Connecting Wi-Fi to a Fly TV: 3 Proven Methods + Troubleshooting

Televisions Fly Smart TVs require an internet connection to access streaming services, YouTube, a browser, and the company's app store. However, many users encounter difficulties setting up Wi-Fi, especially if they have a non-standard interface or outdated firmware. In this article, we'll discuss all current connection methods (including hidden settings), typical errors and A unique method for restoring the network after resetting the TV to factory settings..

It is important to understand that the connection algorithm may differ depending on the year of manufacture of the TV. For example, models Fly 2020–2022 use firmware based on Android TV 9/10, while newer devices (2023–2026) operate on Google TV or a branded shell. We'll cover general instructions, as well as nuances for specific product lines.

If your TV doesn't see the network, constantly loses connection, or returns an authentication error, you'll find help at the end of the article. table of error codes and ways to eliminate them. And for those who want to optimize the signal, we've added a section on Wi-Fi booster without purchasing additional equipment.

1. Preparing your Fly TV for Wi-Fi connection

Before setting up your network, make sure that:

• 📶 The router is turned on and distributing Wi-Fi (check on your smartphone or laptop).
• 🔌 The TV is connected to the power supply and is fully charged (the power indicator is green/blue).
• 🔄 It's disabled on the router client isolation mode (If enabled, the TV will not be able to connect).
• 🔒 I know my Wi-Fi password (if you forgot it, look on the router sticker or in your provider's personal account).

Please pay special attention to router operating mode. Televisions Fly older than 2021 may not support modern standards Wi-Fi 6 (802.11ax) or WPA3If your router is operating in mixed mode 802.11n/ac/ax, try switching temporarily to 802.11n (in the router settings in the section Wireless → Mode).

⚠️ Attention: If you use dual-band router (2.4 GHz + 5 GHz), TVs Fly most often they only connect to the network 2.4 GHzMake sure this network is enabled and has a separate name (SSID).

Also check if it is enabled on the router MAC address filter. Televisions Fly Sometimes they can't authenticate if their MAC address isn't added to the list of allowed devices. To find your TV's MAC address, go to Settings → About TV → Network Status.

2. Method 1: Connecting via the settings menu (standard method)

This is the most common method and works on most models. Fly, including Fly FS55350U, Fly FS43350S and others. The instructions are valid for firmware based on Android TV And Google TV.

Steps to connect:

1. Turn on the TV and press the button Home (house) on the remote control.
2. Go to Settings (gear icon).
3. Select a section Network and Internet (or Net on older models).
4. Click Wi-Fi and turn on the wireless network (slider to the position On).
5. From the list of available networks, select your Wi-Fi and enter the password.
6. Confirm the connection with the button OK.

If an error appears after entering the password "Unable to connect", try:

• 🔄 Reboot the router (turn off the power for 30 seconds).
• 🔑 Make sure the password is entered correctly (case-sensitive!).
• 📡 Switch the Wi-Fi channel on the router (for example, from Auto on 6 or 11).

Make sure your TV is updated to the latest firmware|

Disable VPN on your router (if used)|

Check if the number of connected devices has been exceeded|

Restart the TV (power button for 10 seconds) -->

On some models Fly (For example, Fly FS32230T) The network menu may look different. If you don't find the section Wi-Fi, try this path:

Settings → All settings → Network → Wireless network

3. Method 2: Connecting via WPS (if the password is unknown)

If you don't remember your Wi-Fi password or don't want to enter it manually, you can use technology WPS (Wi-Fi Protected Setup). This method only works if:

• 🔄 The router supports WPS (button with the inscription WPS or the 🔄 icon).
• 📡 TV Fly WPS compatible (most 2019 and newer models).
• ⚠️ There are no other devices within range of the router attempting to connect via WPS.

Connection instructions:

1. On your TV, go to Settings → Network → Wi-Fi → Advanced.
2. Select Connecting via WPS (or WPS Push Button).
3. Click the button WPS on the router (usually it is located on the back panel).
4. Wait for the message "Connected" on the TV screen (may take up to 2 minutes).

⚠️ Attention: Some providers (eg Rostelecom or MTS) disable WPS by default due to security vulnerabilities. If the button doesn't work, check your router settings in the WPS → Enable.

If WPS doesn't work, try an alternative method - connection via PIN code:

1. From your TV's Wi-Fi menu, select WPS PIN.
2. Write down the 8-digit code that appears on the screen.
3. Log into your router's control panel (usually at 192.168.0.1 or 192.168.1.1).
4. Go to WPS → Add device by PIN and enter the code from the TV.

4. Method 3: Connecting via Ethernet (if Wi-Fi doesn't work)

If the TV Fly stubbornly refuses to connect to Wi-Fi, a temporary solution may be wired connection via an Ethernet cable. This is also useful for:

• 🎮 Online gaming (lower latency).
• 📺 Watching 4K videos (stable speed).
• 🔧 Firmware updates (if over-the-air updates are not possible).

What you will need:

• 🔌 Cable Ethernet (twisted pair, category 5e or higher).
• 📡 Free port LAN on the router.

How to connect:

1. Connect the TV and the router with a cable.
2. On your TV, go to Settings → Network → Ethernet.
3. Select Set up automatically (DHCP).
4. Wait until you receive an IP address (usually takes 10-30 seconds).

If the Internet does not appear:

• Check if the port indicator is on LAN on the router.
• Try another cable (maybe damaged).
• Manually enter the IP address in the TV settings (if DHCP is disabled on the router).

5. Troubleshooting Common Wi-Fi Connection Errors

If the TV Fly If you can't connect to Wi-Fi, first determine the error type. Below is a table of codes and how to fix them:

If the TV Fly Connects to Wi-Fi, but the internet doesn't work:

1. Check if the router is distributing the Internet (connect a laptop or phone).
2. Turn it off proxy server in the TV network settings.
3. Reset network settings: Settings → System → Reset → Reset network settings.

⚠️ Attention: If after resetting the settings the TV stops seeing any Wi-Fi networks, this may indicate hardware failure of the Wi-Fi moduleIn this case, only a service center can help.

For models Fly on Android TV 9 (For example, Fly FS43350U) There is hidden option to reset the network stack, which often solves connection problems:

Settings → Device → Reset → Reset Wi-Fi, Bluetooth & Mobile Data

6. How to boost Wi-Fi signal for a Fly TV

A weak Wi-Fi signal is one of the main causes of video interruptions, slow app loading times, and connection errors. If your TV is far from your router, try these solutions:

Budget methods (without purchasing equipment):

• 📡 Move the router closer to the TV (ideally in the same room).
• 🔄 Change the Wi-Fi channel on the router (for example, from Auto on 1 or 11).
• 🚫 Disable it on your router 802.11r (Fast Transition) - It may conflict with older TVs.
• 🔋 Reduce your router's transmit power to 50–75% (sometimes helps with interference).

Advanced methods (require investment):

• 🛡️ Buy Wi-Fi repeater (For example, TP-Link RE305) and install it between the router and the TV.
• 📶 Replace your router's antennas with more powerful ones (with a gain factor 5–9 dBi).
• 🔄 Set up Mesh network (if you have several routers of the same brand).

For TVs Fly with support 5 GHz (For example, Fly FS55350U) recommended:

• Connect to the network 5 GHz only if the TV is in the same room as the router (the 5 GHz signal passes worse through walls).
• Use channels 36–48 or 149–165 (they are less busy).

7. Updating firmware to fix Wi-Fi issues

If the TV Fly If your device won't connect to Wi-Fi due to outdated firmware, update it. There are two options:

Method 1: Update via the Internet (if Wi-Fi works at least sometimes)

1. Go to Settings → About TV → System Update.
2. Select Update via the Internet.
3. Wait until it is finished (do not turn off the TV!).

Method 2: Update via USB (if Wi-Fi doesn't work at all)

1. Download the firmware for your model from official Fly website.
2. Unzip the archive and copy the file .zip to a flash drive (format FAT32).
3. Insert the flash drive into the TV and go to Settings → About TV → Update via USB.
4. Select the firmware file and confirm the installation.

⚠️ Attention: Some models Fly (For example, Fly FS32230T) require full reset After updating the firmware. If Wi-Fi doesn't work after the upgrade, perform a reset: Settings → Storage & reset → Factory data reset.

If on the site Fly There is no firmware for your model, try to find it on forums (for example, 4PDA) or contact the manufacturer's support. Please specify exact model (written on the sticker on the back of the TV) and the current firmware version (can be found in Settings → About TV).

8. Alternative ways to access the Internet on Fly TV

If there is Wi-Fi on the TV Fly It still didn't work, there are workarounds:

1. Sharing the Internet from a smartphone (USB tethering)

• 📱 Connect your phone to your TV via USB cable.
• 🔄 Turn it on on your phone Modem mode → USB tethering.
• ⚡ On your TV, select Settings → Network → USB Modem.

2. Connecting via a Powerline adapter

If the router is far away and it is inconvenient to lay the cable, use adapters Powerline (For example, TP-Link AV600). They transmit the Internet through electrical wiring:

1. Connect one adapter to the router via Ethernet.
2. Plug the second adapter into the socket next to the TV and connect them with a cable.

3. Using an external Wi-Fi adapter

Some models Fly support the connection of external USB Wi-Fi adapters (for example, TP-Link TL-WN725N). To do this:

1. Buy an adapter with a chip RTL8188EU or RTL8192CU (they are best compatible).
2. Connect it to the USB port of your TV.
3. In the network settings, select the new network.

If none of the methods worked, the problem might be hardware failure TV Wi-Fi module. In this case, contact a service center. Fly or consider connecting via Ethernet or Powerline.

FAQ: Frequently asked questions about connecting Wi-Fi on Fly

Settings → About TV → Software version

Settings → Device → About software