Connecting an LG TV to Wi-Fi without a remote: all the methods (2026)

Lost or broken the remote control LG Smart TV, but need to connect to Wi-Fi urgently? The situation is familiar to many: without the internet, they can't work. YouTube, Netflix, and sometimes even basic TV functions. Fortunately, there are at least 5 Proven Ways to Connect an LG TV to Wi-Fi Without a Remote — from standard solutions to little-known life hacks using a smartphone or keys on the case.

In this article you will find:

• 🔧 Step-by-step instructions for models on WebOS (2014–2026) and old TV with NetCast.
• 📱 Control methods via smartphone (including iPhone And Android).
• ⚠️ Safety checklistto avoid blocking your TV when resetting settings.
• 🔄 Alternative methods (HDMI-CEC, USB keyboard, service menu).

Important: If your LG TV If your phone was released before 2012, some methods may not work—there's a separate section for older models at the end of the article. Also, keep in mind that the interface WebOS is being updated and the layout of menu items may differ slightly.

1. Connection via buttons on the TV body

The most reliable way is to use the physical buttons on the back or bottom panel. LG TVThey are even on the newest models, for example, LG OLED C3 or QNED 90. Usually it is:

• 🔘 Power button (on/off).
• 🔄 Joystick button (or "OK") - for navigation.
• 📺 Volume/channel buttons (sometimes they duplicate the functions of the joystick).

Algorithm of actions:

1. Turn on the TV using the power button.
2. Find the joystick (usually under the logo) LG) and click it once — the menu will open.
3. Use the joystick to navigate:
   • 🔽 Down/Up — select an item.
   • 🔘 Click to confirm.
   • 🔙 Hold - return back.

⚠️ Attention: On some models (eg, LG UK6300) The joystick only works when held for 3-5 seconds. If the menu doesn't open, try pressing and holding the button.

2. Control your TV via smartphone (LG TV Plus)

If the buttons on the case are missing or broken, you can use the official application LG TV Plus (available for Android And iOS). It replaces the remote control and allows you to connect to Wi-Fi via the TV interface.

Instructions:

1. Download the app LG TV Plus from App Store or Google Play.
2. Connect your smartphone to the same Wi-Fi network you want to connect your TV to (or use your mobile data for initial setup).
3. Launch the application and select Add a device → Connect via Wi-Fi Direct.
4. A connection request will appear on the TV - confirm it using the buttons on the TV (or the joystick).
5. Once paired, a virtual remote control will open in the app. Go to Settings → Network and set up Wi-Fi.

💡 Helpful tip: If the TV does not find the network Wi-Fi Direct, try rebooting it (pull the plug from the socket for 30 seconds). Also, make sure that the power is turned on on the smartphone. Bluetooth - it is needed for initial pairing.

What should I do if the app doesn't detect the TV?

1. Check if your model supports LG TV Plus (a list of compatible devices is available on the LG website).

2. Make sure that the TV and smartphone are on the same network (if you are using a router).

3. Update your TV firmware via USB (instructions in section 5).

4. Try an alternative app - Unified Remote or TeamViewer QuickSupport (for some models).

3. Using HDMI-CEC (control via another remote control)

Technology HDMI-CEC allows you to control your TV using the remote control from another device connected via HDMI (For example, Blu-ray player, Android TV set-top boxes or PlayStation). This works if:

• 📺 TV and device support HDMI-CEC (on LG this is a function Simplink).
• 🔌 Both devices are connected to the same outlet (or the TV is turned on).
• 🔗 Function Simplink activated in TV settings.

How to connect:

1. Connect the device (eg. Xiaomi Mi Box) to the TV through HDMI.
2. Turn on the TV using the button on the body.
3. On the remote control of the device (for example, from a set-top box) press Menu or Home.
4. If Simplink enabled, you will be able to control the TV menu using the set-top box remote control.
5. Go to Settings → Network → Wi-Fi and set up the connection.

⚠️ Attention: On some models LG (For example, 43LK5700) function Simplink It's disabled by default. To activate it without the remote control, you'll need to use the buttons on the housing (Section 1) or reset the settings (Section 5).

4. Connecting a USB keyboard or mouse

Few people know, but LG Smart TV (starting from WebOS 2.0) supports connection USB keyboards And miceThis makes it easier to enter your Wi-Fi password and navigate menus.

How does this work:

1. Connect your keyboard or mouse to USB port TV (usually located on the side or back).
2. Turn on the TV using the button on the body.
3. The mouse cursor or keyboard arrow keys will now replace the remote control.
4. Go to Settings → Network → Wi-Fi.
5. Select the network and enter the password using the keyboard (much more convenient than using a joystick!).

🔹 Which devices are suitable:

• 🖱️ Any wired/wireless mouse (Logitech, A4Tech).
• ⌨️ Keyboard with USB receiver or Bluetooth (For example, Microsoft All-in-One).
• 🎮 Gamepad with support USB HID (For example, DualShock 4).

⚠️ Attention: On models older than 2016 (WebOS 1.0–2.0) may not work Bluetooth keyboard — wired only. Also, some TVs require pre-activation of the function. USB HID Support in the service menu.

5. Reset your TV to factory settings

If none of the methods work, there is only one last resort - full reset (Factory Reset). This will delete all settings, including saved Wi-Fi networks, but will allow you to set up a connection from scratch.

How to reset settings without a remote:

1. Turn on the TV using the button on the body.
2. Find the joystick and hold it 10-15 secondsuntil the reset menu appears.
3. On some models (LG OLED B9, NanoCell 85) you need to clamp power button for 20 seconds.
4. In the menu that opens, select OK → Reset → Confirm (use joystick).
5. After rebooting, the TV will prompt you to set up the network again.

⚠️ Attention: Reset will remove:

• 📁 All installed applications (Netflix, Prime Video and others).
• 🔐 Saved Wi-Fi and account passwords (LG Account, Google).
• ⚙️ Individual image and sound settings.

🔹 How to avoid data loss:

• 📱 Take a photo of your current settings (brightness, contrast, channel list) in advance.
• 🔄 If the TV is connected to LG Account, applications will be restored automatically after signing in.
• 💾 Save the list of installed channels (if you use DVB-T2).

6. Alternative methods (for older LG models)

If your TV was manufactured before 2014 (NetCast (or older platforms), standard methods may not work. Here's what you can try:

Method 1: Connecting via WPS (if the router supports it)

Method 2: Using Ethernet cable (temporary solution)

1. Turn off the TV using the button on the body.
2. Press and hold the button on the remote control (if available) or joystick Menu.
3. While holding it, turn on the TV using the power button.
4. After 5 seconds the service menu will appear (do not change the parameters if you are not sure!).