Changing your wireless network's default settings is the first step to securing your home internet connection. Many users leave the default settings on the sticker inside their device, leaving their network vulnerable to hacking and unauthorized traffic use. MGTS provides subscribers with modern equipment with an interface that makes it easy to manage connection settings.
In this article we will take a detailed look at the change process. SSID (network name) and setting a strong encryption key. Regardless of your terminal model, Sercomm, Huawei or EltexThe basic setup principles remain similar, although the menu layout may differ. Proper configuration will protect your personal data from interception and prevent speed slowdowns due to the connection of third-party devices.
To get started, make sure your device (laptop or smartphone) is connected to the router. This can be done via a cable or through your current wireless network. If you plan to change settings remotely, make sure you have access to the web interface. Otherwise, after changing the settings, the connection will be lost, and you will lose access to the admin panel.
Preparing to change router settings
Before making any changes to the equipment configuration, you must access the web management interface. To do this, open any browser on a device connected to the MGTS network. Enter the gateway IP address in the address bar. Most often, the address used for provider equipment is 192.168.1.1 or 192.168.0.1The exact address is always indicated on the information sticker located on the bottom or back of the device.
After entering the address, the system will request authorization. You will need a username and password to access the settings. By default, MGTS routers often use the following combination: admin / admin or data printed on the same sticker (for example, login admin (And a unique password). If you've previously changed this information and forgotten it, you'll need to perform a factory reset, which will require you to reconfigure your internet.
⚠️ Attention: When resetting the router with the button
ResetAll settings are deleted, including PPPoE or IPoE parameters required for MGTS internet access. Make sure you have a contract with your provider that includes authorization information, or that you can quickly obtain it from technical support.
Once in the main menu, you'll see the connection status and a list of connected clients. The interface may have different color schemes depending on the firmware version. Find the section responsible for the wireless network. It may be called WLAN, Wi-Fi, Wireless network or WirelessThis is where the editing fields you're looking for are located.
Step-by-step instructions for Sercomm routers
Equipment brand Sercomm is one of the most widely used devices in the MGTS network. These devices are characterized by stable operation and a user-friendly interface. After logging in, go to the top menu and select the WLAN or WLAN settingsThe main parameters of the radio module are displayed here.
In the window that opens, find the field SSID or Network name (SSID)Enter the desired name there, which will be displayed when searching for networks on phones and laptops. Use Latin characters to avoid encoding issues on older devices. Below is the password field, often labeled as Pre-Shared Key, WPA Passphrase or Security key.
☑️ Check before saving
Pay special attention to the encryption type. In the drop-down list Security Mode or Security mode a protocol must be selected WPA2-PSK or WPA/WPA2-PSKThis will ensure maximum protection. Avoid using the outdated standard. WEP, which can be hacked in a few minutes. After entering all the data, be sure to click the button Apply or Save at the bottom of the page.
After applying the settings, the router will reboot the wireless module. Your device will lose connection to the network because its name will change. You'll need to find the new network again in the list of available networks and enter the password you set. If the connection fails, try deleting the old network from your device's memory ("Forget Network") and reconnecting.
Setting up Wi-Fi on Huawei and Eltex terminals
White routers Huawei and vertical terminals Eltex have a slightly different logical interface, but the essence of the actions remains the same. In the menu Huawei you need to go to the tab WLAN, then select WLAN Basic Configuration or Basic settingsHere in the field SSID Name a new name is entered.
To change the password on devices Huawei it is often necessary to go to a subsection WLAN Security or SecurityIn the field WPA PreSharedKey Enter a new, complex password. On devices Eltex the path may look like this Network -> WLAN -> SSID. Interface Eltex more strict and technical, but the fields are named in a standard way.
⚠️ Note: On dual-band routers (supporting 2.4 GHz and 5 GHz), settings may apply separately to each band. Make sure you change the name and password for both bands, or combine them into a single network with the same name if this feature is enabled (
Smart Connect) is supported and enabled.
If the internet on your TV or set-top box stops working after changing the password, be sure to update the Wi-Fi information in the settings of these devices, as they do not change the password automatically.
What to do if the interface does not open?
If the 192.168.1.1 page doesn't load, check if you have an automatic IP address (DHCP) enabled. Also, try using incognito mode in your browser or a different browser (Chrome, Firefox). Sometimes clearing the DNS cache with the ipconfig /flushdns command in the command line helps.
Table of standard parameters for different models
For ease of comparison, we've provided the key specifications and default settings of popular equipment models installed by providers. This will help you navigate the process if you don't know the exact model of your device.
| Device model | Entrance address | Default login | Default password |
|---|---|---|---|
| Sercomm RS820 | 192.168.1.1 | admin | admin (or from the sticker) |
| Huawei HG8245H | 192.168.100.1 | telecomadmin | admintelecom |
| Eltex NTU-RG-1401G-W | 192.168.1.1 | admin | admin |
| Sagemcom F@st 2804 | 192.168.1.1 | admin | admin |
The default passwords listed in the table are only valid for initial login. It is recommended to change the administrator password in the section immediately after the first login. Administration or Systemto prevent outsiders from changing your router settings.
Recommendations for creating a strong password
The security of your network directly depends on the complexity of the password you choose. Simple combinations like 12345678 or password They are automatically generated in seconds by programs. The password must be unique and not used on other websites.
The optimal length for a Wi-Fi password is 12 to 20 characters. It's recommended to use a mix of uppercase and lowercase letters, numbers, and special characters (if your router supports them). However, since the password must be entered manually on guest devices, overly complex characters can be inconvenient. Find a balance between security and convenience.
- 🔐 Use phrases: instead of
Tr0ub4dor&3better to takeCorrectHorseBatteryStaple- longer and easier to remember. - 🚫 Avoid personal information: Don't use birthdays, phone numbers, or pet names that are easy to guess.
- 🔄 Change your password periodically: update your access key every 6-12 months, especially if you have had a lot of guests.
Common problems and their solutions
After changing settings, users may experience devices no longer seeing the network or being unable to connect. This is often due to DNS cache issues or errors in the wireless adapter drivers. Try rebooting the router by unplugging it for 10-15 seconds.
If the problem persists on only one device (e.g., a Windows laptop), try "Forgetting" the network in the Wi-Fi settings and reconnecting. In rare cases, routers Sercomm They may freeze when changing settings frequently. In this case, a full reset and setup from scratch helps.
⚠️ Note: If you changed the broadcast channel or channel width along with the name, older devices may not see the network. Return the channel width to
Autoor20/40 MHz, if there are problems with visibility.
It's also worth checking if MAC address filtering is enabled. If this feature is enabled, even with the correct password, a new or updated device won't be able to connect until its address is whitelisted in the router settings.
FAQ: Frequently Asked Questions
Is it possible to change the network name through the MGTS app?
Yes, if you use the proprietary MGTS Home or My MGTS app, there's often a section for managing Wi-Fi. However, full functionality, including changing encryption type and hiding the SSID, is only available through the web interface using the IP address.
What happens if I forget my new Wi-Fi password?
It's usually impossible to view the saved password in plain text in the router settings (it's hidden by asterisks). You'll have to either remember it or reset the router to factory settings using the button. Reset, after which the network will return to the factory name and password from the sticker.
Does the length of the network name (SSID) affect speed?
Technically, a longer name takes up more space in control frames, but in modern Wi-Fi standards, this impact is negligible and imperceptible to the user. However, for compatibility with older devices, it's best to limit the name to 32 characters.
Do I need to change my router administrator password?
Yes, this is critically important. The Wi-Fi password protects you from free internet, and the admin panel password (admin) protects your equipment from complete reconfiguration by intruders.