How to change the Wi-Fi network name on a Beeline router: 3 methods with photos

Have you noticed that your Wi-Fi in the list of available networks it is called something like Beeline_1234 or Pirelli_DSL-123A? Such standard names not only look unsightly, but also create security issues. Attackers by default SSID (Network ID) can determine your router model and exploit vulnerabilities in specific firmware. Furthermore, if your neighbors have the same Beeline router, the networks will be confused.

In this article you will learn how Change the Wi-Fi name on a Beeline router in 5 minutes—via the web interface, mobile app, or even via SMS. We'll cover the details for popular models (Sagemcom F@st 2804, Pirelli DRG A225, Sercomm RV6699), we will explain why you cannot use Cyrillic in the network name, and show you how to avoid disconnection when changing SSIDAll instructions are valid for routers manufactured by Beeline between 2020 and 2026.

Why you should change the default Beeline Wi-Fi name

Many users don't change the factory network name for years, without even realizing the risks. Here 3 reasonsWhy you should do this right now:

• 🔒 Security: By default SSID Hackers determine the router model and look for known vulnerabilities. For example, for Pirelli DRG A225 There are exploits that allow you to guess a password in a few hours.
• 📶 Connection stabilityIf your neighbors have the same Beeline router, their devices may automatically connect to another network with the same name but a stronger signal.
• 🏠 Convenience: The name seems to be Apartment_Ivana_5GHz It will immediately show you which network is yours, especially if you have multiple access points.

Additionally, standard names often contain the router's serial number (e.g. Beeline_A1B2C3). This information could be useful to scammers for social engineering—for example, when calling Beeline support and asking to "change the password because the router is broken."

Preparing to change your network name: What you need to know

Before you change SSID, do it 4 mandatory steps:

Pay special attention new network nameBeeline (like most routers) only supports:

• 🅰️ Latin letters (A-Z, a-z)
• 🔢 Numbers (0-9)
• 🔹 Symbols _-. (hyphen, underscore, period)

The name length is from 1 to 32 characters. Using Cyrillic or emoji will prevent some devices (especially older smartphones and printers) from seeing your network. Also, avoid spaces - replace them with underscores (My_WiFi instead of My WiFi).

⚠️ Warning: If you use Mesh system from Beeline (for example, Beeline Smart Wi-Fi with multiple dots), change SSID The settings on the primary router will automatically apply to all nodes. Do not disable additional access points during the process!

Method 1: Change the Wi-Fi name via the router's web interface

This is the most reliable method, working on all Beeline router models. You'll need a computer, laptop, or smartphone connected to the router's network.

Instructions for most models (Sagemcom, Pirelli, Sercomm):

1. Open your browser and type in the address bar 192.168.1.1 or 192.168.0.1If none of the addresses work, check the sticker on the router - it may indicate a different IP (for example, 192.168.1.254).

2. Enter your login and password. The default is:

   • 🔑 Login: admin or beeline
   • 🔑 Password: admin, beeline or the last 8-digit number from the router sticker

If the password doesn't work, it's probably already been changed. In this case, reset the router using the button. Reset (hold for 10 seconds).

Go to the section Wi-Fi or Wireless network (The name depends on the model). For routers Sagemcom F@st 2804 the path will be like this: Interface → WLAN → Basic Settings.

Find the field SSID or Network name (2.4 GHz)If you have a dual-band router, you will see two fields - for 2.4 GHz And 5 GHzEnter new names for each range.

Save the changes by clicking the button Apply or SaveThe router will reboot (this is normal).

After rebooting, you'll need to reconnect to the network with the new name. If your device can't find the network, check:

• 🔄 Is Wi-Fi turned off on your router (the indicator should be on)?
• 📵 Is Airplane Mode enabled on your device?
• 🔍 Have you entered the new network name correctly (case-sensitive)?

Method 2: Change the SSID via the My Beeline mobile app

If you have a Beeline account, you can change the network name through the official app. This method is convenient when you don't have access to a computer.

Step-by-step instructions:

1. Download the app My Beeline (Android/iOS) and log in.

2. Go to the section Internet → My Devices → Wi-Fi Settings.

3. Select your router from the list. If it is not there, click Add a device and enter the serial number from the sticker.

4. Find the field Network name (SSID) and enter a new name. For dual-band routers, there will be separate fields for 2.4 and 5 GHz.

5. Save the changes. The router will reboot automatically.

Please note: the app does not always display all router settings. If the section Wi-Fi settings missing, use web interface (Method 1). Also, you can't change it in the app. region or Wi-Fi channel - these parameters are only available through the browser.

⚠️ Attention: The "My Beeline" app sometimes experiences an error when saving Wi-Fi settings for routers Sercomm RV6699If the network doesn't appear after changing the name, check the settings in the web interface—the changes may not have been applied.

Method 3: Changing the network name via SMS (for older models)

Beeline offers the ability to control some router settings via SMS commands. This method works for models released before 2022 (Huawei HG8245, some versions Pirelli).

Instructions:

1. Send SMS to the number 7377 with text:

   wifi name NEW_NETWORK_NAME

   Example: wifi name Ivan_WiFi_5G

2. Wait for a confirmation response. This usually takes 1-2 minutes.

3. After receiving the SMS, the router will reboot. Connect to the network with the new name.

Limitations of the method:

• ❌ Doesn't work for dual-band routers (only 2.4 GHz changes)
• ❌ You cannot use spaces or special characters
• ❌ Not all models support this command

If you receive an error message after sending an SMS, use the web interface or app. Also, make sure the phone number you're sending the command from is linked to your Beeline contract.

Common mistakes and their solutions

When changing the Wi-Fi name, users often encounter serious problems. We've compiled 5 most common mistakes and ways to fix them:

If none of the methods helped, check:

• 🔌 Is the router powered (indicator) Power should be green)
• 📡 Is the router in the offline mode? Bridge (in this case, Wi-Fi is disabled)
• 🔄 Is your antivirus blocking access to your router settings?

What to do if you forgot your router password?

If you have forgotten your password for logging into the web interface, reset the settings using the button Reset (hold for 10-15 seconds). After this, the login and password will become standard (admin/admin or beeline/beeline). Please note: resetting will also restore the default Wi-Fi name and network password!

Additional Wi-Fi settings worth changing

While you're changing the network name, check other important settings:

• 🔐 Wi-Fi password: Use at least 12 characters with a combination of letters, numbers and _-.Avoid simple sequences like 12345678.
• 📡 Wi-Fi channel: If you have many networks in your home, select the channel manually (for example, 6 or 11 for 2.4 GHz). Automatic selection often works poorly.
• 📶 Signal strength: For small apartments it is enough 50-70%Reducing the power reduces interference to neighbors.
• 🔄 Opening hours: If you have devices older than 2015, set the mode 802.11n instead of 802.11ac.

For Beeline routers with firmware GPON (For example, Sercomm RV6699) also recommended:

• 🔗 Disable WPS (the vulnerability allows one to guess the PIN in a few hours)
• 🌐 Turn on Guest network for visitors (with a separate password)
• 🔄 Update firmware in the section System → Software Update

⚠️ Attention: On routers Huawei, which Beeline issued before 2021, after changing Wi-Fi settings, the internet may disappear. In this case, go to Network → WAN and re-save the connection settings to the provider (usually this is PPPoE with login in the format b{contract_number}@beeline.ru).

FAQ: Answers to Frequently Asked Questions

Is it possible to put emoji in a Wi-Fi name?

Technically, some Beeline routers allow you to use emojis in SSID, but we don't recommend doing this. Many devices (especially printers, smart speakers, and older smartphones) don't display these networks correctly. If you really want to, use simple symbols like ⚡ or ★—they're supported by most gadgets.

How can I make the network name appear in Russian?

You can't use Cyrillic directly in the network name—it will cause connection problems. But you can try a trick:

1. Use transliteration: Moya_Set instead of My_Network.
2. Add the apartment or floor number to the name: Kv45_5GHz.
3. In some routers (for example, ASUS(if you connected it to Beeline) you can use Unicode characters, but this does not guarantee compatibility with all devices.

Do I need to change the network name if I have a Beeline mesh system?

Yes, but with caution. In Mesh systems (Beeline Smart Wi-Fi) all access points use the same network name. When changing SSID on the main router:

• All additional points will automatically update the name.
• The devices will be temporarily turned off (for 1-2 minutes).
• If there is no network after changing it, check whether the additional points have disconnected from the main router (the connection indicator should be green).

Do not change the network name if your Mesh system is currently being updated.

How to restore the default Wi-Fi name?

To return the network to its factory name (Beeline_XXXX), reset the router:

1. Press and hold the button Reset (usually it is recessed into the body and requires a paper clip).
2. Hold for 10-15 seconds until the indicators start flashing.
3. After rebooting, the network name and password will be reset to the default ones (indicated on the router sticker).

Please note: Resetting will also erase all your settings, including your Wi-Fi password and internet connection settings.

Is it possible to change the network name by calling Beeline support?

Technically, support operators can change SSID remotely, but only if:

• You are the owner of the contract.
• The router supports remote control (most models after 2020).
• You can confirm your personal information (passport, code word).

However, we do not recommend this method because:

• The operator may make a mistake in the name.
• You will have to give the new password over the phone (not secure).
• Support does not always change the settings for both bands (2.4 and 5 GHz).