Modern smartphones such as Samsung Galaxy A50TVs have high-resolution screens, but viewing content in a group or simply for a more immersive experience often requires a larger display. Fortunately, wireless data transfer technologies make it easy to stream content from a mobile device to a large TV screen, as long as both devices support Wi-Fi Direct or Miracast. This eliminates the need to search for adapter cables and tangled wires, providing a clean and convenient connection.
In this article, we will take a detailed look at all the available methods to connect your Samsung A50 Wirelessly connect to your TV. We'll explore the built-in features of One UI, third-party apps for Android TV, and the nuances of working with different TV brands. You'll learn how to set up a stable connection and what to do if devices can't see each other on the same network.
The main advantage of this method is the absence of latency typical of low-quality wired alternatives and freedom of movement around the room. However, for the project to be successful, it's crucial that the router is functioning correctly and that the firmware of both devices is updated to the latest versions. Below, we'll walk you through all the setup steps step by step.
Preparing equipment and a Wi-Fi network
Before attempting to sync devices, you must ensure basic compatibility and correct network settings. Wi-Fi router The phone is the central link in this chain, so make sure it's broadcasting a signal on the 2.4 GHz or 5 GHz frequency supported by both devices. Problems often arise because the phone is connected to a guest network and the TV is connected to the main network, even though they are physically located in the same house.
Check what's on yours Samsung A50 Wireless and Bluetooth connectivity must be enabled, as some discovery protocols use it for the initial handshake. The TV must also be turned on and in connection standby mode or have a signal-receiving app running, unless it's a Smart TV with built-in Screen Mirroring.
It's important to note that older router models may not be able to handle high-definition video streaming, resulting in audio and video desynchronization. In this case, consider upgrading to a more powerful router or reducing the stream quality in the app settings.
- 📶 Make sure your phone and TV are connected to the same Wi-Fi network (same SSID).
- 🔋 Charge your Samsung A50 to 30%, as screen mirroring drains the battery.
- 📡 Check the Wi-Fi signal: it should be strong (at least 2-3 bars) in the location of the TV.
⚠️ Note: If your router has the "AP Isolation" feature, devices on the network will not be able to see each other. This option must be disabled in the router settings via the web interface.
Using Smart View on the Samsung A50
The easiest and most native way to broadcast an image is to use the built-in utility Smart View, which is part of Samsung's One UI. This tool is based on the Miracast standard and doesn't require any additional software. To launch, swipe down twice from the notification shade to open the full quick settings panel, and look for the icon labeled "Smart View" or "Cast."
Once the feature is activated, the phone will begin searching for available devices within range. When your TV's name appears in the list (for example, Samsung TV, LG WebOS or Android TV), click on it. A connection permission request may appear on the TV screen, which you will need to confirm with the remote control.
The Smart View feature not only mirrors your screen but also uses your phone as a remote control. You can adjust the volume, pause playback, or skip tracks without leaving your couch. You can also select the aspect ratio in the streaming settings to ensure the image displays correctly on your TV without black bars.
It's worth noting that when using Smart View, the smartphone may become warmer as the processor is actively encoding the video stream. This is normal, but if the device becomes too hot, the system may automatically reduce screen brightness or stop streaming to protect the components.
Setup via SmartThings app
For owners of the Samsung ecosystem, the app will be an excellent solution SmartThings, which is often preinstalled on the brand's devices. It provides deeper control over connected devices, allowing you to not just mirror your screen, but also control the TV itself as part of a smart home. Launch the app and go to the "Devices" section to add a new gadget.
Tap the plus sign in the upper right corner and select "TV" as the device type. The app will scan the network and offer to add the found TV. Once paired, you'll have access to an extended menu where you can set up automatic routines, such as turning on the TV when you launch certain apps on your phone.
Unlike simple casting, SmartThings lets you stream files, photos, and videos from your gallery directly to the TV's buffer, freeing up your smartphone's resources. This is especially useful if you want to show a presentation or family album without worrying about lag in your phone's interface.
| Function | Smart View | SmartThings | Google Home |
|---|---|---|---|
| Screen mirroring | Yes | Yes | Yes (Cast) |
| TV control | Limited | Complete | Basic |
| Work without the Internet | Yes (Wi-Fi Direct) | Network required | Network required |
| iOS support | No | Yes (partially) | Yes |
Cast via Google Home (for Android TV)
If your TV runs on an operating system Android TV or supports Chromecast built-in technology, the most stable option is to use the app Google HomeIt's preinstalled on most Samsung smartphones and provides low latency when streaming content from the internet. Open the app, find your TV in the list of devices, and tap the "Cast my screen" button.
This method is especially effective for watching videos from the Chrome browser or apps that don't have a built-in "Cast" button. The system uses Google Cast protocols, which are optimized for high-traffic networks, minimizing buffering.
It's important to understand the difference between "Cast Tab" and "Cast Screen." The former only sends browser content, while the latter copies the entire Android interface, including all notifications and messages. Be careful with sensitive information when choosing the latter option.
⚠️ Please note: App and TV interfaces may be updated by developers. Button locations and menu item names may differ from those described in the instructions. Always refer to the latest manuals on the manufacturer's official websites.
Why can't Google Home see my TV?
Make sure the Chromecast service is enabled on your TV. Sometimes you need to restart both devices. Also, check if your antivirus software is blocking local network discovery on your phone.
Third-party apps for non-Smart TVs
Owners of standard TVs without built-in Wi-Fi don't need to despair. There are dedicated receiver apps that can be installed on a smartphone, and the receiving component (often in the form of an APK file) can be installed on the TV if it supports installing apps from a USB drive, or you can use a separate TV set-top box.
One of the popular solutions is a bundle of applications like AirScreen or Miracast ReceiverThey emulate signal reception on the device connected to the TV (for example, via an HDMI dongle on Android). The setup process requires careful attention, but the results are worth it.
First, install the receiver app on the device connected to the TV. Launch it and wait for its name to appear in the list of available networks. Then, on the Samsung A50, search for devices through Smart View. You should see the created virtual device.
- 📥 Download the receiver app APK file to a flash drive.
- 📺 Connect the flash drive to the TV's USB port and install the app.
- 🔗 Launch the app on your TV and select "Miracast" or "AirPlay" mode.
In this case, transmission quality may vary depending on the processor power of the TV set-top box. If you notice a significant audio lag, try changing the video codec or lowering the stream resolution in the receiver app settings.
☑️ Connection diagnostics
Troubleshooting connection and latency issues
Even with proper setup, users may encounter technical difficulties. A common issue is that the TV does not appear in the list of available devices on Samsung A50First, try rebooting your router, as the network routing tables may be full or an IP address conflict may have occurred.
If the image is transmitted, but with a delay or stuttering, this indicates insufficient bandwidth. Try turning off other bandwidth-consuming devices (computers, tablets) or switching your router to a less congested Wi-Fi channel. To do this, you'll need to access your router settings through a browser.
In some cases, resetting the network settings on your phone can help. Go to Settings → General Settings → Reset → Reset Network SettingsThis action will delete saved Wi-Fi passwords and Bluetooth settings, but often resolves issues with incorrect network module operation.
It's also worth paying attention to the operating system version. An outdated Android phone may not support the new encryption protocols used by modern TVs. Check for updates in the section Settings → Software Update.
Frequently Asked Questions (FAQ)
Is it possible to connect the Samsung A50 to a TV without a Wi-Fi router?
Yes, this is possible using Wi-Fi Direct technology. In this case, the phone creates a direct connection to the TV, bypassing the router. However, the functionality may be limited to screen mirroring only, without internet access to the TV.
Why is there no sound on the TV during broadcasting?
Check your audio settings in the Smart View app. Often, the default audio output is on your phone. Click the speaker icon in the streaming control panel and switch the audio output to your TV.
Does phone connection affect internet speed?
Yes, when actively streaming high-quality video, your data usage increases significantly. If your bandwidth is limited, internet speeds on other devices may decrease.
Does the Samsung A50 support Bluetooth audio streaming simultaneously with Wi-Fi?
Technically, this is possible, but when actively sharing your screen via Wi-Fi Direct, priority is given to this channel. Third-party mixer apps may be required to stream audio to external Bluetooth speakers while watching videos on your TV.
How do I turn off the broadcast?
The easiest way is to tap the Smart View icon in the notification shade and select "Disable." You can also turn off Wi-Fi on your phone or simply turn off the TV; the connection will be disconnected automatically.