Changing the default wireless network name isn't just a matter of aesthetics, but also an important step in securing your home internet connection. Factory names often contain technical information that could be a clue to hackers. administrator password router. Moreover, in apartment buildings, there are often dozens of networks with similar names, making it difficult to find your own connection on guests' mobile devices or smart appliances.
In this article, we will take a detailed look at the process of renaming an access point on equipment provided by the provider. RostelecomRegardless of your device model—Sagemcom, Eltex, or Huawei—the process is similar, although the interface may differ. You'll learn how to access the control panel, where to find the required fields, and what limitations apply when selecting a new ID.
Before making any changes, it's important to understand that changing the name will cause all your devices to lose connection to the router. You'll have to reconnect your smartphones, laptops, and TVs to the network with the new name. Please remember or write down the new network name before saving the settings., so as not to get confused in the list of available connections.
Preparing to change router settings
First, you need to physically connect to the router. This can be done in two ways: via Ethernet cable or Wi-Fi. The former is preferable, as it ensures a stable connection even when the wireless module reboots. If you're using a laptop or desktop computer, simply plug the network cable into the yellow LAN port on the back of the device.
When connecting via Wi-Fi, make sure your device (smartphone or tablet) is within range of a strong signal. If you decide to change settings via your phone, keep the power cable handy, as the router may briefly lose connection during the process. You will also need your login information for your router's personal account.
⚠️ Note: If you change settings via Wi-Fi, be prepared for the connection to be disconnected immediately after clicking "Save." This is normal system behavior.
The default login details are usually found on a sticker located on the bottom or back of the router. Look for the lines "IP address" (usually 192.168.0.1 or 192.168.1.1), "Login," and "Password." On modern models, Rostelecom A single password is often used, which is also printed there. If you've previously changed this information and forgotten it, you'll need to reset your device to factory settings.
☑️ Ready to customize
Login to the device's web interface
Once connected, open any browser: Chrome, Safari, Yandex Browser, or Edge. In the address bar, where you usually type website addresses, enter the router's IP address. For equipment Rostelecom this is most often 192.168.0.1 or 192.168.1.1Sometimes a domain name is used, for example, rt or login, but the digital address works more reliably.
A login window will appear on the screen. Enter your username and password. In most cases, the default login is admin, and the password is indicated on the sticker or is also equal adminIf you see an interface with the provider's logo and are prompted to enter a phone number or account, you have the new firmware with single sign-on.
In some cases, the browser may display a warning that the connection is not secure. This is common on local networks, as the router doesn't have a security certificate for the internal address. Feel free to click "Advanced" and proceed to the page (it's risky, but safe in this context).
What should I do if the page doesn't load?
Make sure you're connected to your router's network, not your mobile data plan. Try opening the website in incognito mode. If that doesn't help, check your network adapter's IP address settings—they should be set to obtain the address automatically (DHCP).
After successfully entering your data, you'll be taken to the main page of the control panel. Here you can see your connection status, internet speed, and a list of connected devices. We're interested in the section responsible for your wireless network.
Setting up Wi-Fi on Sagemcom routers
Equipment brand Sagemcom (models F@st 1744, 2864, 3890) is one of the most common among the provider's subscribers. The interface here can be either the classic blue or the updated white. To begin renaming the network, go to the top menu and select the tab Network (Network), and then WLAN (Wireless network).
In the menu that opens, find the item SSID Setup or simply SSID. Precisely in the field SSID Name (or SSID) is the current name of your network. Delete the old value and enter a new one using Latin characters. Using Cyrillic characters is not recommended, as some older devices may display Russian letters incorrectly.
Below you will see the security settings. Make sure that the field is Security Mode value selected WPA2-PSK or WPA3This will ensure secure data encryption. In the field Pre-shared Key You can also change the Wi-Fi password, which would be a logical step after renaming the network.
| Parameter | Default value | Recommended value |
|---|---|---|
| SSID Name | RT-WIFI_XXXX | Any unique name |
| Channel Width | Auto | 20/40 MHz |
| Security | WPA2-PSK | WPA2/WPA3 Mixed |
After making all the changes, be sure to click the button Apply/Save (Apply/Save). The router will restart the wireless module, and the old network name will disappear from the list of available connections on your devices.
Changing the network name on Eltex and Huawei devices
Routers Eltex (NTP-RG-1401, 1402 series) often have a more formal and technical interface. To change the name, go to the menu WLAN -> Basic -> SSID SettingsThere may be multiple lines here for different bands (2.4 GHz and 5 GHz). You need to change the field SSID Name for each active range if you want the names to match or be distinct.
Devices Huawei (HG8245H, HG8245Q) feature a minimalist menu design. After logging in (often requiring the password from the sticker), find the tab WLAN. In the section WLAN Basic Configuration the field is located WLAN SSID. Change it to what you want.
It's important to note that new Huawei models may have the "Wi-Fi Multi-SSID" feature enabled. If you simply need to rename the primary network, make sure you're editing it. Primary SSIDThe rest can be used for guest access.
⚠️ Note: Firmware interfaces may be updated by your ISP. If you don't see these options, look for sections labeled "Wireless," "Wireless Network," or "Wi-Fi."
Don't forget to save your settings. On some Eltex models, the save button is located at the bottom of the page and may be labeled Save/ApplyAfter this, the router's Wi-Fi indicators may blink, indicating that the new settings have been applied.
Setting up via the Rostelecom mobile app
The most modern and convenient way to manage your home network is to use the official app. Rostelecom (or "My Rostelecom"). This method is ideal if you don't have a computer at hand. The app automatically detects the router on your local network and allows you to manage it without entering complex IP addresses.
Launch the app on your smartphone connected to the router's Wi-Fi. On the main screen, select your device. In the router's control menu, find the section Wi-Fi settings or My networkThere will be a "Network Name" (SSID) field. Enter a new name and click "Save."
The advantage of this method is that the app will automatically alert you to a lost connection and prompt you to reconnect to the network with a new name. This eliminates human error and confusion.
However, the app's functionality may be limited compared to the full web version. For example, the app doesn't always allow you to configure a separate guest network or change the broadcast channel. However, for the basic task of changing the name, it's quite sufficient.
Dual-band networks: 2.4 GHz and 5 GHz
Most modern routers Rostelecom They operate in two frequency bands: 2.4 GHz and 5 GHz. The former provides greater coverage, while the latter offers higher speeds. During setup, you may see the option to specify two different names or combine them into one.
If you set the same names for both bands, devices will automatically choose which frequency to connect to. This is convenient, but sometimes smartphones get stuck on the slower 2.4 GHz band, even when close to the router. Separate names (for example, MyHome And MyHome_5G) give you control over the connection.
In the web interface, this usually appears as two separate tabs or checkboxes. Enable 2.4G Wireless And Enable 5G WirelessMake sure to change the name in both sections if you want the network to be accessible everywhere. Ignoring one of the ranges will result in some devices simply not seeing the network after a reboot.
Smart home devices (lamps, plugs) most often require the 2.4 GHz band. If you hide or rename only the 5 GHz network, your smart devices will continue to work, but new devices may not find the network for initial setup if the app specifically requires 2.4 GHz.
Common problems and their solutions
Sometimes, after changing the network name, the network disappears completely or the device can't connect to it. The first cause is the DNS cache or saved profiles on devices. Try selecting your network from the list of saved networks on your phone, tapping "Forget network," and then re-entering the password.
The second issue is character incompatibility. If you used emoji or rare characters in the name, older laptops may not display the network. Go back to the settings and select only letters and numbers.
The third situation is when the router freezes after applying the settings. This is rare, but it does happen. In this case, a physical reboot will help: unplug the router from the outlet for 10 seconds, then plug it back in. After 2-3 minutes, it should start working again with the new name.
⚠️ Please note: Equipment specifications and interfaces are subject to change. Always check the latest documentation on the router manufacturer's official website or in your provider's account.
If nothing helps, the problem may lie in a hardware malfunction or the need to update the router firmware, which can be done through the section Administration -> Firmware Update.
Is it possible to use Russian letters in the Wi-Fi name?
Technically, the standard allows for the use of UTF-8, but in practice, this causes a host of problems. Older devices (printers, game consoles, IoT gadgets) often see gibberish instead of letters or don't see the network at all. It's better to use the Latin alphabet.
What should I do if I forgot the password for my router's web interface?
If the default password on the sticker doesn't work, it's been changed. The only way to restore access is to perform a factory reset. To do this, press and hold the Reset button on the router for 10-15 seconds. All settings, including the network name and internet password, will be reset.
Does the length of a network name affect internet speed?
No, the SSID length (up to 32 characters) does not affect data transfer speed or connection stability. However, extremely long names are difficult to enter manually on devices without a keyboard, such as TVs or consoles.
Do I need to change the network name when I buy a new router?
If you want all your devices to automatically connect to the new router without reconfiguring, you can give the new device the same name and password as the old one. This will save time.