How to Connect a Samsung 3D TV to Wi-Fi: A Complete Guide with Photos

Peculiarity Samsung 3D TVs is that their network modules may require specific router settings. For example, some models do not support the frequency 5 GHz or modern encryptions like AES-CCMPWe'll cover these issues in detail and provide a troubleshooting checklist. If your TV suddenly stops connecting to the network after a firmware update or a router upgrade, you'll find a solution here.

Note: The instruction is valid for Smart TV based on Tizen (2015 and newer models) and Orsay (2012-2014). To check the software version of your TV, use the path Menu → Support → About TV.

1. Preparation: What to check before connecting

Check if 2.4 GHz network is enabled|

Set WPA2-PSK (AES) encryption|

Disable MAC filtering|

Write down the SSID and password of the network|

Please reboot your router before connecting-->

2. Method 1: Standard connection via the TV menu

This is the most common method and works on most models. Samsung 3D Smart TVThe instructions are suitable for TVs on Tizen (2015–2018) and Orsay (2012-2014), but menu paths may differ slightly.

Steps for Tizen (series J, K, MU):

1. Click the button Home (or Smart Hub) on the remote control.
2. Go to Settings → General → Network → Open network settings.
3. Select Wireless network.
4. Find yours in the list of available networks. SSID and press OK.
5. Enter your password (case sensitive!) and confirm.

Steps for Orsay (series ES, F, H):

1. Click Menu on the remote control.
2. Select Network → Network Settings → Wireless.
3. Click Search for networks and wait for the scanning to complete.
4. Select your network and click Input.
5. Enter your password and save your settings.

If the network is not displayed:

• 🔄 Restart your TV and router.
• 📶 Check that the router is not hiding SSID (the option must be disabled in the settings Hide SSID).
• 🔌 Try temporarily disabling 5 GHz- network, if the router is dual-band.

⚠️ Attention: On some models Samsung 3D TV 2012–2013 (for example, ES8000) When connecting for the first time, you may need to update the firmware via USBIf your TV asks for an update, download the latest software version from official Samsung website (Please specify the exact model!).

3. Method 2: Connecting via WPS (for supported models)

WPS (Wi-Fi Protected Setup) - a convenient method of connection without entering a password, but it does not work on all Samsung 3D TV. The function is available on most 2014 and newer models (series H, J, K), but can be disabled in the router settings.

How to connect via WPS:

1. On your TV, go to Settings → Network → Wireless Network.
2. Select Connection via WPS (PBC).
3. For 2 minutes press the button WPS on the router (usually it is labeled or blinks after pressing).
4. Wait for automatic connection (may take up to 30 seconds).

If WPS doesn't work:

• 🔄 Make sure that the function is enabled in the router settings (section Wi-Fi → WPS).
• 🔒 Check that the router is not using WPA3 — WPS is not compatible with it.
• ⚡ Reboot your router and try again.

⚠️ Attention: Some providers (eg Rostelecom or Beeline) disable WPS by default for security reasons. If the WPS button on your router doesn't respond, contact your ISP's support team.

4. Method 3: Connecting via USB/Wi-Fi adapter (if the built-in module does not work)

If built-in Wi-Fi module If your TV is broken or your router doesn't support it, you can use an external one. LAN adapter (for models with port Ethernet) or USB-Wi-Fi adapter (for TVs with support Samsung LinkStick).

Option 1: Connection via cable (LAN)

• 🔌 Connect your TV and router Ethernet cable.
• 📺 On your TV, select Settings → Network → Cable connection.
• 🔄 Wait for automatic configuration (DHCP).

Option 2: USB-Wi-Fi adapter (compatible models: Samsung WIS09ABGN, WIS12ABGNX)

1. Buy the official adapter Samsung LinkStick (or compatible, for example, Edimax EW-7811Un).
2. Connect it to USB port TV.
3. Go to Settings → Network → Wireless Network.
4. Select a network and enter the password.

Important: Not all USB adapters are compatible with Samsung Smart TVBefore purchasing, check the list of supported devices on the Samsung website. For example, chip-based adapters Ralink RT5370 often work without drivers.

5. Troubleshooting: TV won't connect to Wi-Fi

If Samsung 3D TV does not see the network or gives an error ("Unable to connect", "Authentication Error"), follow these steps:

Error 1: The network is not displayed in the list

• 🔄 Reboot your router (turn off the power for 30 seconds).
• 📶 Reduce the channel width in the router settings: set 20 MHz instead of 40 MHz.
• 🔒 Disable the guest network - Some TVs don't see it.
• 🔌 Check your router's antennas - they must be connected and directed vertically.

Error 2: Authentication error (incorrect password)

• 🔑 Make sure your password is entered in the correct case (e.g. Password ≠ password).
• 🔒 Temporarily change your router's encryption to WPA-PSK (TKIP) (less secure, but compatible with older devices).
• 📱 Connect another device (for example, a smartphone) to the network. If it also doesn't connect, the problem is with the router.

Error 3: The connection drops or lags

• 📡 Change channel Wi-Fi in the router settings (recommended channels) 1, 6, 11 For 2.4 GHz).
• 🔌 Disconnect other devices from the network - they may overload the channel.
• 🔄 Update your TV firmware (path: Settings → Support → Software Update).

⚠️ Attention: If your TV stops connecting to Wi-Fi after updating your firmware, reset your network settings: Settings → General → Reset → Reset network settingsThis will delete all saved passwords!

6. Alternative methods: SmartThings and mobile hotspot

If the standard methods don't work, you can connect the TV via SmartThings app (for 2015 and newer models) or use mobile hotspot.

Method 1: Via SmartThings (Tizen only)

1. Install the application SmartThings on smartphone (Android / iOS).
2. Register or log in to your account Samsung.
3. Click Add a device → TV.
4. Follow the on-screen instructions—the app will automatically find your TV and offer to connect it to Wi-Fi.

Method 2: Via a mobile hotspot

• 📱 Turn on Modem mode on a smartphone (Android: Settings → Network & Internet → Access Point).
• 🔐 Set a simple network name (eg. SamsungTV) and password (for example, 12345678).
• 📺 On your TV, connect to this network as you would to a regular Wi-Fi network.
• 🔄 After setup, connect the TV to the main router.

The advantage of a mobile hotspot is that it usually uses WPA2-PSK by default, which guarantees compatibility with older TVs.

7. Setting up Smart Hub after connecting to Wi-Fi

After successfully connecting to the Internet, you need to configure Smart Hub - a proprietary platform Samsung to access streaming services (Netflix, YouTube, IVI) and installation of applications.

How to set up Smart Hub:

1. Click the button Smart Hub (or Home) on the remote control.
2. Please accept the following when you first start Terms of Use.
3. Log in to your account Samsung (or create a new one).
4. Refresh your app list: Settings → Smart Hub → Update.
5. Install the required services (for example, Disney+ or Okko).

If Smart Hub does not open or gives an error:

• 🔄 Restart your TV (unplug it for 1 minute).
• 📡 Check your internet connection (in Settings → Network → Network Status there must be a status Connected).
• 🔄 Update Smart Hub through Settings → Support → Software Update.

Samsung TVs from 2012–2014 (ES and F series) use the Orsay platform instead of Smart Hub. Installing apps (such as YouTube) may require manual download via USB or using alternative launchers like Smart IP TV.

8. Frequently Asked Questions (FAQ)