Modern smart TVs from the company Xiaomi They are powerful multimedia centers that are unimaginable without access to the global network. An internet connection provides access to streaming services, online cinemas, apps, and the ability to stream content from a smartphone. However, initial setup often raises questions for users new to the ecosystem. Mi Home.
Integrating a device into your home network usually doesn't take long if you know where to look for the necessary menu items. In this article, we'll detail the steps that apply to both Android TV models and TVs based on the Android operating system. PatchWall or Google TVYou'll learn how to choose the right router frequency, avoid common password errors, and what to do if the network icon is red.
Preparing the equipment and checking the router
Before you begin configuring your TV's software, you need to ensure the physical hardware is working properly. The router should be turned on, and the WAN and WLAN indicators should be lit or blinking, indicating a signal. If you're using a dual-band router, make sure the 5 GHz network is enabled, as it provides a more stable high-definition video stream.
It's important to know your network's exact name (SSID) and password. Problems often arise because users mix up their letters or forget about the remote's case-sensitivity. It's also worth checking that MAC address filtering isn't enabled on your router, which could block new devices.
- 📶 Make sure the router is within line of sight or no more than 10 meters through one wall.
- 🔌 Check that the ISP cable is securely inserted into the WAN port of the router.
- 📱 Write down your Wi-Fi password in advance so you don't have to search for it when entering it on your TV screen.
- 🔄 Restart your router if it has been running continuously for more than a month.
⚠️ Note: Some older router models may not support the encryption protocols used by the new Xiaomi TV. If your device is unable to detect the network, try temporarily changing the security type in your router settings to WPA2-PSK (AES).
The distance between the receiver and transmitter is critical. If the TV is installed in a drywall recess or behind a glass cabinet door, the signal strength may drop to unacceptable levels. In such cases, even a powerful router won't save the situation, and you'll have to find alternative cable routes or install a repeater.
Find the network settings section in the interface
TV interface Xiaomi The menu may vary depending on the region and firmware version, but the logic remains the same. You need to find the item responsible for connections. The remote control usually has a gear button or a separate quick access button for settings. Pressing it will take you to the system menu.
In the classic Android TV shell, you need to go down to the very bottom of the list and select Settings. Next, you should go to the section Network and Internet or simply NetIn newer versions Google TV This option may be located in the upper right corner of the screen, next to the user profile. Just be careful not to confuse app settings with system settings.
Differences in the menus of different MIUI TV versions
In older versions of the PatchWall firmware, network settings could be hidden in the "General" submenu. In the latest Android TV builds 10 and higher, the path is standardized: Settings -> Network & Internet -> Wi-Fi. If you don't see the desired option, check whether "Guest" or "Kids" mode is enabled, which restricts access to system functions.
After entering the network connections section, the system will automatically scan for available access points. This process can take 5 to 15 seconds. If the list of networks is empty, even though Wi-Fi is working on other devices, the TV's wireless module driver may be frozen. In this case, a full power reset can help: turn off the TV with the remote, then unplug it from the wall outlet for 30 seconds.
Step-by-step process of connecting to a wireless network
Once you see the list of available networks, find the name of your router. Note the lock icon next to the name: this means the network is password-protected. Select the desired line with the remote control and press the confirmation button (usually the center button). OK or Enter). A virtual keyboard will appear on the screen.
Entering your password is the most crucial step. Use the navigation arrows to move between characters. Be careful: numbers and letters are often located on separate lines. If your password is complex, the system may prompt you to reveal its characters, hiding the asterisks. Use this feature to check.
☑️ Connection algorithm
After entering the data, click the button Connect or JoinThe TV will send a request to the router and begin the authorization process. A loading indicator may appear on the screen at this point. If the credentials are correct, the Wi-Fi icon in the upper corner of the screen will change to indicate the signal strength, and the system will prompt you to check for updates.
- 🔑 Enter your password carefully, checking every letter, as you can only correct an error by starting over.
- 📶 Choose a 5GHz network when viewing 4K content to avoid buffering.
- 📺 After successfully connecting, check YouTube or your online cinema.
Using a wired connection and LAN port
Not all users know that TVs Xiaomi You can connect to the internet not only over the air but also via cable. This is especially important for models that don't support the 5 GHz standard, or in cases where the Wi-Fi signal at the TV's location is too weak. To do this, you'll need a standard Ethernet cable (twisted pair) of Category 5 or higher.
One end of the cable is inserted into a free LAN port on your router, and the other into the connector LAN on the back or side panel of the TV. The system usually automatically detects a wired connection and prioritizes it over a wireless one. In the network settings, the status will change to "Connected via Ethernet."
The advantage of this method is stability. The cable is not susceptible to interference from microwave ovens, Bluetooth headphones, or neighboring routers. The port's throughput is typically 100 Mbps or 1 Gbps, which is more than sufficient for any video stream.
However, there are some caveats. A wired connection ties the TV to a specific location, which isn't always convenient for installation. Furthermore, if the router is located far away, you'll have to run a long cable through the entire apartment, which could disrupt the decor. In such cases, it's better to consider using Powerline adapters, which transmit internet through the electrical wiring.
Comparison of 2.4 GHz and 5 GHz frequencies for Smart TV
Choosing a frequency band isn't just a technical detail, but a factor that directly impacts your viewing experience. Most modern routers broadcast two frequencies: one at 2.4 GHz and one at 5 GHz. Understanding the difference between them will help you avoid lag and connection drops while watching movies.
The 2.4 GHz band has a longer range and penetrates walls better, but it's heavily congested. In apartment buildings, dozens of neighboring networks, Bluetooth devices, and baby monitors operate in this band, creating interference. Speeds here rarely exceed 40-50 Mbps in real-world conditions.
The 5 GHz band offers much higher speeds (up to 300-800 Mbps and higher) and is virtually interference-free. However, it has a shorter range and is less effective at penetrating obstacles. For a TV, which is typically located in the same room as the router or through a single thin wall, this is an ideal choice.
| Characteristic | 2.4 GHz | 5 GHz |
|---|---|---|
| Signal range | High (up to 30-40 m) | Medium (up to 15-20 m) |
| Permeability of walls | Good | Bad |
| Maximum speed | Up to 150 Mbps | Up to 1 Gbps and higher |
| Interference level | High (many devices) | Short |
| Recommendation | For smart lights, sensors | For 4K TV, consoles, PC |
If your router broadcasts both networks under the same name (Smart Connect), the TV will automatically decide which one to connect to. Sometimes the algorithm makes a mistake and forces the TV to connect to a slower frequency. In this case, it's best to separate the networks in the router settings by giving them different names, for example, Home_WiFi And Home_WiFi_5G, and connect the TV to the second one.
Typical errors and methods for eliminating them
Even with proper setup, problems may still occur. One of the most common issues is the "Authentication Error" message or the endless process of obtaining an IP address. This often indicates an address conflict or an incorrect password. Try forgetting the network on the TV (the "Forget" button). Forget or Delete in the Wi-Fi menu) and reconnect.
Another common situation: the TV is connected to Wi-Fi, but displays "No internet access." Check if the internet is working on other devices. If so, the TV's date and time may be incorrect. An incorrect date causes SSL certificate errors, causing the browser or apps to block the connection.
⚠️ Note: The settings interface and menu item names may vary depending on the operating system version (Android 9, 10, 11, or Google TV) and regional firmware. If you can't find the item described, search for a similar one or refer to the official documentation for your specific model.
It's also worth mentioning the DNS issue. Sometimes ISP DNS servers are unstable. You can manually enter Google's DNS address in your TV's network settings: 8.8.8.8 or 8.8.4.4To do this, select your network, go to "Advanced" or "IP Settings," change the mode from DHCP to Static (or manually edit the DNS), and enter the numbers.
If all else fails, a radical but effective method is to reset your TV's network settings to factory defaults. This won't delete your apps, but it will restore all network settings to their original state. After rebooting, try setting up the connection again as you would on a new device.
Frequently Asked Questions (FAQ)
Why doesn't my Xiaomi TV detect my Wi-Fi router?
There could be several reasons: the signal is too weak, the router is only operating in 5 GHz mode (and the TV only supports 2.4 GHz), or the SSID is being hidden. Try moving the router closer to the TV to check.
Is it possible to share Wi-Fi from a smartphone to a TV?
Yes, this is possible using the Hotspot feature. However, keep in mind that video uses a lot of data and will drain your phone's battery quickly. This method is not recommended for continuous use.
How to improve Wi-Fi speed for 4K viewing?
Use the 5 GHz band, make sure the channel in your router settings is not overloaded (you can use Wi-Fi analyzer apps on your phone), and, if possible, reduce the distance between the router and the TV.
Do I need a special adapter for wired internet?
Most full-size Xiaomi models have a built-in LAN port. Slim or budget models may lack one, requiring a USB-to-Ethernet adapter with Android TV support.
What should I do if the password is accepted, but there is no connection?
Check your date and time settings, try changing your DNS to 8.8.8.8, and reboot your router. Also, make sure your router doesn't have a limit on the number of connected devices.