Connecting Xiaomi TV 1S to Wi-Fi: A Complete Guide with Pictures and Tips

Televisions Xiaomi Mi TV 1S remain a popular choice due to their combination of affordable price, high-quality screen and functionality Smart TVHowever, many users experience difficulties when connecting to a wireless network for the first time, especially when it comes to models with Mi TV 1S 43", 50" or 55", released in different years. In this article, we will examine all the current methods for connecting to Wi-Fi, including manual password entry, using WPS, as well as solutions to common problems such as the "Unable to connect" error or missing networks in the list.

It is important to understand that the process may differ depending on the firmware version (MIUI TV or Google TV (on new models) and router type. We've covered every detail: from connecting to hidden networks to setting up a static IP if your provider requires MAC address binding. You'll also find more information here. Unique information about the Xiaomi 1S's compatibility with modern Wi-Fi 6 (802.11ax) standards — this point is often missed even in official instructions.

1. Preparing for connection: what to check before starting

Before you start setting up Wi-Fi on Xiaomi 1S, make sure the basic requirements are met. This will save you time and eliminate unnecessary remote control manipulation.

• 📶 The router is turned on and distributing the networkCheck the indicators on the router case—the Wi-Fi light should be green or blue (depending on the model). If it's blinking orange, reboot the router using the button. Reset for 10 seconds.
• 🔑 You know the network name (SSID) and passwordIf you have lost your password, you can find it on the router sticker or in the web interface (usually at 192.168.0.1 or 192.168.1.1).
• 📺 The TV is connected to the power supplyAfter the first switch-on Xiaomi 1S It may take up to 2 minutes to load - do not interrupt the process with the power button.
• 🔄 Firmware updatesIf the TV is new, check the software in the menu to make sure it is up to date. Settings → About TV → System Update. Outdated versions may not support modern encryption standards (for example, WPA3).

Pay special attention location of the router. Xiaomi Mi TV 1S Equipped with a built-in antenna with limited power, the signal may be too weak if there are more than two walls between the TV and the router, or if the distance is more than 10 meters. In such cases, we recommend using repeater or Mesh system (For example, Xiaomi Mi Wi-Fi Repeater 2).

⚠️ Attention: If you are connecting a TV in an office or hotel where port isolation (Each router port is assigned to a single device), Wi-Fi may not work even with the correct password. In such cases, contact your network administrator. TV MAC address (you can find it in Settings → About TV → Status) for registration.

2. Method 1: Connecting via the settings menu (main method)

This is the most reliable and universal method that works on all versions. Xiaomi Mi TV 1S, regardless of the year of manufacture. The instructions are suitable for firmware based on MIUI TV And Google TV (if your TV was updated after 2023).

Steps to connect:

1. Turn on the TV with the button Nutrition on the remote control (or on the back panel).
2. Click the button Settings (gear) → select section Network and Internet.
3. Go to Wi-Fi → turn the switch to the position On
4. Find your network in the list of available networks (if there is no network, see Section 5).
5. Select the network name and press OK on the remote control → enter the password using the on-screen keyboard.
6. Confirm the connection with the button Ready or Connect.

If the password is entered correctly, a Wi-Fi icon with the number of signal bars will appear in the upper right corner of the screen within 5-15 seconds. To check the connection speed, go to Settings → Network & Internet → Network StatusNormal values ​​for Xiaomi 1S:

• 📊 Speed: not less than 10 Mbps for SD content, 25+ Mbps for Full HD.
• 📶 Signal level: higher -70 dBm (if below - see Section 6).
• 🔒 Security type: WPA2-PSK or WPA3-PSK (If WEP - change it on the router!).

Checked the Wi-Fi indicator on the router|

Network password at hand|

The TV is on and loaded|

The correct region is selected in the network settings-->

3. Method 2: Quick connection via WPS (without entering a password)

Technology WPS (Wi-Fi Protected Setup) allows you to connect Xiaomi Mi TV 1S Access the network without manually entering a password—just press a button on the router. This method works if:

• ✅ Your router supports WPS (most models do) TP-Link, Xiaomi, ASUS — yes).
• ✅ The WPS function is enabled in the router settings (usually by default).
• ❌ The network does not use hidden SSID (WPS does not work with hidden networks).

Connection instructions:

1. On your TV, go to Settings → Network & Internet → Wi-Fi.
2. Select an item WPS (may be called Fast connection).
3. Click OK on the remote control - the TV will start searching for the router.
4. For 2 minutes press the button WPS on the router (usually indicated by the 🔄 icon or the inscription WPS).
5. Wait for the "Connected" message to appear on your TV screen.

If the connection fails, please check:

• 🔄 The WPS button on the router was held down for no longer than 5 seconds (on some models, a long press resets the settings).
• ⏱️ The time between pressing the button on the TV and the router did not exceed 120 seconds.
• 🔒 WPS is not disabled in the router settings (check in the web interface in the section Wireless Mode → WPS).

⚠️ Attention: WPS is considered less secure than manually entering a password, as it is vulnerable to brute-force attacks. If network security is critical (for example, in an office), disable WPS on the router after connecting the TV.

What to do if there is no WPS button on the router?

On some routers (for example, Keenetic) WPS is enabled via software. Go to the router's web interface and find the section Wi-Fi or Wireless network, and activate the option WPS (PBC)After this, try connecting again on the TV.

4. Method 3: Connect to a hidden Wi-Fi network

If your network is configured as hidden (not broadcasting SSID), Xiaomi Mi TV 1S won't show it in the list of available ones. In this case, you'll have to enter the data manually. Here's how:

1. Go to Settings → Network & Internet → Wi-Fi.
2. Scroll down the list of networks and select Add a network (or Other networks).
3. Enter:
   • Network name (SSID) — exactly the same as on the router (case-sensitive!).
   • Security type - usually WPA2-PSK or WPA3-PSK.
   • Password - if there is one.

Click Save or Connect.

If your TV won't connect to a hidden network, check:

• 🔤 Character case in the network name. MyWiFi And mywifi - these are two different networks.
• 🔒 Encryption typeIf the router has WPA3, and you chose WPA2 — there will be no connection.
• 📡 Wi-Fi channelSome channels (for example, 12–14 in the 2.4 GHz band) may be prohibited in your region. Change the channel on your router to 1–11.

5. Connection issues: Why the Xiaomi 1S can't detect Wi-Fi

If Xiaomi Mi TV 1S If your network doesn't show any networks in the list or returns a "Scanning..." error with no results, the causes could be software or hardware. Let's look at the most common ones:

5.1. Hardware reasons

• 📡 Wi-Fi module malfunctionIf the TV is new, check the warranty. In older models, the module may have come loose from the board. Try gently pressing on the back cover near the antenna (without disassembling it!).
• ⚡ MalnutritionIf the TV is connected via an extension cord or a weak power supply, the Wi-Fi module may not initialize. Plug it directly into a power outlet.

5.2. Software reasons

• 🔄 Firmware failureRestart your TV by holding the power button for 10 seconds. If that doesn't help, reset it to factory settings.Settings → About TV → Reset).
• 📱 Conflict with other devicesTemporarily disconnect all other gadgets from Wi-Fi (especially smart lights, cameras, and other IoT devices).
• 🌍 Wrong regionIn your TV's Wi-Fi settings, make sure your region is selected (e.g. Russia or Europe). The mismatch may block some channels.

If the problem persists, try connecting your TV to the router via cable (Ethernet) and update the firmware. After the update, Wi-Fi often starts working again.

⚠️ Attention: On some firmware versions Xiaomi Mi TV 1S (especially 2020-2021) there is a bug due to which the TV does not see networks in the range 5 GHzThe solution is to force 5 GHz support in the engineering menu (see spoiler below).

How to enable 5 GHz on the Xiaomi 1S (if no networks are visible)

1. On the remote control, press in sequence: Menu → Settings → All settings → General → About TV.

2. Click on the item 5 times MIUI version — the engineering menu will open.

3. Go to Network → Wi-Fi → Band and select 5GHz or Auto.

4. Save the settings and restart the TV.

⚠️ Be careful: incorrect changes in the engineering menu may lead to a system failure!

6. Weak Wi-Fi Signal: How to Boost the Connection on the Xiaomi 1S

If the TV connects to the network, but the video is slow and the pages take a long time to load, the problem is most likely in signal level. Xiaomi Mi TV 1S It doesn't have a powerful antenna, so it's sensitive to interference and distance. Here's how to improve the situation:

6.1. Router optimization

• 📍 Change the location of the routerThe ideal location is 1–1.5 meters above the floor, in the center of the apartment. Avoid placing it near microwaves, cordless phones, and metal objects.
• 🔄 Change Wi-Fi channelUse apps like Wi-Fi Analyzer (Android) or NetSpot (Windows) to find the least crowded channel. For 2.4 GHz, select 1, 6 or 11.
• 📶 Switch to 5 GHzIf your router is dual-band, create a separate network for 5 GHz (it's less susceptible to interference, but has poorer penetration through walls).

6.2. TV settings

• 🔗 Use a static IPSometimes the router's DHCP server "loses" the TV, causing the connection to drop. Set a fixed IP address in the network settings (Settings → Network → IP Settings → Manual).
• 📊 Disable Wi-Fi power savingIn some firmware versions, the TV disables Wi-Fi in standby mode. Find the option in the settings Power Saving → Sleep Mode and disable the option Turn off Wi-Fi.

6.3. Additional equipment

If software methods do not help, consider purchasing:

• 📶 Wi-Fi repeater (For example, Xiaomi Mi Wi-Fi Repeater Pro) - will strengthen the signal in a specific room.
• 🔌 Powerline adapter (For example, TP-Link AV600) - transmits the Internet through electrical wiring and then distributes it via Wi-Fi.
• 🖧 USB Wi-Fi adapter (if your TV has a USB port). For example, TP-Link TL-WN823N (check compatibility!).

7. Alternative ways to connect to the Internet

If you connect Xiaomi Mi TV 1S If you can't connect to Wi-Fi, there are several backup options:

7.1. Connection via cable (Ethernet)

The most stable method is to use a network cable. To do this:

1. Connect one end of the cable to the port LAN on the router, the other one to the connector Ethernet on the back of the TV.
2. In the TV menu, select Settings → Network → Cable connection.
3. Wait for automatic configuration (DHCP) or enter IP manually if required.

Advantages:

• ⚡ Maximum speed (up to 1 Gbps, if supported by the router).
• 🛡️ No interference or connection breaks.
• 🔒 Suitable for enterprise networks with port isolation.

7.2. Mobile Internet via USB modem

If you don't have access to a router, but you have a USB modem (for example, from Megaphone or Beeline), you can connect it directly to your TV:

1. Insert the modem into the USB port of the TV.
2. Go to Settings → Network → Mobile network.
3. Select your operator and connect (you may be asked to enter your PIN).

⚠️ Attention: Not all USB modems are compatible with Xiaomi Mi TV 1SBefore purchasing, check the list of supported devices on the Xiaomi website. Also, keep in mind that mobile data may quickly drain when watching high-definition videos.

7.3. Sharing Internet from a Smartphone (Hotspot)

As a last resort, you can use your smartphone as an access point:

1. Turn on your smartphone modem mode (Settings → Network & Internet → Access Point).
2. On your TV, connect to the created network as you would to a regular Wi-Fi network.

Disadvantages of this method:

• 🔋 My smartphone's battery drains quickly.
• 📶 Low stability (especially if the smartphone is far from the TV).
• 💰 Mobile traffic consumption.

8. Common mistakes and their solutions

Let's look at the typical problems that owners face. Xiaomi Mi TV 1S when connecting to Wi-Fi, and how to fix them.

If none of the methods helped, try reset network settings on TV:

1. Go to Settings → Network & Internet → Advanced.
2. Select Reset network settings.
3. Confirm the action and try connecting again.

In 90% of cases, this solves Wi-Fi problems caused by software glitches.

FAQ: Answers to Frequently Asked Questions

Is it possible to connect the Xiaomi 1S to Wi-Fi without a remote control?

Yes, there are several ways:

• Use the official app Mi Remote (available for Android and iOS) - it emulates a remote control via Bluetooth.
• If the TV has buttons on the body (usually Menu, Volume, Channel), you can manually go to the network settings, but this is inconvenient.
• Connect a keyboard or mouse via USB - in some firmware versions, they work as pointing devices.

If nothing helps, buy a universal remote control (for example, Xiaomi Mi TV Remote) or the original on AliExpress.

Why doesn't Xiaomi 1S connect to Wi-Fi 6 (802.11ax)?

Xiaomi Mi TV 1S does not support Wi-Fi 6 (802.11ax) at the hardware level — maximum standard for this model: Wi-Fi 5 (802.11ac) in the 5 GHz range and Wi-Fi 4 (802.11n) in 2.4 GHz. If your router only works in 2.4 GHz mode 802.11ax, try:

• Disable Wi-Fi 6 in the router settings (set the mode 802.11a/n/ac).
• Create a separate network for legacy devices.
• Use a cable connection or a repeater with support 802.11ac.

How to reset network settings on Xiaomi 1S?

To reset all network settings (including saved Wi-Fi passwords), follow these steps:

1. Open Settings → About TV → Reset.
2. Select Reset network settings (do not confuse with a full reset!).
3. Confirm the action with a password (if requested) or PIN code.

After the reset, the TV will forget all saved networks, and you will have to connect again.

Is it possible to connect Xiaomi 1S to a public network (in a hotel, cafe)?

Yes, but there are some nuances:

• If the network requires authorization through a browser (port isolation), you will need an intermediary device (laptop or smartphone) that will first connect to the network and then distribute the Internet to the TV via USB-ethernet adapter or hotspot.
• Some public networks block traffic from Smart TVs. In this case, changing the network settings will help. DNS on 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google).
• If the network requires you to enter your login/password every time, the TV will not be able to connect automatically; you will need to enter it manually every time you turn it on.

How to update firmware on a Xiaomi 1S without internet?

If Wi-Fi is not working and you need to update your firmware, do the following:

1. Download the latest firmware for your model from the official Xiaomi website (support section). Please note the version: Mi TV 1S 2020 And 2021 there may be different files!
2. Copy the firmware file (usually with the extension .zip or .pkg) onto a flash drive formatted in FAT32.
3. Insert the flash drive into the USB port of the TV.
4. Go to Settings → About TV → System update → Local update and select the file.

⚠️ Don't turn off your TV during the update! The process takes 5-10 minutes.