Wirelessly cast your screen from your phone Honor on TV Samsung Opens up a host of possibilities: from watching movies on a big screen to showing presentations without the hassle of wires. However, many users encounter difficulties when first connecting—devices don't "see" each other, the connection drops, or the picture lags. In this article, we'll look into all current connection methods via Wi-Fi, including Wi-Fi Direct, Miracast and proprietary technology Smart View from Samsung.
It's important to understand that connection stability depends not only on device models, but also on firmware version, network congestion, and even the distance between devices. We tested the instructions on the latest models. Honor 90, Honor Magic 5 and televisions Samsung QLED QN90C/Crystal UHD AU7000, but most methods also work on devices from 2018 to 2023. If your device is older, check support Miracast in the specifications.
Before you begin, make sure both devices are connected to the same Wi-Fi network (for some methods) or within range of each other (up to 10 meters without obstacles). We also recommend disabling the VPN on your phone, as it may block the local connection.
1. Connecting via Wi-Fi Direct: A universal method for all models
Wi-Fi Direct — is a technology that allows devices to connect directly without a router. It is supported by almost all phones. Honor (starting from Honor 8) and televisions Samsung since 2016. The main advantage of the method is no connection to a shared network is required, just enable the function on both devices.
To activate Wi-Fi Direct on TV Samsung, follow these steps:
- 📺 Press the button on the remote control
Source(Source) → selectScreen Mirroring(orWi-Fi Directin older models). - 🔍 Find the option in the menu
Devices nearbyorSearch for devicesand activate it. - 📱 On the phone Honor open
Settings → Connections → Wi-Fi→ tap the three dots in the upper right corner → selectWi-Fi Direct. - 🔄 Wait for your phone to find the TV (this may take up to 30 seconds) and confirm the connection on both devices.
If your TV doesn't appear in the list, try:
- 🔄 Restart both devices.
- 📶 Make sure the distance between them does not exceed 5 meters (walls and furniture weaken the signal).
- 🔧 Update your TV firmware via
Settings → Support → Software Update.
Phone and TV are charged more than 30%|Wi-Fi Direct is enabled on both devices|No active VPN connections on the phone|Distance between devices ≤ 5 meters-->
⚠️ Attention: On some models Samsung (for example, series J or K) functionWi-Fi Directcan be calledAllShareorScreen MirroringIf you can't find this item in the menu, check the instructions for your model—the interface may differ.
2. Using Miracast: A wireless broadcasting standard
Miracast — is an industry standard for wireless transmission of image and sound, supported by most modern Android devices, including HonorOn TV Samsung This technology is integrated into the function Screen MirroringThe advantage of the method is low latency (important for gaming) and no need for a router.
Connection instructions:
- On TV Samsung:
- 📺 Click
Sourceon the remote control → selectScreen Mirroring. - 🔄 Wait for the message “Ready to connect” or “Waiting for connection”.
- 📺 Click
- 📱 Open
Settings → Connections → More (⋮) → Wireless Display(orWireless Display). - 🔍 Find the name of your TV in the list (for example,
Samsung-65QN90C) and tap on it. - ⏳ Wait 10–20 seconds – the image from your phone should appear on the TV screen.
If the connection fails:
- 🔧 Check if your phone supports it MiracastOn some budget models (for example, Honor 8A) this feature may be absent.
- 📶 Make sure your TV is turned on
Detection mode(in settingsScreen Mirroring). - 🔄 Restart your router if you have one on your network—background channel scanning can sometimes interfere.
What to do if Miracast doesn't work on Honor?
On some EMUI firmware versions (especially versions 9–10), the wireless display feature may be hidden. To enable it:
1. Turn on Developer mode (Settings → About phone → tap “Build number” 7 times).
2. Return to Settings → System → Developer options and find the option Wireless display (Wireless Display).
3. If there is no option, update the firmware via HiSuite or manually from the official website Huawei (support section Honor).
| Problem | Possible cause | Solution |
|---|---|---|
| The TV is not showing up in the list. | No support Miracast on the phone | Use Smart View or check model compatibility |
| The connection is lost after 10 seconds. | Weak Wi-Fi Direct signal | Reduce the distance, remove obstacles |
| No sound during broadcast | The wrong source is selected on the TV. | Check it out Sound Settings → Source on TV |
| The picture is slow | Wi-Fi channel congestion | Switch your router to the 5 GHz channel or turn off other devices |
3. Smart View (Screen Mirroring): Samsung's proprietary solution
Technology Smart View (formerly known as Screen Mirroring) is a proprietary solution from Samsung, optimized for their TVs. It works more reliably. Miracast on devices with Android 8.0+ and supports broadcasting in resolutions up to 4K (on compatible models). For phones Honor This method is suitable if they work on EMUI 9.0 and newer.
Step-by-step instructions:
- On TV:
- 📺 Press on the remote control
Home→ selectScreen Mirroring(orSmart Viewin new models). - 🔄 Wait until the message “Waiting for connection” appears.
- 📺 Press on the remote control
- 📱 Swipe down to open the notification panel → find the icon
Smart View(orWireless Projection). - 🔍 Select your TV from the list Samsung (For example,
UE65AU8000). - ✅ Confirm the connection on both devices.
Peculiarities Smart View:
- 🎮 Supports game mode low latency (useful for streaming games from your phone).
- 📶 Works only when the phone and TV are connected to one Wi-Fi network (in contrast to Wi-Fi Direct).
- 🔊 Transmits sound automatically, without additional settings.
⚠️ Attention: On TVs Samsung 2018 and later (series MU, NU) function Smart View may require installation of an additional application Samsung SmartThings to your phone. Download it from AppGallery or Google Play.
4. Connect via the SmartThings app: Advanced features
Application Samsung SmartThings not only duplicates the function Screen Mirroring, but also allows you to control your TV from your phone, stream individual files (photos, videos), and even use your phone as a remote control. This method is suitable if standard methods don't work or if you need additional features.
How to connect:
- 📱 Install SmartThings from AppGallery or Google Play.
- 🔗 Register or log in to your account Samsung (can be used Google or Apple ID).
- 🏠 In the app, click
Add a device→ selectTV→ follow the instructions on the screen. - 🔍 Once your phone finds your TV, confirm the connection on the TV (you may be asked to enter a PIN code).
- 🖥️ After connecting, select the option
Screencasting(orMirror Screen).
Advantages SmartThings:
- 📁 You can stream separate files (for example, only photos from the gallery), not the entire screen.
- 🎚️ There is an option to adjust the stream quality (useful for slow Wi-Fi).
- 🔄 Automatically connects to the TV when on the same network.
5. Troubleshooting common errors
Even if you follow the instructions correctly, the connection may not work. Let's look at common problems and their solutions:
1. The TV is not in the list of devices
- 🔧 Check if the TV is in the "Off" mode.
Screen Mirroring(Settings → General → External devices → Devices to connect). - 📶 Make sure your phone and TV are connected one Wi-Fi network (For Smart View).
- 🔄 Restart your router - sometimes it blocks local device discovery.
2. The connection drops after a few seconds
- 📶 Switch your router to a different frequency
5 GHz(less busy than2.4 GHz). - 🔋 Check your phone's charge - some models turn off when the charge level is below 15%. Miracast to save energy.
- 🔧 Turn it off adaptive brightness on the phone (
Settings → Display).
3. There is no sound during broadcasting
- 🔊 Check that the sound isn't muted in the TV settings.
Sound → Source. - 📱 On your phone, in the notification panel, make sure that the sound is transmitted to
Bluetooth device(sometimes the system confuses connections). - 🔄 Reconnect your devices—sometimes the sound is picked up on the second try.
4. The image is slow or choppy.
- 📶 Close background apps on your phone (especially instant messaging and streaming services).
- 🔄 Reduce the broadcast resolution in the settings Smart View (if available).
- 🌐 Connect your phone to the router via cable (if supported) - this will reduce the load on your Wi-Fi.
⚠️ Attention: On TVs Samsung with the operating system Tizen versions below 4.0 (released before 2019) may not be supportedHEVC(codec for high-definition video). In this case, video streaming in4Kwill be impossible - you will have to lower the resolution to1080p.
6. Alternative connection methods
If wireless methods don't work or you need maximum stability, consider alternatives:
1. Connecting via HDMI adapter
- 📱 Buy an adapter
USB-C → HDMI(for new models Honor) orMicro-USB → HDMI(for old people). - 🔌 Connect the adapter to your phone and the HDMI cable to your TV.
- 🖥️ On your TV, select the appropriate
HDMI inputas a signal source.
✅ Pros: no delays, supports 4K@60Hz, does not depend on Wi-Fi.
❌ Cons: requires the purchase of an adapter (from 500 ₽), limits mobility.
2. Using Chromecast or other streamers
- 📺 Connect Google Chromecast, Apple TV or Xiaomi Mi TV Stick to the TV's HDMI port.
- 📱 Install the corresponding application (Google Home, Apple AirPlay or Mi Home).
- 🔄 Cast your screen using the feature
Cast(in the notification shade or in apps like YouTube).
✅ Pros: Supports almost all applications, stable connection.
❌ Cons: additional costs for the device (from 3,000 ₽).
3. DLNA for media file transfer
- 📱 Install a DLNA app on your phone (for example, BubbleUPnP or LocalCast).
- 🖥️ On your TV, enable DLNA in the network settings.
- 📁 Select a file (video, photo, music) on your phone and send it to the TV.
✅ Pros: does not require broadcasting the entire screen, saves battery power.
❌ Cons: Works only with media files, does not stream games or applications.
7. Optimize your connection for stable streaming
To avoid lags and connection drops, follow these tips:
1. Setting up the router
- 📶 Switch to range
5 GHz- it is less congested and provides greater throughput. - 🔄 In the router settings (
192.168.1.1or192.168.0.1) turn it offBand Steering(if any) - it may interfere with the local connection. - 🔒 Set a fixed channel (eg.
36or149) instead of automatic selection.
2. Phone settings
- 📱 Turn on
Airplane mode, and then manually enable only Wi-Fi - this will disable background processes. - 🔋 Turn it off battery optimization for applications Smart View or SmartThings (
Settings → Apps → ⋮ → Special access → Battery optimization). - 🎮 For games, reduce the phone screen resolution to
720p(Settings → Display → Resolution).
3. TV settings
- 📺 Turn it off
Energy savingin the screen settings - it may reduce the quality of the broadcast. - 🔊 Install
Sound modeVStandard(and notAdaptiveorOptimized). - 🔄 Update firmware via
Settings → Support → Software Update.
8. Comparison of connection methods: which one to choose?
Each method has its pros and cons. The choice depends on your goals:
| Method | Pros | Cons | Better for |
|---|---|---|---|
| Wi-Fi Direct | No router required, low latency | Limited range, possible interference | Fast streaming without a network |
| Miracast | Standardized, works on most devices | Sensitive to interference, may slow down | Watching movies, presentations |
| Smart View | More stable than Miracast, supports 4K | Requires one Wi-Fi network | Regular use at home |
| SmartThings | Additional functions (management, file transfer) | You need to install the app | Advanced users |
| HDMI adapter | No delays, maximum quality | Limits mobility, additional costs | Games, professional work |
For most users, the optimal solution would be Smart View — it combines stability and ease of setup. If your TV is older than 2018, try Wi-Fi Direct or SmartThingsFor gaming or working with graphics, it is better to use HDMI adapter.
Please remember that the quality of the broadcast depends on the power of your phone. For example, Honor Magic 5 Pro with a processor Snapdragon 8 Gen 2 cope with 4K@60Hz, while the budget one Honor X8a can only issue 1080p@30Hz.
FAQ: Frequently Asked Questions
My Honor phone can't find my Samsung TV. What should I do?
Please check the following points:
- 🔧 Is the TV turned on?
Screen Mirroring(Settings → General → External devices). - 📶 The phone and TV are connected to the same Wi-Fi network (for Smart View).
- 🔄 Restart both devices and the router.
- 📱 Update the firmware on your phone via
Settings → System → Software Update.
If nothing helps, try connecting via SmartThings or HDMI adapter.
Is it possible to mirror the screen from Honor to Samsung without Wi-Fi?
Yes, use it for this Wi-Fi Direct or MiracastBoth methods create a direct connection between devices without the need for a router. However, keep in mind:
- 📶 The distance between the phone and the TV should not exceed 5–7 meters.
- 🔋 Battery consumption will be higher than when connected via a shared network.
Why is there no sound during the broadcast?
Sound issues are usually related to your TV or phone settings. Try:
- 🔊 Check that the sound on your TV isn't muted.
Settings → Sound → Source. - 📱 On your phone, in the notification panel, make sure that the sound is transmitted to the TV and not to the phone speaker.
- 🔄 Reconnect your devices—sometimes the sound appears on the second try.
- 🔧 If you use SmartThings, check the sound settings in the application.
If the sound still does not appear, try a different connection method (for example, HDMI adapter).
How to reduce lag when streaming games?
To minimize delay:
- 📶 Connect your phone and TV to the router via
5 GHzor use Wi-Fi Direct. - 📱 Reduce your phone's screen resolution to
720p(Settings → Display). - 🎮 Turn on
Game modeon TV (Settings → General → External devices). - 🔌 Use HDMI adapter - This is the only way to get a latency of less than 20 ms.
On phones Honor with a processor Kirin 9000 or Snapdragon 8 Wireless broadcast latency is typically 50-100ms, which is noticeable in fast-paced games.
Is it possible to mirror the screen from Honor to Samsung via Bluetooth?
No, Bluetooth does not support screen mirroring.This technology is only designed for transmitting audio (for example, connecting headphones) or exchanging small files. For video streaming or screen mirroring, you need Wi-Fi (through Miracast, Smart View etc.) or HDMI.