Changing the default name of your wireless network is the first step to personalizing your home internet and increasing its security. Many users face the need to rename SSID (Service Set Identifier) to easily locate your router among numerous neighboring signals or simply hide the device model from prying eyes. In the case of equipment from MGTS, this process has its own specifics, depending on the specific terminal model, whether it's Sagemcom, Eltex or Sercomm.
The procedure for changing the parameters does not require in-depth knowledge of network technologies, but it does require attention, since after changing the name, you will need to reconnect all your devices. Be sure to prepare a new password in advance, as the security system may require you to re-enter it for all devices after changing the SSID. In this article, we'll explore all the nuances of setting up various router models installed by your ISP and help you avoid common mistakes that can lead to network loss.
It's worth noting that modern MGTS routers often operate in two frequency bands: 2.4 GHz and 5 GHz. This means you may need to configure names for two different networks to ensure compatibility with older devices and high speeds for newer ones. Properly setting these parameters directly impacts connection stability and ease of internet use in your home or office.
Preparing to change router settings
Before making any changes to your equipment configuration, ensure your current connection is stable. If you plan to change settings wirelessly, ensure the signal is stable, as the connection may be briefly interrupted when applying the changes. It's best to configure the settings by connecting your computer to the router via LAN cable, this will eliminate the risk of losing access to the web interface at the most crucial moment.
You will also need your login credentials to access the control panel. Often, the default login and password are those found on the sticker on the bottom of the device, but for MGTS equipment, these credentials may be unique. In some cases, administrative access is protected by a password you set yourself when you first activated the service.
⚠️ Note: If you change settings via WiFi, be prepared for the connection to be disconnected after saving the new network name. You'll need to find the new network in the list of available networks and re-enter the password.
To successfully log into the router, ensure your browser isn't using proxy servers, which can block access to local addresses. It's also recommended to disable third-party antivirus firewalls during setup to prevent them from interfering with data packet transmission between your computer and the router.
Login to the router control panel
Access to the settings is via the web interface built into the router firmware. To do this, open any browser and enter the gateway's IP address in the address bar. For most MGTS devices, the default address is 192.168.0.1 or 192.168.1.1If none of these addresses open, check the network adapter settings on your computer or use the command line.
In the authorization window that opens, you will need to enter your login and password. For equipment Sagemcom And Eltex These details are often default (e.g., admin/admin), but the provider may have changed them remotely. If the default combinations don't work, try finding the details on a sticker inside the device or contact MGTS technical support to reset the administrator password.
The interfaces of different models may differ visually, but their operating logic remains the same. After successfully logging in, you'll see a status page displaying the connection type, router uptime, and the number of connected clients. This is where we'll navigate to the wireless network configuration sections.
Find the Wireless Network (WLAN) section
After logging in, the main menu will open. Depending on your firmware version, the section you're looking for may have different names. Look for the tabs with these names. WLAN, Wireless, WiFi or Wireless networkIn routers Sagemcom F@st 2804 And 3890 This section is often placed in the top horizontal menu.
Within the WLAN section, there are usually subsections responsible for basic settings, security, and MAC address filtering. We need the "Basic Settings" item or Basic SettingsThis is where the field is located. SSID, which is responsible for the visible name of your network. In some MGTS firmware versions, settings for the 2.4 GHz and 5 GHz bands may be separated into different tabs.
Pay attention to the "Enable SSID Broadcast" option. If you want the network to be hidden and not appear in the general list of devices, uncheck this box. However, for normal home use, it's best to leave SSID broadcast enabled to avoid complicating the process of connecting new devices.
| Router model | Path to settings | Name parameter |
|---|---|---|
| Sagemcom F@st 2804 | Setup → WLAN → Basic | SSID Name |
| Sagemcom F@st 3890 | Local Network → WLAN | SSID |
| Eltex NTU-2 | Network → WLAN → General | Wireless Network Name |
| Sercomm | Settings → WiFi | Network Name (SSID) |
The process of changing the network name (SSID)
Having found the field SSID Name or "Network Name," delete the current value. The old name often contains the provider's abbreviation or router model, which is undesirable from a security standpoint, as it gives hackers clues about potential vulnerabilities of a specific model. Create a unique name that is easy to identify but does not contain personal information, such as an apartment number or last name.
If your router is dual-band, you'll see two name fields: one for 2.4 GHz and one for 5 GHz. It's recommended to give them similar but distinct names, such as Home_WiFi_24 And Home_WiFi_5GThis will help you manually select a faster band for TVs and laptops, leaving the 2.4 GHz band for smart bulbs and older smartphones.
After entering the new name, be sure to click the "Save" button or ApplyThe system may warn you that the changes will only take effect after you reboot the device or reconnect. At this point, the router's WiFi indicators may briefly flash. Don't be alarmed; this is a standard procedure for applying new configuration files.
☑️ Check before saving
Setting up security and password
Changing the network name is the perfect time to review your password. In the same section where you changed the name, find the security settings (Security). Make sure the encryption mode is selected. WPA2-PSK or WPA3, if your devices support the new standard. Using an outdated protocol WEP or an open network makes your traffic vulnerable to interception.
Your password should be complex, at least 8 characters long, and include uppercase and lowercase letters and numbers. Avoid simple combinations like "12345678" or your date of birth. A strong password will protect you not only from your neighbors using your free internet but also from attacks via your local network, where an intruder gains access to files on your computer.
⚠️ Please note: MGTS router interfaces can be updated remotely by the provider. Button locations and menu item names may differ slightly from those described in the instructions.
After setting the new password, save the settings. The router will apply the new encryption rules, and all previously connected devices will lose connection to the network. This is a normal security response. You'll need to go to each device (TV, phone, tablet), select the network with the new name, and enter the updated access key.
What should you do if you forgot your new password?
If you set a strong password and forgot it, you can't recover it through the web interface for security reasons. The only solution is to reset the router to factory settings (use the Reset button on the router), after which you'll have to reconfigure your internet connection, possibly with the help of an MGTS specialist.
Solution and typical mistakes
Sometimes users encounter a situation where settings aren't saved or a new name doesn't appear in the list of available networks. One common cause is the browser cache or the device itself. Try clearing the browser cache or accessing the router settings from another device, such as a smartphone.
Another issue is related to the broadcast channel. If you're in an apartment building, the airwaves may be congested. If the network is unstable after changing the name, try changing the channel in the WLAN settings. Auto to a fixed number (for example, 1, 6, or 11 for the 2.4 GHz band). This often helps improve connection speed and stability.
It's also worth checking that the "Guest Network" feature isn't enabled. Sometimes users change the name of their primary network, and guests connect to the guest network, which hasn't changed. Make sure you're editing the settings for the network (Main SSID) you regularly use.
Frequently Asked Questions (FAQ)
Can I use Russian letters or spaces in my WiFi name?
Technically, some routers support Cyrillic characters, but this may cause problems displaying the name on older devices, game consoles, or smart devices. It is recommended to use only Latin letters, numbers, and hyphens to avoid encoding conflicts.
Will the network name be reset when updating the firmware of the MGTS router?
Typically, user settings, including the SSID and password, are saved during automatic firmware updates from your ISP. However, if you completely replace your equipment, you'll need to re-enter them using the setup wizard.
Does the length of a network name affect internet speed?
The length of a network name (SSID) has virtually no impact on data transfer speed. However, overly long names can take up more space in the service frames when a device searches for a network. In a crowded environment, this could theoretically add minimal latency to the connection, but won't affect speed.
What should I do if my router stops distributing internet after changing its name?
Changing the network name shouldn't affect internet access. If the connection is lost, check the indicators on the router. Is the "Internet" or "WAN" indicator lit? If not, the problem is with your ISP or cable, not your WiFi settings.