Modern TVs of the brand Ericsson, running on the operating system Android TVSmart TVs provide users with wide access to multimedia content, streaming services, and internet browsing. However, to take full advantage of Smart TV capabilities, you must first ensure a stable connection between the device and your home wireless network. This process often raises questions for users, especially if their router has specific settings or an outdated firmware version.
In this article, we'll detail the steps for connecting your TV to Wi-Fi, explore the features of various interface versions, and offer effective solutions for common errors. You'll learn how to properly configure IP addressing, select a secure encryption protocol, and optimize your device's wireless network performance for maximum picture and sound quality.
Before setting up, make sure your router is working properly and you know the exact password for your Wi-Fi network, including capitalization. Entering incorrect characters or selecting the wrong frequency band (2.4 GHz vs. 5 GHz) are the most common causes of connection failure. Please note: Most Ericsson models support dual-band routers, but a stable 2.4 GHz channel is often sufficient for basic Smart TV operation.
Equipment preparation and preliminary requirements
The first step in the setup process is to check the physical condition of the equipment and the compatibility of communication standards. Make sure your router supports the standards. 802.11n or 802.11ac, as older versions may not provide sufficient speed for high-definition video streaming. It's also important that the distance between the access point and the TV allows the signal to reach the device without critical signal loss.
If you plan to use a 5 GHz network, check the specifications of your Ericsson TV, as not all budget models are equipped with this module. If in doubt, it's best to switch your router to mixed mode or temporarily use the 2.4 GHz band for initial setup and system updates.
⚠️ Note: If your router uses the SSID (network name) hiding feature, you will need to manually enter the network name on the TV remote, as the automatic search may not detect it.
Be sure to have your remote control with charged batteries ready, as navigating the settings menu requires precision. Some Ericsson remote control models feature a dedicated button for quick access to Smart functions, which can make it easier to navigate to the desired menu sections.
Step-by-step instructions for connecting via the settings menu
The main connection method is through the operating system menu. First, turn on the TV and wait for the desktop to fully load. Press the button. Settings (gear) on the remote control or find the corresponding icon in the upper right corner of the screen.
In the menu that opens, select a section Network and Internet or Wireless & NetworksHere you'll be presented with a list of available wireless networks. If your network isn't listed, try selecting "Add network" and entering the name manually.
☑️ Check before connection
After selecting your network from the list, a virtual keyboard will appear. Enter the password, being careful to ensure that both letters and numbers are capitalized. After confirming your entry, the TV will begin the authorization process and obtain an IP address. A successful connection is usually indicated by a beep and the appearance of the Wi-Fi icon in the status bar.
Some firmware versions may require manual security type selection. If automatic detection doesn't work, try cycling through the options. WPA/WPA2-Personal, as they are the most common in home networks.
Using Wi-Fi Direct to cast your screen
In addition to Internet access, Ericsson TVs support technology Wi-Fi Direct, which allows you to stream content from your mobile phone or tablet directly to a large screen without using a router. This mode is useful if your internet connection is busy or you need to stream high-quality, uncompressed video.
To activate this function, go to the network settings menu and find the item Wi-Fi DirectTurn it on, and the TV will go into connection standby mode. On your smartphone or tablet, search for available devices and select your Ericsson TV model from the list.
A connection confirmation prompt may appear on the TV screen. Accept it using the remote. Once the connection is established, you can mirror your screen or play videos from your mobile device's gallery directly on the TV.
What is the difference between Chromecast and Wi-Fi Direct?
Chromecast requires a router and data transfer via the internet or local network, while Wi-Fi Direct creates a direct connection between devices, bypassing the router, which can be faster for transferring large files, but does not provide access to online services on the TV.
It's worth noting that when Wi-Fi Direct is active, the TV's access to the global network may be limited or completely disabled, depending on the chipset model. Therefore, for watching YouTube or online cinemas, it's better to use a standard connection via a router.
Setting up a static IP address and DNS
In situations where the TV connects to the network but has no internet access, or where the connection is constantly dropping, it's recommended to try setting up a static IP address. This helps avoid addressing conflicts on a network where the router's DHCP server is unstable.
In the network selection menu, instead of quick connection, find the item Additionally or Advanced settings. Change the IP address type from DHCP on StaticYou will need to enter the following parameters manually:
- 🌐 IP address: A unique address within your subnet (for example, if your router has the address 192.168.1.1, you could give your TV 192.168.1.150).
- 🚪 Gateway: The IP address of your router (usually 192.168.0.1 or 192.168.1.1).
- 🔍 Network prefix length: Typically the value is set to 24.
- 🌍 DNS: You can use your ISP's addresses or public DNS, such as 8.8.8.8 from Google.
Properly setting up DNS servers often solves the problem of apps not loading content on the TV, even though the internet works on other devices. Try setting up alternative DNS servers if the default ones aren't working.
⚠️ Warning: When entering a static IP address, make sure the selected address is not occupied by another device on your network, otherwise a conflict will occur and both devices will lose connection.
Comparing Connection Methods: Wi-Fi vs. LAN
Although this article focuses on wireless technologies, the alternative of a wired Ethernet (LAN) connection shouldn't be ignored. For owners of Ericsson TVs with a LAN port, this can be crucial for stability, especially when viewing 4K content.
Below is a table comparing the key features of both connection methods so you can choose the best option for your situation.
| Characteristic | Wi-Fi (Wireless) | LAN (Cable) | Bluetooth (For remote control) |
|---|---|---|---|
| Signal stability | Depends on interference and distance | Maximum, without interference | High at short distances |
| Transfer speed | Up to 300-800 Mbps (actual is lower) | Up to 1000 Mbps (Gigabit) | Low (for control only) |
| Ease of installation | No wires required | Requires cable installation | No network configuration required |
| Impact on Smart TV | Buffering may occur due to poor signal conditions. | Ideal for 4K streaming | Used only for remote control |
If your Ericsson TV does not have a built-in Wi-Fi module (found in very old or specific models), the only way to access the network for Smart functions will be to connect via an external USB Wi-Fi adapter (if supported) or using a LAN cable.
Solving common connection problems and errors
One of the most common issues is when the TV sees the network, but displays "Connected, no internet access." This often indicates a DNS issue or incorrect system time. Check the date and time settings in the Settings section. General settings - time desynchronization may block secure connections (HTTPS).
If your TV doesn't see the list of available networks at all, try resetting your network settings. To do this, find the "Network" item in the network menu. Reset network settings or run the command through the engineering menu, if such an option is available in your firmware version.
Menu → Settings → Device → About TV → ResetIt's also worth checking if MAC address filtering is enabled on your router. Find your TV's MAC address in the section About TV or Network status and add it to your router's whitelist if this feature is enabled.
⚠️ Note: The menu interface and item layout may vary depending on the Android TV version and specific Ericsson model. If you can't find the item you're looking for, search for synonyms or refer to the manual.
Frequently Asked Questions (FAQ)
Why won't my Ericsson TV connect to 5GHz Wi-Fi?
Most likely, your TV model is equipped with a module that only supports the 2.4 GHz band. Check the documentation for the specific model's specifications. If 5 GHz support is advertised, make sure your router settings for this band are set to a region compatible with your location and a channel in the lower band (36-48), which is supported by most devices.
How do I reset network settings on my TV?
To reset, go to Settings, select Network and Internet, then find the item Reset network settings or Forget the network for a specific connection. In extreme cases, you can perform a full factory reset through the menu. Device → About TV → Reset, but this will delete all your apps and accounts.
Is it possible to connect a TV to a hidden Wi-Fi network?
Yes, this is possible. In the list of networks, select Add a network (usually at the very bottom of the list). Enter the exact network name (SSID), select the security type (usually WPA/WPA2), and enter the password. The TV will attempt to find and connect to the hidden access point.
Is internet required for Smart TV on Ericsson?
Yes, an internet connection is required for most Smart TV features, such as YouTube, Netflix, online cinemas, and voice search. Without an internet connection, the TV will only function as a standard receiver for watching over-the-air channels or content from external USB drives.