How to connect Wi-Fi to an Ericsson TV

Modern televisions Erisson transform a regular screen into a multimedia center, but to access the content, you need to establish a connection to the global network. The setup process wireless interface It only takes a few minutes if you know the system menu sequence. Users often encounter difficulties when entering a password or selecting the correct security protocol.

In this article, we'll cover all connection steps in detail, from enabling the module to resolving common errors. Stable signal This will allow you to enjoy high-definition movies without lag or buffering. Please note that the interface may vary slightly depending on your device's firmware version and model.

Before you begin, make sure your router is working properly and is transmitting a signal. Your TV should be in a strong reception area to avoid connection interruptions while watching. If you've just purchased your TV, the initial setup will take a little longer due to the need to update system files.

Preparing the equipment and checking the router

The first step is to check if the access point is working. Make sure that router The router is turned on and the indicators on its body are lit or blinking normally. If other devices, such as smartphones or laptops, connect successfully to the network, there are no issues with the ISP or the router itself.

Please note the frequency range supported by your model. ErissonMost modern TVs operate in the 2.4 GHz band, but newer models can also support 5 GHz. If your router only broadcasts at the higher frequency and your TV doesn't see it, you'll need to adjust your ISP's settings.

Write down the network name (SSID) and Wi-Fi password in advance so you don't have to search for them during setup. Sometimes the system requires manual entry if the automatic search doesn't work correctly. It's also helpful to know the encryption type, although in 99% of cases it's standard. WPA2-PSK.

Step-by-step instructions for connecting via the menu

Turn on the TV and wait for the operating system to fully load. Take the remote control and find the button with a gear icon or the word SettingsIn the window that opens, we're interested in the section responsible for network connections.

Go to the menu Net or NetworkHere you will see a list of interfaces available for connection. Select the item Wireless network or Wi-Fi and move the switch to the position OnThe system will begin scanning the air.

Once the scan is complete, a list of available networks will appear on the screen. Find your router's name in the list and click on it. OKIf the network is hidden, select the option Add a network and enter the name manually.

⚠️ Important: When entering your password, be sure to observe the case of the letters. Uppercase and lowercase characters are treated as different characters by the system, and a mistake in one letter will result in access being denied.

In the window that opens, enter your password using the on-screen keyboard. After entering, confirm the action by selecting ConnectThe TV will try to establish a connection with the router and receive IP address automatically.

Setting up the 2.4 GHz and 5 GHz frequency bands

Data transfer speed directly depends on the selected frequency range. The 2.4 GHz band has greater penetration through walls but is susceptible to interference from household appliances. The 5 GHz frequency provides high speed but has a shorter range.

If your router broadcasts two networks with the same name (Dual Band), the TV Erisson can independently select the optimal one. However, sometimes it makes more sense to separate them in the router settings by assigning different names, for example, HomeWiFi And HomeWiFi_5G.

Parameter	2.4 GHz	5 GHz
Speed	Up to 150 Mbps	Up to 866 Mbps
Range	High	Average
Noise immunity	Low	High
Penetration	Good	Bad

📊 What Wi-Fi band do you use at home?

2.4 GHz

5 GHz

Don't know

Both at once

For viewing 4K video, it's highly recommended to use the 5 GHz band if the TV is in the same room as the router. Otherwise, if the device is in a distant room, it's best to switch to 2.4 GHz for a stable picture.

Troubleshooting connection issues and errors

Sometimes the connection process is interrupted, and the TV displays an error message. The most common cause is an incorrect password or a temporary network service outage. Try rebooting the router by unplugging it for 10-15 seconds.

⚠️ Important: If your TV displays "Unable to connect," check if your router is using MAC address filtering. If this is the case, the device will see the network, but internet access will be blocked.

Another possible cause is a crowded communication channel. If dozens of routers in an apartment building are operating on the same frequency, the signal may be unstable. You can change the broadcast channel to a less crowded one in your router settings.

Make sure the date and time on your TV are set correctly. Incorrect system time can block some applications and security protocols, preventing full network access.

Hidden DNS settings

If your internet connection is working but apps aren't loading, try entering your DNS addresses manually. In your network settings, disable automatic DNS resolution and enter 8.8.8.8 (primary) and 8.4.4.4 (alternate).

Using Wi-Fi adapters for older models

Some budget or older models Erisson These don't have a built-in Wi-Fi module. They require external USB adapters. It's important to purchase a device that's compatible with your specific TV model, as the drivers are built into the firmware.

The list of supported adapters is usually provided in the user manual or on the manufacturer's official website. Chipset-based models are the most common. Ralink or MediatekSimply plug the adapter into a USB port and a wireless connection option should appear in the menu.

If nothing happens after connecting the adapter, check that the USB port is enabled in the system settings. Sometimes, updating the TV's software via a flash drive is required to enable support for external network modules.

Alternative ways to access the Internet

If your wireless connection is unstable, you can always use a wired connection. Cable Ethernet (LAN) ensures maximum speed and interference-free operation. Simply connect the cable from your router to the corresponding port on the back of your TV.

The system automatically detects a cable connection and prioritizes it over Wi-Fi. This is ideal for streaming heavy content or playing games on cloud services where minimal latency is critical.

You can also share your internet connection from your smartphone. Enable the "Hot Spot" feature on your phone and connect your TV to the network. Keep in mind that mobile data usage is fast, so keep an eye on your remaining data.

⚠️ Please note: When using mobile internet, video quality may be automatically reduced due to the speed limitation of your operator's tariff plan.

Frequently Asked Questions (FAQ)

Why does the TV see the network but not connect?

This is most often caused by an incorrect password or encryption type. Try forgetting the network in your TV settings and reconnecting, carefully entering the characters. Also, check that your router hasn't reached its maximum number of connected devices.

Can Erisson be connected to 5GHz Wi-Fi?

This depends on the specific model. If the specifications say 802.11ac or dual-band, then connection is possible. Otherwise, the TV will only see 2.4 GHz networks.

How to reset network settings?

Go to the menu Settings -> General -> NetThere should be an option there. Network reset or Delete profileAfter this, you will need to re-enter your password.

Do I need a special adapter for Wi-Fi?

Only if your model doesn't have a built-in module. You can determine this by the presence of an antenna on the housing or by examining the technical specifications in the product datasheet.