Modern retail outlets require high mobility and stability of equipment, and POS terminals are no exception. Model Verifone VX675 This powerful device is often used in restaurants, off-premise events, and courier services. Its wireless connection allows cashiers to move freely around the premises, significantly speeding up customer service.
The setup process may seem complicated due to the unique interface and numerous parameters that require precise input. However, if you follow all the steps described in this guide, you can set it up on your own. wireless networkThis will save you from having to call a technician and waiting for repairs.
In this article, we'll cover not only the standard connection procedure but also the nuances of setting up a static IP address, which is often required by corporate networks. We'll also cover troubleshooting potential issues so you can quickly resolve any issues. acquiring equipment.
⚠️ Attention: The terminal interface may vary slightly depending on the bank or processing center's firmware. If you don't see the options described, please contact your organization's technical support.
Preparing equipment and checking router settings
Before you begin setting up the terminal itself, you need to make sure the access point is ready. Device Verifone VX675 supports safety standards WPA2 And WPA3, which ensures reliable encryption of transmitted data. Make sure your router broadcasts a 2.4 GHz signal, as older routers may not be able to detect 5 GHz networks.
To successfully log in, you'll need to know the exact network name (SSID) and password. If the network is hidden, you'll need to enter its name manually, taking care to ensure proper case-insensitive access. Corporate networks often require additional information, such as a static IP address, subnet mask, and gateway.
It's recommended to prepare this information in advance to avoid interruptions in the setup process. Write it down on a piece of paper or save it to your phone's notes for quick access.
- 📶 The exact name of the wireless network (SSID) without extra spaces.
- 🔑 WiFi password verified on another device.
- 🌐 Data for a static IP (if required by the network administrator).
- 📡 Make sure the terminal is in a strong signal reception area.
Logging into the terminal administrator menu
To begin configuration, you need to access the system menu. On most devices Verifone This is done through a key combination or by selecting a special item in the cashier menu. The standard method is to press the green power button or a combination 000 (or the password set by the bank) on the welcome screen.
After entering your password, you'll be taken to the main menu. Here, you'll need to find the section responsible for communications. It might be called Communication, Connection or Network settingsThe selection is made using the navigation arrows and confirmed with the green key. Enter.
If the terminal is locked and requires a technician, try resetting the communication settings through the administrator menu, but be careful not to delete important encryption keys. In some cases, entering the "Remote Mode" is required. Technical Support using a master password.
⚠️ Attention: Don't change APN settings or GPRS parameters if you plan to use WiFi. Changing these settings may disrupt the backup connection.
Searching and selecting a wireless network
In the communication settings menu, select the option WiFi or Wireless LANThe terminal will begin scanning the surrounding area. A list of available networks will appear on the screen. Find the desired name (SSID) in the list and tap it to select it.
If your network doesn't appear in the list, it may be hidden. In this case, select the option Add New or Add a network at the bottom of the list. Enter the network name manually using the terminal's alphanumeric keyboard. Be careful with case.
After selecting a network, the system will prompt you to enter a security key. Enter your WiFi password. For easier entry of long passwords, you can use character display mode, if available in the interface. Verifone VX675.
Setting up IP address and DNS parameters
A critical step is configuring the IP protocol. By default, terminals are often configured to obtain an address automatically (DHCP). In home networks, this is usually sufficient. However, in offices and shopping centers, static addressing is often used for access control.
If your router distributes addresses automatically, make sure that in the WiFi settings, DHCP: Yes or Static IP: NoIf manual input is required, select Static IP and enter the information received from your system administrator. A single digit error will result in a connection failure.
It's also important to configure your DNS servers correctly. Often, your provider's automatic settings are slow or don't work correctly with your bank's servers. It's recommended to use public DNS, such as Google's (8.8.8.8) or Yandex (77.88.8.8), if permitted by security policies.
What should I do if the terminal does not receive an IP via DHCP?
If DHCP is enabled but the address isn't being assigned, try rebooting the router. Also, check to see if the address pool in the router settings is full. In rare cases, temporarily disabling MAC address filtering may help.
To enter data, use the table below as a sample for filling out the fields. The values must match your network infrastructure.
| Parameter | Description | Example of meaning |
|---|---|---|
| IP Address | Unique terminal address | 192.168.1.150 |
| Subnet Mask | Subnet mask | 255.255.255.0 |
| Gateway | Gateway (router) address | 192.168.1.1 |
| DNS Primary | Primary DNS server | 8.8.8.8 |
Saving the configuration and testing the connection
After entering all the parameters, you need to save the settings. Usually, a green button is used for this. Enter or menu item Save/OKThe terminal may restart the network module to apply the changes.
The connection test is performed automatically. A WiFi signal strength icon should appear on the screen (usually in the upper right or left corner). If the icon appears and shows a full or partial signal strength, a physical connection has been established.
Next, you need to perform a test transaction or send a report (Z-report) to verify data exchange with the bank's server. If the receipt is processed and printed (or saved in the electronic journal), the setup was successful.
- ✅ Wait for the WiFi icon to appear on the home screen.
- ✅ Make sure the time and date on the terminal are synchronized.
- ✅ Make a test payment with a minimum amount.
- ✅ Check for a receipt in your electronic journal.
☑️ Checking a successful connection
Diagnostics and troubleshooting
Even if you enter data correctly, problems can arise. A common mistake is Authentication FailedThis means the password is incorrect. Double-check your keyboard layout and capitalization. Also, make sure the encryption type on your router is compatible with the terminal (AES/TKIP).
If the terminal connects to WiFi, but writes No Host or Connection Timed Out, the problem may be with the gateway or DNS. Try changing the DNS to 8.8.8.8Also check if the router is blocking the device by MAC address.
If the connection is constantly interrupted, check the signal strength. Terminal VX675 The connection may be lost when moving out of a strong coverage area. In such cases, it may be necessary to install a repeater or move the router closer to the cashier's work area.
What to do if the terminal says "No Network"?
If the terminal shows no network connection even though the router is working, try manually setting the IP address, even if it's a home network. Sometimes the DHCP client on the terminal freezes. Also, check whether MAC address filtering is enabled on the router or whether the terminal's address has been blacklisted.
Is it possible to use a mobile hotspot from a phone?
Yes, Verifone VX675 It can work via a smartphone hotspot. However, make sure your phone isn't in data-saving mode, which can block the ports needed for acquiring. Also, keep an eye on your phone's battery.
How do I reset my network settings to factory defaults?
Resetting network settings usually requires entering the administrator menu (the password is often 0000 or 1234) and selecting "Restore Defaults" or "Network Reset." Be careful, as this may delete saved WiFi passwords.