Modern televisions Erisson It's almost impossible to imagine a home without access to the global network, as the internet provides access to online cinemas, streaming services, and firmware updates. However, despite the simplicity of the technology, the initial synchronization process of the receiver with the home network often raises questions for users, especially if they previously used a cable connection or an old router. Proper setup Wi-Fi module on your TV is the first step to comfortably using the multimedia capabilities of your device.
In this article, we will examine in detail the algorithm of actions that will allow you to establish a stable wireless connection between your router and your TV brand ErissonWe'll cover various scenarios, including selecting frequency bands, manually configuring IP addresses, and troubleshooting common errors that owners of this equipment encounter when trying to go online.
Before you begin setting up your TV menu, you need to make sure your equipment is physically ready for use. Your router should be plugged in, connected to your ISP, and successfully sharing internet with other devices, such as smartphones or laptops. If you have one in your home, dual-band router, it is important to understand the difference between frequencies, as older TV models may not see the 5 GHz network.
Preparatory stage and equipment testing
The setup process should begin with an inspection of your existing equipment, as compatibility with communication standards plays a key role in the success of the operation. Make sure your router supports the standard. 802.11n or higher, as older protocols may be unstable or not supported by the TV's firmware. It's also worth checking whether the airwaves are congested with neighboring networks, which is especially important in apartment buildings.
It is important to know the password for your wireless network, as TVs Erisson Requires you to enter it upon first connection. If you forget your password, you can find it on the sticker on the bottom of the router or in the connected computer's settings if it's saved there. Without this access key, authorization on the network is impossible.
⚠️ Note: If your router is broadcasting two networks with the same name (Smart Connect), your TV may attempt to connect to the 5 GHz band and lose signal due to poor wall penetration. In this case, we recommend temporarily separating the networks in your router settings or using the 2.4 GHz frequency for your TV.
For the smart TV system to function correctly, it's also important that the device's date and time are set correctly, although modern models automatically adjust this information after connecting. If the clock is out of sync, some apps may refuse to launch even with internet access. Therefore, before accessing the network menu, check the basic system settings in the "Time and Date" section.
Finding and selecting a wireless network in the Erisson menu
Operating system interface in TVs Erisson The instructions may vary slightly depending on the model year, but the logic remains the same. You need to access the main settings menu using the remote control and find the section responsible for network connections. It's usually marked with an antenna or globe icon and called "Network."
After entering the network settings section, select the connection type "Wireless Network" or "Wi-Fi." The TV will scan the surrounding area and, after a few seconds, display a list of available access points. In this list, find the name (SSID) of your home router, which you specified during its initial setup.
- 📡 Find the name of your network in the list that matches the SSID on your router.
- 🔒 Make sure there is a lock icon next to the network name to confirm that it is password protected.
- 📶 Pay attention to the signal strength indicator: if it shows 1-2 bars, you may need to move the router.
- 🔄 If the network isn't on the list, try refreshing the list or moving closer to the router.
Once you've selected the desired network, press the "OK" or "Connect" button on the remote. The system will prompt you to enter a security password. Be careful when entering characters, as case is important, and visual verification on the TV screen may be difficult due to the font or distance.
What to do if the on-screen keyboard is uncomfortable?
Use the remote app on your smartphone if your Erisson TV model supports Wi-Fi Direct or Bluetooth control. This will allow you to quickly enter a complex password using your phone's full keyboard.
After entering the password, the TV will begin the process of establishing a connection to the router. A loading indicator may appear on the screen during this process. If the password is correct and the signal is stable, you will see a successful connection message, and the "Connected" status will appear next to the network name.
Manually configuring IP and DNS settings
In most cases, automatic settings DHCPThe IP addresses assigned to the TV by the router are working correctly, and no additional actions are required. However, if automatic connection fails or content loading issues occur, manual configuration of the IP address and DNS servers may be necessary. This is especially relevant in complex home networks with multiple routers or specific ISP settings.
To switch to manual mode, select your network from the list of available networks and find "IP Settings" or "Advanced Settings." Change the mode from "Auto" to "Manual." You'll need to enter the IP address, subnet mask, gateway, and DNS servers. This information is usually the same as your router's address, but with the last digit of the device's address changed.
| Parameter | Example of meaning | Description |
|---|---|---|
| IP address | 192.168.1.150 | Unique address of the TV on the network |
| Subnet mask | 255.255.255.0 | Determines the size of the local network |
| Gateway | 192.168.1.1 | Your router's address |
| DNS 1 | 8.8.8.8 | Google's primary DNS server |
| DNS 2 | 8.8.4.4 | Alternative Google DNS server |
Using public DNS servers such as 8.8.8.8 from Google or 1.1.1.1 Cloudflare's DNS service often helps speed up Smart TV interface response and resolve issues accessing certain apps. If your ISP blocks third-party DNS services, reset the settings to automatic or use the addresses provided by your provider.
Using Wi-Fi adapters for older models
Some TV models ErissonTVs released several years ago don't have a built-in Wi-Fi module, but they do support connection via an external USB adapter. This allows you to add wireless functionality to a device originally designed for a wired connection only. It's important to use only compatible adapter models, as the TV may not have drivers for certain devices.
Most often, chip-based adapters are used for these purposes. Ralink or Mediatek, which are often included with the TV or purchased separately as a branded accessory. After connecting the adapter to the TV's USB port, an "External Adapter" option should appear in the network settings menu, or the Wi-Fi menu should simply activate.
- 🔌 Insert the USB adapter into a free USB 2.0 port on the back or side of the TV.
- ⏳ Wait 10-15 seconds for the system to recognize the new device.
- 📡 Go to network settings and check if there are available Wi-Fi networks.
- 📝 Make sure your adapter supports the 802.11n standard, as older 802.11g ones may not provide the necessary speed for video.
⚠️ Note: Not all USB ports on your TV can supply enough power to operate the Wi-Fi adapter. If the adapter isn't detected, try switching it to a different port, preferably one that's color-coded or labeled "Service," if applicable.
It's worth noting that using an external adapter can increase the TV's power consumption and heat buildup around the ports. If you plan to actively stream high-definition content, make sure the adapter has an external antenna for better signal reception, as built-in mini-adapters are often less stable.
☑️ Check adapter compatibility
Troubleshooting connection and stability issues
Even with the correct settings, users may encounter a situation where the TV sees the network but doesn't connect, or the connection constantly drops. One common cause is incompatible encryption standards or router bandwidth congestion. Try changing the router's security type to WPA2-PSK (AES), as it is the most universal and reliable standard for household appliances.
If the issue is low speed or constant video buffering, it's possible that the Wi-Fi channel your router is on is heavily polluted by neighboring Wi-Fi. In your router settings, you can try changing the channel from "Auto" to a fixed channel (for example, 1, 6, or 11 for the 2.4 GHz band), selecting the one with the least congestion. You can use dedicated apps on your smartphone to analyze channel congestion.
Another solution may be to reset the TV's network settings to factory defaults. This will delete all saved passwords and IP configurations, allowing you to start the connection process from scratch, which often helps resolve software glitches caused by accumulated cache.
In rare cases, the problem may be due to outdated TV firmware, which doesn't work correctly with new router models. If possible, connect your TV to the internet via cable or smartphone sharing (in a compatible mode) to check for and install system updates via the "Support" or "About TV" menu.
Alternative ways to access the Internet
If you still can't establish a direct Wi-Fi connection, or the quality of the wireless signal where the TV is installed leaves much to be desired, there is always the option of using a wired connection. Cable LAN ensures maximum stability and data transfer speed, which is critical for