Connecting Wi-Fi to an Erisson TV: 3 Proven Methods + Troubleshooting

Televisions Erisson — a popular choice for home theaters thanks to its combination of affordability and modern features. However, many users encounter difficulties when first connecting to Wi-Fi: the network can't be found, the password isn't accepted, or the connection keeps dropping. This article will help you understand all the nuances of setting up wireless internet on Erisson — from basic steps to solving rare errors.

We'll look at three main connection methods (via the TV menu, WPS, and adapter), address typical authorization and signal issues, and provide recommendations for optimizing your connection for streaming. 4KWe will pay special attention to the models Erisson 43U6100, 50U7200 And 55Q8000, where the connection algorithm may differ. If your TV was released before 2020, some menu items may have different names—this is normal.

Before you begin, make sure your router is working properly (check on your phone or laptop) and your TV is updated to the latest firmware version. On Erisson 2023–2026 models with Android TV 11+, the "Quick Connect" feature is available via QR code—we'll cover this method in a separate section.

1. Preparing the TV and router for connection

Before you search for Wi-Fi networks on your TV, there are a few essential steps you need to take:

• 🔌 Check the power supply: Make sure the router is plugged in and the lights are steady (not flashing). On some models Erisson When the power signal level is low, the Wi-Fi module may turn off.
• 📶 Location of devices: The TV and router should be no more than 10 meters apart (without thick walls). For models with support Wi-Fi 6 (For example, Erisson 65Q9000) this distance can be increased to 15 meters.
• 🔒 Network password: Check your current Wi-Fi password—it may differ from the one on the router sticker (if you've changed it). On some firmware versions Erisson When entering a password, case is important!
• 🔄 RebootRestart both your TV and router (unplug them for 30 seconds). This will clear temporary connection errors.

If your router supports two frequencies - 2.4 GHz And 5 GHz — for the first connection, select 2.4 GHzThis network has a longer range and penetrates obstacles better. 5 GHz connect later if you need high speed for 4K-content.

⚠️ Attention: On routers with the “Hidden Network” (Hidden SSID) function enabled, the TV Erisson It won't be able to find Wi-Fi automatically. You'll have to enter the network name (SSID) manually in the "Other Networks" menu.

2. Method 1: Connecting via the TV menu (step by step)

This is the most universal method that works on all models. Erisson, including old series with OS Linux and new ones with Android TV. Follow the instructions:

1. Turn on the TV and press the button Home (or Menu) on the remote control. In the main menu, select Settings (gear icon).

2. Go to the section Net → Network setup → Wireless network (Wi-Fi)On some models the path may look like this Network and Internet → Wi-Fi.

3. The TV will begin scanning for available networks. Select your network from the list. If it's not there, press Refresh the list or Other networks for manual input.

4. Enter your password using the on-screen keyboard. For convenience, use the buttons ↑↓←→ on the remote control to navigate through the symbols. Press OK or Connect.

5. Wait for the "Connected" or "Internet Available" message. If an error appears, check your password or reboot the router.

On models with Android TV 10+ (For example, Erisson 55U8500) after connection, the system may offer to update the firmware. Don't refuse This will fix potential Wi-Fi issues. The update will take 5-15 minutes.

The Wi-Fi password has been verified|The router is turned on and distributing the network|The TV has been updated to the latest firmware|The distance between devices is no more than 10 meters-->

⚠️ Important: If the TV displays "Unable to obtain an IP address" after entering the password, check your router's DHCP settings. This feature should be enabled (usually it is enabled by default).

3. Method 2: Quick connection via WPS

Function WPS (Wi-Fi Protected Setup) allows you to connect your TV to your router without entering a password—just press a button on the router. This method works if:

• 🔘 Your router supports WPS (usually there is a button with this name or a lock icon).
• 📺 TV Erisson Released after 2019 (WPS may not be available on older models).
• 🔄 The WPS function is enabled in the router settings (check in the web interface at 192.168.0.1 or 192.168.1.1).

Instructions for connecting via WPS:

1. On the TV, go to Settings → Network → Wi-Fi → WPS (or Fast connection).
2. Select an option Press the button on the router.
3. Within 2 minutes, press the physical WPS button on the router (usually located on the back panel).
4. Wait for the “Connected” message to appear on your TV screen.

If the connection fails, try again or check if the WPS function is disabled in the router settings. On some models Erisson (For example, 43U6500) After a successful WPS connection, you will have to manually confirm Internet access in the network menu.

What to do if the WPS button does not work?

If the physical WPS button on your router doesn't respond, try:

1. Log into the router's web interface (usually at 192.168.0.1) and enable WPS in the "Wireless Network" section.

2. Update your router firmware – sometimes bugs interfere with WPS functionality.

3. Use a PIN code instead of a button (if the TV supports this WPS option).

4. Method 3: Connecting via an external Wi-Fi adapter

If the TV has a built-in Wi-Fi module Erisson works unstably or is absent (as in some budget models before 2020), you can use external USB adapterThis method is also relevant if you need to connect to the network 5 GHz, which is not supported by the built-in module.

You will need:

• 🔌 USB Wi-Fi adapter with standards support 802.11ac or 802.11n (recommended) TP-Link TL-WN823N or ASUS USB-AC53 Nano).
• 📺 USB port on the TV (usually located on the side or back). On some models Erisson A USB hub with external power may be required.
• ⚡ NutritionThe adapter must be receiving sufficient power. If the TV displays "Device not recognized," try connecting the adapter through a power strip with an external power supply.

Step-by-step instructions:

1. Connect the adapter to the USB port of the TV.
2. Go to Settings → Network → Network setup → Wireless network.
3. Select your network from the list (if the adapter is detected, an additional item “USB Wi-Fi” will appear).
4. Enter the password and wait for the connection.

⚠️ Please note: Not all USB adapters are compatible with TVs. ErissonBefore purchasing, check the user manual or the manufacturer's website for a list of supported devices. Chip-based adapters Realtek RTL8188 often cause problems with drivers.

5. Solving common Wi-Fi problems on Erisson

Even after a successful connection, users still encounter errors. Let's look at typical cases and how to resolve them:

🔴 Problem: The TV can't find a Wi-Fi network

• 🔍 Check if Wi-Fi is enabled on your TV: go to Settings → Network and make sure the wireless network is activated.
• 📡 Switch the router to a different channel 1–11 (in the wireless network settings). Some models Erisson can't see channels above 11.
• 🔄 Change the router's operating mode to 802.11n (instead of 802.11ac or ax) - this may help older TV models.

🔴 Problem: The connection keeps dropping

• 📶 Check your signal strength: if it's below 50%, move your router closer or use a repeater.
• 🔌 Turn off Wi-Fi energy saving in your TV settings (Settings → Power Saving → Wi-Fi Mode).
• 🔄 Update your router firmware—old versions often conflict with modern TVs.

🔴 Problem: Incorrect password (even though it is correct)

• 🔑 Make sure you enter your password in the correct case (upper/lower case letters matter!).
• 📝 Try entering your password through the app Erisson Remote on a smartphone - it's more convenient than the on-screen keyboard.
• 🔄 Reset network settings on your TV: Settings → Network → Reset network settings.

6. Optimize Wi-Fi for streaming and gaming

If you are planning to watch movies in 4K, play cloud games (GeForce NOW, Xbox Cloud Gaming) or use YouTube Without freezing, a standard connection may not be enough. Here's how to improve your connection:

• 📶 Switch to 5 GHzThis frequency provides higher speed but shorter range. It's suitable if the router is located near the TV.
• 🔌 Use an Ethernet adapter: For maximum stability, connect your TV to your router via USB-LAN adapter (For example, TP-Link UE300). This is relevant for models Erisson with port USB 3.0.
• 📡 Configure QoS on your router: Prioritize your TV's traffic in the Quality of Service settings (usually in the Advanced or Internet section).
• 🔄 Disable background updates: In the settings Android TV Disable automatic app updates (Settings → Applications → Auto-update).

To check the connection speed on your TV Erisson you can use the app Speedtest by Ookla (available in Google Play for models with Android TV). Optimal values ​​for 4K-streaming:

• 📥 Download: not less than 25 Mbit/s.
• 📤 Recoil: not important for browsing, but for cloud gaming you need 10+ Mbps.
• 🕒 Ping: less than 50 ms (for games - less than 30 ms).

7. Connecting to a hidden Wi-Fi network

If your router is configured for a hidden network (Hide SSID function), the TV Erisson won't be able to find it automatically. In this case:

1. Go to Settings → Network → Wi-Fi → Other networks (or "Add network manually").
2. Enter the network name (SSID) exactly the same as on the router (case sensitive!).
3. Select the security type (WPA2-PSK or WPA3-PSK - look in the router settings).
4. Enter your password and save your settings.

If the TV still does not connect:

• 🔄 Restart your router and TV.
• 🔑 Make sure that hidden devices are allowed in your router settings (the "Allow connection to hidden network" option).
• 📡 Temporarily disable hiding SSID, connect your TV, and then turn this feature on again.

⚠️ Warning: Hiding your SSID does not improve network security—this is a myth. For reliable protection, use WPA3 and a complex password (at least 12 characters with numbers and special characters).

8. Frequently Asked Questions (FAQ)

🔹 Why won't my Erisson TV connect to Wi-Fi after a factory reset?

After reset (Settings → Support → Reset) All network data is deleted. You'll need to re-enter your Wi-Fi password. If the problem persists:

• Check if the password on your router has changed.
• Update your TV firmware via USB (instructions in the user manual).
• Try connecting via WPS or an external adapter.

🔹 Is it possible to connect Erisson to Wi-Fi without a remote control?

Yes, there are several ways:

• Use remote control from another TV (universal) with support Erisson.
• Install the application Erisson Remote to a smartphone (available for Android And iOS).
• Connect keyboard or mouse via USB/Bluetooth and control the menu using them.
• On some models, you can turn on the TV with a button on the body and use voice search (if there is a microphone).

If you lost your remote control, order the original one on the website. Erisson or a universal one with infrared port support.

🔹 How do I find out what firmware version is installed on my Erisson TV?

Path to firmware information:

1. Click Home → Settings (gear).
2. Go to Support (or About TV).
3. Select Software Information or Firmware version.

Current version for 2026:

• Erisson 2023–2026: Android TV 11/12, firmware version Vxx.xx.100.XXX or higher.
• Erisson 2018–2022: Android TV 9/10, version Vxx.xx.50.XXX.
• Erisson before 2018: Firmware based on Linux, the version is indicated as SW: x.xx.xx.

🔹 Why is Wi-Fi working, but YouTube and Netflix are slow?

The reasons may be different:

• 📶 Weak signal: Check the level in Settings → Network → Network StatusIf there are less than 3 bars, move the router closer or use a repeater.
• 🔄 Router overload: Disconnect unnecessary devices from the network or reboot the router.
• 📥 Low speed from the provider: Run a speed test on your TV (app Speedtest). For 4K at least 25 Mbps required.
• 🔧 Quality settings in applications: IN YouTube or Netflix manually select resolution 1080p instead of Auto.

If the problem is only with a specific application, clear its cache: Settings → Apps → [name] → Clear cache.

🔹 Can Erisson connect to public Wi-Fi (in a hotel, cafe)?

Yes, but there are some nuances:

• 🔑 Most social networks require authorization through a browser. Erisson open the built-in browser and enter the address (usually 1.1.1.1 or captive.apple.com).
• 📱 If the browser on your TV doesn't open the login page, log in from your phone/laptop and then connect the TV to the same network (some networks bind devices by MAC address).
• ⚠️ Public networks often block streaming services. Use VPN (For example, NordVPN For Android TV).