after entering the Cyrillic name, try using transliteration (for example, DomashniyWiFi instead of HomeWiFi).

Do I need to reboot my router after changing the SSID?

In most cases, the reboot occurs automatically after saving the settings. However, for some models (for example, FiberHome AN5506-04-F) it is recommended to do this manually:

  1. Find the button in the web interface Reboot (usually in the section System or Maintenance).
  2. Or physically power cycle the router.

This ensures that the new settings are applied correctly.

📖 Read also

How to update a Huawei router: a complete firmware guide Detailed instructions: how to update a Huawei router manually or automatically. Safe software installation. How to disable Wi-Fi on a router via phone: full instructions A detailed guide on how to turn off your router's internet and Wi-Fi from your phone. Methods for all models. How to enable Wi-Fi on an Eta modem: step-by-step instructions A detailed guide on activating a wireless network on the Eta modem. Setting up the SSID, password, and frequency How to See Who's Using My TP-Link WiFi: A Complete Guide Find out who's connected to your TP-Link router. Detailed instructions for checking blocked devices. How to set up Wi-Fi 6 on a TP-Link router: step-by-step instructions Learn how to activate the Wi-Fi 6 (AX) standard on TP-Link routers. Configure frequencies, channels, and more. How to change the password on a TP-Link Wi-Fi router using a computer: Instructions Step-by-step instructions: how to change the password on a TP-Link Wi-Fi router from a PC. Security settings, login