Modern Novex TVs, powered by the Android TV operating system, provide users with access to a vast array of entertainment content, but they require internet access to function properly. Wireless connection This is the most convenient way to integrate a device into a home network, eliminating the need to run long cables across the room. However, the initial setup process can be challenging for those new to the Smart TV menu or those experiencing an interface update.
In this article, we'll detail the steps you need to take to set up a connection in just a few minutes, as well as address common errors that may arise during the process. Signal stability and the correctness of the entered data are key factors for success. If you've just purchased equipment or are switching from a cable connection to wireless, follow our recommendations for quick setup.
Before starting the procedure, make sure that your router is turned on, working properly, and distributing the network, and that the TV itself is in a strong signal reception area. Distance to the router plays an important role: if the device is located too far away or behind thick concrete walls, the connection speed may not be sufficient to watch high-definition videos.
Equipment preparation and compatibility testing
Before proceeding directly to the settings in the TV menu, you need to make sure that the infrastructure is ready. TVs Novex They are typically equipped with built-in Wi-Fi modules supporting the 802.11 b/g/n/ac standards, ensuring high data transfer rates. However, in rare cases, especially in budget or very old models, the built-in adapter may be missing or faulty.
Check your model's specifications in the manual or on the manufacturer's official website. If there's no built-in module, you'll need an external USB Wi-Fi adapter compatible with Android TV, although most modern devices Novex This is irrelevant. It's also important to know the encryption type of your home network, although in 99% of cases it's WPA2-PSK.
⚠️ Note: Some router models operate in dual bands (2.4 GHz and 5 GHz). Your TV may see these as two different networks or just one. Make sure you're connecting to a network that matches your TV's capabilities.
Make sure MAC address filtering isn't enabled on your router, as this could block new devices. If you're using a guest network, check if it has access to local resources, although this isn't usually required for internet access. Wi-Fi password It's better to prepare it in advance so you don't have to look for it in your provider's documents during setup.
Step-by-step instructions for connecting via the settings menu
The process for activating the wireless module in Novex TVs is standardized and is performed through the system's main menu. To begin, take the remote control and press the button. Home or the house icon to go to the main screen. Then, use the directional keys (arrows) to navigate to the upper right corner, where the gear icon represents the section. Settings.
In the menu that opens, select "Network & Internet" or simply "Network," depending on the version of Android TV you have installed. The system will prompt you to select a connection type: wired (Ethernet) or wireless (Wi-Fi). Turn the Wi-Fi toggle switch to "On" if it isn't already enabled, and wait for the list of available networks to appear.
- 📡 Find the name of your home network (SSID) in the list and click OK.
- 🔑 Enter your password using the on-screen keyboard, making sure the letter case is correct.
- ✅ Click “Connect” and wait until the “Connected” status appears.
After successful authorization, the TV will automatically obtain an IP address and DNS servers. You'll see a notification confirming a successful connection, and a signal strength icon will appear in the status bar. Now you can launch apps like YouTube or online movie theaters and check your internet connection.
☑️ Connection checklist
Setup via WPS for a quick connection
For users who don't want to enter a long password using the remote control, there's WPS (Wi-Fi Protected Setup) technology. This method allows you to connect your TV Novex To connect to your router with a simple press of a button. Your router should have a physical button labeled "WPS" or with a key/lock icon.
In the TV menu, go to network settings, select Wi-Fi, and find the "Connect via WPS" or "WPS Push Button" option. After selecting this option, you'll have about two minutes to press the corresponding button on the router. The system will automatically exchange encryption keys and establish the connection without your intervention.
Menu → Settings → Network → Wi-Fi → WPS (Push Button)This method is especially convenient if the remote control has faulty buttons or if the password contains complex special characters that are difficult to find on the on-screen keyboard. However, it's important to remember that WPS is considered a less secure protocol, so for regular use, it's best to set up a standard connection with a password.
What to do if the WPS button does not work?
If the router isn't responding, the WPS function may be disabled in its web interface. Access the router settings using a computer browser (usually 192.168.0.1 or 192.168.1.1), find the Wireless section, and make sure WPS Enabled is set to True. The button may also not work if it was pressed too long (resetting the router) or too short.
Manual configuration of IP and DNS addresses
In some situations, automatic settings acquisition (DHCP) may not work correctly, resulting in limited functionality or no internet connection when the device status is "Connected." In this case, you need to manual tuning network settings. To do this, select your network from the list of available networks, but instead of entering the password, look for "Advanced" or "Show advanced settings."
Change the IP settings from "Automatic" to "Manual." You'll need to enter the IP address, gateway (router), subnet mask, and DNS servers. The TV's address should be in the same subnet as the router, but not the same as other devices' addresses to avoid conflicts.
| Parameter | Example of meaning | Description |
|---|---|---|
| IP address | 192.168.1.150 | Unique TV address on the network |
| Gateway | 192.168.1.1 | Your router's address |
| Subnet mask | 255.255.255.0 | Determines the size of the network |
| DNS 1 | 8.8.8.8 | Google Server (Primary) |
| DNS 2 | 1.1.1.1 | Cloudflare Server (Alternative) |
Using public DNS servers, such as Google (8.8.8.8) or Cloudflare (1.1.1.1), can often help speed up Smart TV interface response and resolve content loading issues from certain regions. After entering all the information, save the settings and test the connection.
Troubleshooting connection issues and errors
Even with the correct settings, problems can still occur. One of the most common issues is when the TV detects the network, but displays "Authentication Error" or endlessly tries to connect. First of all, reboot the router, unplugging it from power for 10-15 seconds. This will clear the cache and resolve any module freezes.
If the problem persists, try "Forget Network" in your TV settings. To do this, select your network from the list of saved networks, press the menu or delete button, and confirm. Then try connecting again, carefully entering the password. A common mistake is confusing the case of letters or the language layout.
- 🔄 Update your TV software via the menu "About TV" → "System update".
- 📶 Check the signal strength: if it is weak (1-2 bars), try moving the router closer or using a Wi-Fi repeater.
- 🛡️ Temporarily disable MAC filtering on your router for diagnostics.
In rare cases, the cause may be incompatibility of encryption standards. If the router is configured only for WPA3, and the TV Novex If your router is an older model, it may not connect. Try changing your router's security settings to mixed WPA2/WPA3 mode or WPA2 only.
⚠️ Note: The Android TV interface may vary slightly depending on the operating system version and specific TV model. If you don't see the item you're looking for, search for a similar one or refer to the online manual for your model.
Optimizing Wi-Fi signal for Smart TV
For comfortable viewing of 4K or Full HD video without buffering, it's not just the connection itself that's important, but its quality. Novex TVs often have antennas built into the housing, which can reduce reception compared to external adapters. Placing the router at the same height as the TV and within direct line of sight will significantly improve the situation.
If your router is dual-band, try connecting your TV to the 5 GHz network. This band is less congested with neighboring networks and offers higher speeds, although it has a shorter range and is less effective at penetrating walls. This is critical for streaming services.
Avoid placing the router near microwave ovens, baby monitors, or other strong sources of interference, as they operate in the 2.4 GHz frequency range and can interfere with the signal. Metal objects and mirrors between the router and TV can also block the signal.
How to check internet speed on TV?
To check your actual download and upload speeds, you can install the "Speed Test" app from the Google Play Store on your TV. Run the test and compare the results with your provider's plan. For 4K video, a minimum speed of 25 Mbps is recommended.
Is it possible to share Wi-Fi from a phone to a TV?
Yes, this is possible using the "Tethering" feature on your smartphone. However, watching videos drains your mobile data quickly, so only use this method for short-term connections or updating apps.
What to do if the TV does not see any networks?
If the network list is empty, the Wi-Fi module may be faulty or the drivers may be corrupted. Try a full factory reset of the TV. If this doesn't help, you'll need diagnostics at a service center.
Do I need a LAN cable if I have Wi-Fi?
A cable connection is always more stable and faster than a wireless one. If you have the option to run a cable, use it for the best picture quality, especially for heavy 4K content.
Why did Wi-Fi disappear after updating the firmware?
Sometimes new software versions contain bugs. Try resetting your network settings or performing a system rollback. As a last resort, contact the manufacturer's support team.