Connecting a Xiaomi humidifier to an iPhone via Wi-Fi: instructions for entering a password and setting it up

Smart humidifiers from Xiaomi have become a popular solution for maintaining a comfortable indoor climate. However, many users iPhone encounter difficulties when connecting the device to a home Wi-Fi network for the first time, especially when entering the password. Unlike Android, where the process is often automatic, owners iOS additional steps have to be taken due to operating system limitations.

In this article we will look at step-by-step instructions on connecting humidifiers Xiaomi Mi Smart Humidifier (including models 2, Pro, CA1, JSQ and others) to iPhone via Wi-Fi. We'll pay special attention to password entry issues, "Unable to connect to the network" errors, and application usage nuances. Mi HomeIf your humidifier refuses to connect despite the correct password, you'll find solutions here.

1. Preparing for connection: what to check before starting

Before you begin setting up, make sure you have completed the following basic conditions for a successful connection. Neglecting these steps leads to errors when entering the Wi-Fi password in 80% of cases.

  • 📱 iOS version: Humidifier Xiaomi requires iOS 10.0 or newer. On older versions (for example, iOS 9) application Mi Home may not support network data transmission function.
  • 📶 Wi-Fi network type: The device only works with networks 2.4 GHzIf your router broadcasts two networks (for example, MyWiFi_2G And MyWiFi_5G), connect to the first one.
  • 🔒 Wi-Fi password: Make sure the password does not contain Cyrillic characters, spaces or special characters (For example, #, $, %). If so, temporarily change it in your router settings.
  • 🔋 Charging the humidifier: The unit must be plugged in and have enough water in the tank. Some models (JSQ, CA1) block Wi-Fi settings when the fluid level is low.

Also check what's on your iPhone Bluetooth is on — it is used for the initial transmission of network data. If Bluetooth is disabled, the application Mi Home will not be able to “see” the humidifier during the pairing stage.

2. Installing and configuring the Mi Home app

Application Mi Home (renamed to Xiaomi Home (In some regions) is a mandatory tool for controlling the humidifier. Download it from App Store, but please note: for correct operation you will need to create or log in to Xiaomi account.

After installation:

  1. Open the app and select your region. Russia (or your country). Do not change your region after creating an account. - This may result in loss of access to devices.
  2. Register or log in using your existing account (email/phone number). If you already have an account Mi For another device (eg smartphone), use it.
  3. In the main menu, click + → Add device and select a category Humidifier.

If your model is not listed, try selecting Other device and enter the name manually (for example, Mi Smart Humidifier 2). In some versions of the app, humidifiers are hidden under the category Smart Home.

📊 Which Xiaomi humidifier do you have?
Mi Smart Humidifier 2
Mi Smart Humidifier Pro
Mi Smart Antibacterial Humidifier (JSQ)
Another

3. Step-by-step instructions: connecting the humidifier to Wi-Fi

Now let's move on to the most important step: connecting the device to your network. Follow the instructions carefully, as error at any step will cause the process to reset.

  1. Activate pairing mode on the humidifier:
    • For models Mi Smart Humidifier 2/Pro: hold down the power button 3-5 secondsuntil the indicator starts flashing orange.
    • For JSQ/CA1: press and hold the button Wi-Fi (usually located on the rear panel) until a beep sounds.
  2. In the Mi Home app Select your humidifier model from the list. If the device is not displayed, check that Bluetooth is on. iPhone included.
  3. Connect to a temporary network:
    • The application will offer to connect to a network type Xiaomi_XXXX. Click Connect.
    • If the request does not appear, go to iPhone Settings → Wi-Fi and select the network Xiaomi_... manually.
  • Enter your Wi-Fi network password:
    • Please check your password carefully! The password is case-sensitive.
    • If your password contains special characters, try temporarily changing it to a simple one (for example, 12345678) for the test.
    • Wait for the setup to completeThe humidifier will reboot and the indicator will change color to blue (success) or red (error).

    Make sure your iPhone is connected to a 2.4 GHz network|

    Check that your Wi-Fi password does not contain Cyrillic characters|

    Turn on Bluetooth on iPhone|

    Hold down the Wi-Fi button on the humidifier until the indicator light flashes|

    Connect to the temporary Xiaomi_XXXX network manually if the automatic request does not appear

    -->

    If an error appears at the password entry stage "Unable to connect to the network", try the following steps:

    • 🔄 Reboot your router and try again.
    • 📵 Disable VPN or proxy on iPhone - They can block data transmission.
    • 🔌 Bring the humidifier closer to the router (at a distance 1–2 meters).
    What should I do if the humidifier does not flash orange?

    If the indicator does not respond when you hold the button, try:

    1. Disconnect the device from the power supply for 10 seconds, then turn it on again.

    2. For models with a removable tank, remove it and install it back (sometimes a reset is triggered).

    3. If nothing helps, perform a hard reset: hold down the power button for 10-15 seconds until you hear a beep (this does not work on all models).

    4. Common mistakes and their solutions

    Even if you enter the password correctly, the connection may fail. Below - top 5 mistakes and ways to resolve them, based on user feedback.

    Error Possible cause Solution
    Failed to connect to the network Incorrect password or 5 GHz network Check your password, switch to 2.4 GHz
    The device is not responding The humidifier is too far from the router. Bring the device closer to the router
    Authentication error The password is too complex (Cyrillic, symbols) Change the password to Latin without special characters
    Failed to add device Outdated version of the Mi Home app Update the app in the App Store
    The indicator is flashing red No connection to Xiaomi servers Check your iPhone's internet connection and disable your VPN.

    If none of the methods helped, try alternative connection method through Android- device (if possible, borrow it). Some users note that Android The process is faster due to fewer OS restrictions.

    5. Setting up the humidifier after connection

    After successfully connecting to Wi-Fi, the humidifier will appear in the main menu of the application. Mi HomeNow you can configure the basic parameters:

    • 💧 Target humidity: Recommended range - 40–60%For children's rooms, you can install 50–55%.
    • ⏱️ Timer: Set up automatic on/off on a schedule (for example, at night).
    • 🌡️ Opening hours:
      • Auto — the humidifier maintains a set humidity level.
      • Manual — operation at fixed power (1–3 levels).
      • Dream — silent mode with minimum indicator brightness.
    • 🔄 Steam direction: In some models (Pro, JSQ) you can adjust the spray angle.

    For models with antibacterial filter (JSQ) an option will appear in the settings Cleaning the filter. Follow the app notifications about the need to replace the cartridge (usually once a 2-3 months).

    1. Internet connection status on iPhone.

    2. Availability of firmware update notifications in Mi Home.

    3. The distance between the humidifier and the router (maximum 10 meters without obstacles).-->

    6. Control the humidifier via voice assistants

    Connected to Mi Home The humidifier can be integrated with voice assistants — Siri (through Shortcuts), Alice (Yandex) or Google AssistantTo do this:

    1. In the appendix Mi Home Go to your device settings and select Smart Home → Add to Voice Assistant.
    2. For Alice's:
      • Open the app Yandex with a linked account.
      • Go to Devices → Add device → Xiaomi.
      • Log in using your account Mi and select a humidifier from the list.
  • For Siri:
    • Install the application Shortcuts (if not installed).
    • Create a new script with the command Set humidity to X%.

    Once set up, you will be able to control the humidifier with your voice, for example:

    • "Alice, turn the humidifier on to 50%."
    • "Hey Siri, set the humidity in your bedroom to 60."
    Voice control limitations

    Voice assistants only support basic commands (turning on/off, setting humidity). For advanced features (such as setting a schedule), you'll need to use Mi Home.

    7. Updating the firmware and solving connection problems

    If the humidifier is connected but works erratically (for example, it periodically disconnects from Wi-Fi), the reason may be outdated firmwareTo update it:

    1. Open Mi Home and choose your humidifier.
    2. Go to Settings → About device → Firmware update.
    3. If a new version is available, click Refresh and wait until it is finished (do not unplug the humidifier!).

    If the update freezes or returns an error:

    • 🔌 Check the stability of the power supply (plug the humidifier directly into the outlet, without extension cords).
    • 📶 Make sure your internet speed is not lower 2 Mbps.
    • 🔄 Reboot your router and try again.

    If connection problems occur regularly, try fix an IP address humidifier in the router settings. To do this:

    1. Find out the MAC address of the device (displayed in Mi Home (in the humidifier information).
    2. In the router control panel, find the section DHCP → Address Reservation.
    3. Add a new rule by binding the humidifier's MAC address to a fixed IP.

    8. Safety: How to protect your humidifier from burglary

    Smart devices XiaomiWi-Fi-connected devices are theoretically vulnerable to hacker attacks. To minimize the risks:

    • 🔐 Use a strong Wi-Fi password (not less than 12 characters, with an alphanumeric combination).
    • 🌐 Disable remote access, if you don't plan to operate the humidifier outside the home. To do this, Mi Home go to Profile → Settings → Remote Access.
    • 🔄 Update your firmware regularly — new versions often patch vulnerabilities.
    • 📵 Create a separate network for smart devices (guest network) in the router settings.

    If you suspect your device has been compromised (for example, it turns on by itself), reset it to factory settings and reconnect with the new Wi-Fi password.

    FAQ: Frequently asked questions about connecting a Xiaomi humidifier to an iPhone

    ❓ Why doesn't the humidifier find my Wi-Fi network, even though it exists?

    Your router is most likely hiding your SSID (network name). Enable network visibility in your router settings or enter the name and password manually. Mi Home.

    ❓ Is it possible to connect a humidifier to an iPhone without the Mi Home app?

    No, there are no official other methods. However, some users use alternative apps like Home Assistant (requires technical skills).

    ❓ The humidifier is connected, but Mi Home shows it's offline. What should I do?

    Check:

    • Is the internet working on iPhone.
    • Has the Wi-Fi password changed?
    • Is your router's firewall blocking the connection to Xiaomi servers? (Try temporarily disabling it.)

    If nothing helps, reset the device and reconnect it.

    ❓ How do I transfer a humidifier to another Xiaomi account?

    In the appendix Mi Home go to device settings, select General access and add a new account. After that, you can remove the device from the old account.

    ❓ Why did the humidifier stop working after updating the firmware?

    There was probably an error updating. Try:

    1. Disconnect the device from the power supply for 1 minute, then turn it on again.
    2. Perform a factory reset (hold the power button for 10-15 seconds).
    3. If this doesn't help, please contact Xiaomi support, specifying your model and firmware version.

    • 📖 Read also

    How to connect the Mi Smart humidifier to Wi-Fi: full instructions Step-by-step instructions on how to set up the Xiaomi Mi Smart humidifier via the Mi Home app. Solution Why does Samsung Watch need Wi-Fi? Features and settings A detailed look at the Wi-Fi features on the Samsung Galaxy Watch. Learn how to make calls without a phone. How to connect Yandex Alice to a new Wi-Fi network: full instructions A detailed guide on reconfiguring Yandex Station to a new router. Resetting, pairing mode, and troubleshooting How to connect Alice to a new Wi-Fi network: complete instructions Step-by-step guide: how to link Yandex Station to a new router. Troubleshooting connection issues Connecting a WiFi camera to your phone via iCSee Step-by-step instructions: how to connect a WiFi camera to your phone using the iCSee app. Troubleshooting How to connect a WiFi IP camera to your phone: step-by-step instructions A detailed guide on setting up an IP camera via WiFi from an Android/iOS phone. Selecting apps,