Changing the name of a wireless network is one of the first tasks a new home internet subscriber faces. The standard name assigned by the provider typically includes the device model and a series of numbers, which is unsightly and uninformative. Furthermore, in apartment buildings, confusion often arises when neighbors see dozens of identical networks with similar identifiers. Renaming a network It not only helps you tidy up, but also increases the visibility of your connection among your guests' gadgets.
Changing the broadcast network parameters is done through the router's web interface. MTS uses equipment from various manufacturers, so the menu appearance may vary, but the logic remains the same. You'll need any device with a browser and access to the operator's local network. In this article, we'll cover the steps for different terminal models in detail.
Before making any changes, it's important to understand the difference between a network name (SSID) and a password. SSID — This is the visible name that appears in the list of available connections on smartphones and laptops. This is what we'll be editing. After changing the name, all previously connected devices will lose connection and require re-authorization with the new ID.
Preparing for equipment setup
To access the control panel, you must be within the local network. This means your computer or phone must be connected to the MTS router either via cable or Wi-Fi. If you plan to change the wireless network name, it's best to use a wired connection to avoid losing connection when the router reboots.
You will need to know the gateway's IP address. In most cases, for MTS equipment, this address is 192.168.0.1 or 192.168.1.1Login information is also often found on a sticker on the bottom of the device. The default login and password are also located there, and are usually admin.
⚠️ Important: If you're changing settings via Wi-Fi, make sure the signal is stable. If the connection is interrupted while saving the configuration, you may have to reset the router to factory settings.
Open any modern browser (Chrome, Firefox, Opera) and enter the IP address in the address bar. Don't use the search bar, just the address bar. If the page doesn't load, check your network card settings: Obtaining an IP address should be set to Automatic (DHCP).
Login to your MTS router account
After entering the gateway address, the system will request authorization. Standard login credentials for MTS-issued equipment are often standardized. Login: admin, password: admin or 1234If these combinations don't work, turn the router over and look for the serial number sticker—the information may be specific to your model. Huawei or ZTE.
The interface of modern MTS routers is designed as a single control panel. It displays the connection status, a list of clients, and basic settings. We're interested in the section responsible for wireless technologies. It may be called "Wi-Fi," "Wireless Network," "WLAN," or "Home Network."
In older interface models, the menu may be presented as a vertical list on the left. In newer firmware versions, settings are often grouped into cards. Look for the tab with an image of an antenna or wireless signal. This is where the setting is located. SSID, which is the name of your network.
| Router model | Entrance address | Default login | Default password |
|---|---|---|---|
| Huawei HG8245H | 192.168.100.1 | telecomadmin | admintelecom |
| ZTE F670 | 192.168.1.1 | admin | admin |
| Keenetic Extra | 192.168.1.1 | admin | 1234 |
| Eltex NTU-2W | 192.168.0.1 | admin | admin |
If the default passwords were changed earlier and you don’t remember them, you will have to perform a full reset (Reset). There's a small hole on the device's body that you need to press with a paperclip for 10-15 seconds. After that, the router will reset to factory settings, and you'll be able to log in using the credentials on the sticker.
What to do if the address 192.168.1.1 does not open?
Try clearing your browser cache or using incognito mode. Also, check if your system has a static IP address that conflicts with your router's address. In rare cases, your ISP can change your gateway address remotely.
Changing the network name (SSID) on different devices
The renaming process varies by equipment manufacturer. MTS installs terminals from various vendors, and their interfaces vary. Let's look at the main scenarios for popular models.
For routers Huawei (HG8245, EG8145 series) After logging in, go to the "WLAN" tab. Here you'll see the "SSID Name" or "Network Name (SSID)" field. Enter the desired name using Latin characters. Avoid Cyrillic characters, as some older devices may display Russian letters incorrectly, displaying gibberish instead.
In devices ZTE The path often looks like "Network" -> "WLAN" -> "SSID Settings." There's also a field for editing the name. Some ZTE models support two bands (2.4 GHz and 5 GHz). You can set the same name for both bands or different ones to manually select the connection speed.
⚠️ Note: Using special characters in the network name (e.g., quotation marks, commas, dollar signs) may prevent some smart devices (lamps, plugs) from connecting. Use only letters and numbers.
If you have a router installed Keenetic (formerly ZyXEL) has the most user-friendly interface. In the "My Networks and Wi-Fi" menu, you can not only rename your primary network but also create a guest network with a separate name. This is convenient for temporarily granting visitors access without giving them access to your primary files.
Setting up security and password
Changing your network name is a good reason to think about security. While you're in the Wi-Fi settings menu, it's a good idea to check the encryption type. The current standard is WPA2-PSK or newer WPA3. Obsolete protocol WEP or open mode (Open) you can’t do this, because your data will be visible to all your neighbors.
Your password should be complex but memorable. Use a combination of upper- and lower-case letters and numbers. The minimum length is 8 characters; 12 or more is optimal. Avoid simple sequences like "12345678" or your date of birth.
Some MTS routers have a "Hide SSID" feature. If you enable this option, the network will disappear from the general list, requiring you to manually enter the name on each device to connect. This gives a false sense of security, as professional tools easily detect hidden networks, and significantly reduces usability.
☑️ Wi-Fi Security Check
Common problems and their solutions
After changing the name, users often encounter problems with their devices not seeing the new network. This is normal: the devices remember the old configuration. You need to go to the Wi-Fi settings on your phone or laptop, find the old network (it may show as "Saved, but not connected"), and select "Forget network" or "Delete profile."
Another problem is name conflicts. If you named your network "Home" and your neighbor's network is also named "Home," devices may try to connect to one or the other, especially if the passwords are different. A unique name will help avoid confusion in the future.
If your router stops sharing internet after saving the settings, check the connection status in your MTS account or through the MTS Home app. Sometimes changing Wi-Fi settings requires rebooting the modem. Also, make sure you haven't accidentally disabled the radio module by unchecking the "Enable WLAN" box.
Optimizing wireless network performance
Renaming your network can improve its performance. MTS router settings often allow you to select a broadcast channel. In apartment buildings, the airwaves are congested, and automatic channel selection isn't always effective. Use Wi-Fi analyzer apps on your smartphone to find a free channel and save it in your router settings.
It's also worth paying attention to the channel width. For the 2.4 GHz band, it's better to set 20 MHz, if you have many neighboring networks, or 40 MHz, if the air is clear. For the 5 GHz range, the optimal width is 80 MHzThese settings are located in the same section as the network name, often in the "Advanced" or "Advanced" tab.
Regularly updating your router's firmware is essential for stability. Manufacturers release updates that patch vulnerabilities and improve wireless module performance. Check your firmware version in the "System" or "Administration" section. If there's an "Update" button, use it after saving your current settings.
⚠️ Please note: Router interfaces and functionality may vary depending on the firmware version provided by your operator. If you don't see the described options, check the official instructions on the MTS website or contact technical support, as your operator may restrict access to some advanced settings.
FAQ: Frequently Asked Questions
Is it possible to use Russian letters in a Wi-Fi network name?
Technically, modern standards allow for the use of UTF-8, but in practice this causes problems. Older phones, Windows 7 laptops, smart home devices, and game consoles may display the name as a jumble of incomprehensible characters or not see the network at all. It is recommended to use only Latin characters.
Do I need to re-enter my password on all devices after changing my name?
Yes, it is. For your smartphone or computer's operating system, a new network with a new name is a completely new connection, even if the password remains the same. The old connection profile is tied to the old SSID and is no longer valid.
Does the length of a network name affect internet speed?
No, the length of the SSID name does not affect data transfer speed. However, an extremely long name (more than 32 characters) may not be supported by some devices or may be truncated when displayed. The optimal length is 5 to 15 characters.
What should I do if the Internet on my TV set-top box disappears after changing my name?
You need to reconfigure the connection on your set-top box. Go to the network settings on your TV or set-top box, find your new network name, select it, and enter the password. If your set-top box only supports 2.4 GHz, make sure you haven't hidden this network or renamed only the 5 GHz band.