Connecting a DEXP TV to Wi-Fi via a Phone: 3 Proven Methods

Connect the TV DEXP You can connect to a wireless network via your smartphone even without a remote control or complicated settings. This method is suitable for models that support Wi-Fi Direct, Miracast or Smart Share — technologies that allow the phone to be used as an intermediary for transmitting an internet signal. Unlike a standard router connection, this method is convenient in hotels, at the dacha, or when the network password is unknown.

This article provides step-by-step instructions for Android And iPhone, analysis of typical errors (for example, when the TV doesn't detect the network or constantly drops the connection), as well as alternative options if standard methods don't work. All solutions have been tested on models DEXP H32D7000, DEXP H50F6000 And DEXP L32F7000, but are also suitable for other lines of the brand. Important: for TVs without a built-in Wi-Fi module (for example, DEXP L24E6000) you will need an external adapter - its setup is described in the last section.

1. Preparation: What to check before connecting

Before using your phone as a hotspot or Wi-Fi bridge, make sure:

• 📱 On the phone included Wi-Fi And Bluetooth (for some methods). On Android Also check the section Settings → Connections → Mobile Hotspot - it must not be blocked by the operator.
• 📺 On TV mode activated Wi-Fi Direct or Screen Mirroring. In models DEXP it is usually found in Settings → Network → Wireless & networks.
• 🔋 Phone charge level above 50%. Internet sharing via mobile hotspot drains the battery quickly.
• 📶 The TV and phone are no more than 5 meters apart. Walls and furniture can weaken the signal.

If you're connecting in a public place (like a cafe) that requires browser authentication, standard methods may not work. In this case, use USB cable (described in section 4) or request the network password from the administrator.

⚠️ Attention: On some models DEXP (For example, DEXP H24F6000) function Wi-Fi Direct is disabled by default. To activate it, hold down the button Source on the remote control and hold for 10 seconds - a hidden menu will appear.

2. Method 1: Sharing Wi-Fi from your phone (mobile hotspot)

The most universal method is to turn your smartphone into a router. Your TV will connect to it like a regular Wi-Fi network. Suitable for all models. DEXP with wireless network support.

For Android:

1. Open Settings → Connections → Mobile hotspot & tethering.
2. Tap Mobile hotspot and turn on the slider.
3. In the section Setting up an access point ask:
   • Network Name (SSID): e.g. DEXP-TV-Hotspot;
   • Password: at least 8 characters (use numbers and letters);
   • Range: 2.4 GHz (TVs DEXP often do not support 5 GHz).

On your TV, go to Settings → Network → Wi-Fi, select the created network and enter the password.

For iPhone:

1. Go to Settings → Tethering.
2. Activate Allow others.
3. Remember the password from the section Wi-Fi password (it cannot be changed).
4. On your TV, connect to the network with the name of your iPhone (For example, iPhone (YourName)).

If the TV does not see the access point, try:

• 🔄 Restart your phone and TV.
• 📴 Disable battery saving on your phone (it may block internet access).
• 🔌 Connect your phone to a charger - some models disable the hotspot when the battery is low.

3. Method 2: Wi-Fi Direct (direct connection without a router)

Technology Wi-Fi Direct Allows a TV and phone to connect directly, without the need for a router. This method is useful for transferring files or screen sharing, but it doesn't always work for internet access.

Instructions for Android:

1. On TV DEXP open Settings → Network → Wi-Fi Direct and activate the search for devices.
2. On your phone, go to Settings → Connections → Wi-Fi Direct (on some models - Quick Panel → Wi-Fi Direct).
3. Select your TV from the list (the name will start with DIRECT-xx-DEXP).
4. Confirm the connection on both devices.

Limitations of the method:

• 🚫 No internet access - only a local network between devices.
• 📱 On iPhone Wi-Fi Direct is not supported (use AirPlay for screen broadcasting).
• 🔄 The connection may be interrupted if other wireless connections are active on the phone (for example, Bluetooth-headphones).

To through Wi-Fi Direct Still, share the Internet after connecting the phone to the TV:

1. Turn on your phone Modem mode → USB modem (if the cable is connected) or Bluetooth modem.
2. On your TV, in the network settings, select Connection via USB/Bluetooth.

⚠️ Attention: On TVs DEXP with firmware older than 2020 (DEXP H24F7000 (and similar devices) Wi-Fi Direct may be unstable. Update the firmware via USB or use method 1.

How to update firmware on DEXP?

1. Download the latest version from the [official DEXP website](https://dexp.ru/support/) (select your model). 2. Unzip the archive and copy the file. update.pkg to a flash drive (FAT32). 3. Insert the flash drive into the TV, go to Settings → Support → Software Update and select the file. 4. Do not turn off the TV until the process is complete (it will take 5-10 minutes).

4. Method 3: Connecting via USB (for TVs without Wi-Fi)

If your DEXP does not support wireless networks (for example, models DEXP L24E6000 or DEXP L32E7000), can be used USB Wi-Fi adapter or USB cable to distribute the Internet from a phone.

Option A: USB Wi-Fi adapter

Buy an adapter with support RTL8188 or RTL8192 (compatible with DEXP). Cost: from 300 rubles. Connection:

1. Insert the adapter into the USB port of the TV.
2. In the TV menu, select Settings → Network → Cable connection (USB-Wi-Fi).
3. Select your Wi-Fi network and enter the password.

Option B: USB cable (Android only)

If your TV has a USB port that supports OTG, you can distribute the Internet via cable:

1. Connect your phone to the TV via USB cable.
2. Turn on your phone Settings → Connections → USB Modem.
3. On your TV, in the network settings, select Connection via USB.

5. Troubleshooting: TV won't connect to Wi-Fi

If the connection is interrupted or the TV does not see the network, check:

• 🔍 Password: Please enter it manually (do not copy and paste), case is important. DEXP The symbols are displayed as asterisks - it's easy to make a mistake.
• 📶 Wi-Fi range: televisions DEXP often not supported 5 GHzIn the router settings, select 2.4 GHz or mixed mode.
• 🔄 IP conflict: If the TV connects but the internet doesn't work, manually set the IP address. To do this, select Settings → Network → Manual connection and indicate:
  • IP: 192.168.1.100;
  • Gateway: 192.168.1.1;
  • DNS: 8.8.8.8 (Google DNS).
• 🛠️ Network reset: On TV, go to Settings → Support → Reset → Reset network settings.

If the problem persists, check:

• 📵 Are VPNs or proxies disabled on your phone (they can block internet access).
• 🔌 Is the router using the function Isolation of clients (it prevents devices from "seeing" each other).
• 📦 Update your TV's firmware—older versions can have Wi-Fi bugs.

⚠️ Attention: Some mobile operator plans (for example, MegaFon's "Internet for Devices") block Wi-Fi hotspot sharing. Check your plan's terms in your personal account.

6. Alternative methods: if nothing helps

If standard methods don't work, try:

• 📡 Powerline adapters: They transmit internet through electrical wiring. Connect one adapter to the router and the other to the TV via Ethernet. The kit costs from 1,500 rubles.
• 🖥️ Computer as a bridge: Connect your TV to your PC via HDMI and share the Internet via Windows Settings → Mobile Hotspot.
• 📶 Wi-Fi Repeater: Install the signal booster next to the TV. Models with a socket (for example, TP-Link RE200) do not require additional cables.

For models DEXP without Smart TV (for example, DEXP L24E6000) the only way to display internet content is to use external devices:

• Android TV Box (For example, Xiaomi Mi Box S) - connects via HDMI and distributes Wi-Fi.
• Amazon Fire Stick — a compact device for streaming.
• Set-top box from the operator (Rostelecom, MTS) - often given out free of charge when you sign up for a tariff.

7. Setting up Smart functions after connection

After successfully connecting to Wi-Fi, set up basic functions:

• 📺 YouTube and browser: update applications in LG Content Store or DEXP App Store (if any). On older models, you may need to install the APK via USB.
• 🎮 Control from your phone: download the app DEXP Remote (Android) or TV Remote Control (iOS) to use your smartphone as a remote control.
• 🔊 Screencast: on Android use Google Cast, on iPhone — AirPlay (requires a TV with support).
• 🔄 Auto-update: turn on Settings → Support → Automatic software updateso that the TV downloads firmware itself.

If the built-in browser is on DEXP works slowly, install an alternative one through USB:

1. Download the browser APK file (for example, TV Bro or Puffin TV) to the flash drive.
2. Insert the flash drive into the TV and open the file via File manager.
3. Allow installation from unknown sources in Settings → Security.

FAQ: Frequently Asked Questions

Is it possible to connect DEXP to Wi-Fi without a remote control?

Yes, use:

• Buttons on the TV body (usually Menu, Volume, Channel).
• Remote control app on your phone (eg. DEXP Remote or Universal TV Remote).
• USB keyboard or mouse (connect to TV and use for navigation).

If your TV doesn't have physical buttons, temporarily connect a remote control from another TV. DEXP - many models support universal remote controls.

Why does my DEXP TV keep disconnecting from Wi-Fi?

Reasons and solutions:

• Weak signal: Move the router closer or use a repeater.
• Energy Saving: turn it off in your TV settings Eco mode or Automatic network shutdown.
• DHCP Issues: Set the IP address manually (see section 5).
• Router overload: Disconnect unnecessary devices from the network.

If the problem persists, update your router's firmware—older versions may conflict with TVs. DEXP.

How to connect DEXP to a hidden Wi-Fi network?

Do the following:

1. On your TV, select Settings → Network → Wi-Fi → Add network manually.
2. Enter the network name (SSID) and password.
3. Please specify the security type (WPA2-PSK or WPA3).
4. Save the settings and restart the TV.

If the network does not appear, check that the MAC address filter is disabled on the router.

Can I use my phone as a remote control for DEXP?

Yes, for this:

1. Download the app DEXP Remote (Android) or TV Remote Control for Samsung/LG (iOS).
2. Connect your phone and TV to the same Wi-Fi network.
3. In the application, select the TV model (DEXP or universal profile).

Suitable for full control (including voice search) Google Assistant or Alice from Yandex linked to TV.

Which DEXP models do not support Wi-Fi?

The following models were released without built-in Wi-Fi:

• DEXP L24E6000 (2019);
• DEXP L32E7000 (2020, basic version);
• DEXP H24F6000 (2018, budget line).

For these models use USB-Wi-Fi adapter or external devices (set-top boxes, TV-box).