How to stream YouTube from iPhone to TV via Wi-Fi: All the methods 2026

Do you want to watch your favorite videos on YouTube not on the small screen iPhone, and on a large TV - but without unnecessary wires? Connection via Wi-Fi This problem can be solved in minutes if you know the nuances. Depending on your TV model and version iOS There are several methods available at once: from the built-in AirPlay to universal apps like Google Chromecast.

The main advantage of wireless streaming is freedom of movement: you can continue using your phone while the video plays on the screen. However, not all TVs support direct streaming. iPhone "out of the box". In this article we will analyze all current connection methods, including workarounds for older TV modelsWe'll also tell you how to avoid common mistakes—for example, when the sound comes from your phone and the picture comes from your TV.

1. Checking compatibility: what you need to connect

Before you try to connect iPhone and TV, make sure your equipment meets the minimum requirements. Here are the key points:

• 📱 iPhone: version iOS not lower than 12.0 (for AirPlay 2 — 13.0+). On older models iPhone 6s There may be problems with the smoothness of the broadcast.
• 📺 TV: must support at least one of the protocols - AirPlay 2, Miracast, DLNA or have a built-in Chromecast. Modern Samsung, LG (With webOS 4.0+) And Sony (With Android TV) are usually compatible.
• 🌐 Wi-Fi router: Both devices must be connected to one network on frequency 2.4 GHz or 5 GHzThe router must support multicast traffic (enabled by default on most models).

If your TV was released before 2018, it most likely does not have a built-in AirPlayIn this case, you will need an external device - for example, Apple TV (from 4th generation) or Google Chromecast (any version). Also check if your TV firmware is up to date: for example, Samsung added support AirPlay 2 for 2019–2020 models only after the update.

⚠️ Warning: On TVs TCL And Hisense With Android TV 9.0 and below may not work broadcasting with iPhone through AirPlay due to manufacturer restrictions. In this case, use Google Chromecast or application SmartThings.

2. Method 1: AirPlay is the easiest method for the Apple ecosystem

AirPlay - this is a proprietary technology Apple, which allows you to broadcast content from iPhone to compatible devices, including TVs. The main requirement is that both the phone and TV must be on the same network. Wi-Fi.

Step-by-step instructions:

1. Open on iPhone application YouTube and select a video to watch.
2. Tap on the icon "Broadcast" (rectangle with a triangle at the bottom of the screen).
3. From the list of available devices, select the name of your TV (for example, Bedroom (LG OLED)).
4. If a code is requested, enter it from the TV screen.

The video will start playing on your TV, and on iPhone The control panel will remain (you can pause, rewind, or select other videos). If the broadcast is interrupted, check:

• 🔄 Restart your router - sometimes resetting the network helps.
• 📶 Make sure the signal Wi-Fi stable (at least 2-3 divisions of the indicator on the phone).
• ⚙️ On the TV in the settings AirPlay turn on the option Allow all (if any).

Wi-Fi is on and the same on both the phone and TV. | The TV supports AirPlay 2. | Bluetooth is enabled on the iPhone (needed for initial setup). | The TV firmware is updated.

⚠️ Note: On some TVs Samsung 2020–2021 AirPlay may be disabled after a firmware update. To restore the function, go to Settings → General → Apple AirPlay and activate it again.

3. Method 2: Google Chromecast – a universal solution

If your TV does not support AirPlay, but you have a device Google Chromecast (or built-in Chromecast V Android TV), use it. This method works even on older models. iPhone (starting from iOS 10).

Algorithm of actions:

1. Connect Chromecast to the TV via the port HDMI and set it up (follow the on-screen instructions).
2. Make sure that iPhone And Chromecast in the same network Wi-Fi.
3. Open YouTube On your phone, select a video and tap the broadcast icon.
4. In the list of devices, select yours Chromecast (For example, "Chromecast1234").

The advantage of this method is that it supports resolutions up to 4K HDR (if the model allows Chromecast). However, there are some nuances:

If you don't have physical Chromecast, but the TV works on Android TV, check if it has a built-in Google CastTo do this:

1. Press the button on the TV remote control Home (home).
2. Go to Settings → Network & Access → Google Cast.
3. Activate the option "Allow remote control".

4. Method 3: Manufacturer's applications (SmartThings, LG TV Plus)

Many brands release their own apps for controlling TVs from mobile devices. These often support content streaming, including YouTubeLet's consider two popular options:

For Samsung TVs: SmartThings

Application SmartThings Allows you to not only control your TV but also stream video to it. Instructions:

1. Download SmartThings from App Store and register.
2. Add your TV to the app (it must be on the same network Wi-Fi).
3. Open YouTube on iPhone, click "Share" and select "SmartThings".
4. Select a TV from the list.

Limitation: on some models Samsung 2019 broadcast works only for video in resolution up to 1080p.

For LG TVs: LG TV Plus

To the owners LG With webOS the app will do LG TV Plus. Feature: It supports not only broadcasting but also screen mirroring (Screen Mirroring). To transfer video from YouTube:

1. Install LG TV Plus and connect to the TV.
2. In the application, select the tab Media.
3. Click "Stream from device" and select a video from YouTube.

⚠️ Warning: On TVs LG With webOS below 4.0 broadcast via LG TV Plus may work unstable. Update your TV firmware or use Google Chromecast.

5. Method 4: Screen Mirroring

If you need more than just broadcasting YouTube, but also completely duplicate the screen iPhone on TV, use the function Screen Mirroring (screen mirroring). This works on most modern TVs with AirPlay 2 or Miracast.

How to enable:

1. On iPhone swipe down from the top right corner to open Control center.
2. Press and hold the music control block (in the upper right corner).
3. Tap on Screen mirroring (or "Screen Mirroring").
4. Select your TV from the list.

Once connected, everything that happens on your phone's screen will be displayed on your TV. This makes it convenient for viewing. YouTube, but keep in mind:

• 🔋 Battery consumption iPhone will increase by 30–40%.
• 📶 Sound delays of up to 1–2 seconds are possible (depending on the router).
• 🎮 Not all games and apps support duplication due to copyright protection.

Why might Screen Mirroring not work?

If your TV does not appear in the list of devices, check:

1. Does your TV model support it? AirPlay 2 or Miracast (a list of compatible devices is available on the manufacturer’s website).

2. Is the TV in standby mode (Quick Start or Fast Startup) - sometimes it blocks device detection.

3. Are there any restrictions in the router settings (for example, client isolation or multicast traffic filtering).

6. Method 5: Alternative applications (ApowerMirror, TV Cast)

If standard methods don't work, try third-party apps. They often support older TV models and offer additional features, such as screen recording.

ApowerMirror

This app allows you to mirror your screen. iPhone on TV via Wi-Fi even without AirPlayFor work:

1. Download ApowerMirror on iPhone and install the server part on the TV (if it is Android TV).
2. Connect both devices to the same network.
3. On your phone, launch the app and select "Mirror to TV".
4. Follow the on-screen instructions to pair.

Cons: The free version contains ads and watermarks. The full version costs about 500 rubles.

TV Cast for YouTube

Application TV Cast specializes in broadcasting YouTube and other video services. Its unique feature is support for subtitles and playlists. How to use:

1. Install TV Cast from App Store.
2. Open the video in YouTube and copy the link.
3. Paste the link in TV Cast and select a device for broadcasting.

The application is paid (about 300 rubles), but offers a trial period.

7. Troubleshooting: What to do when nothing works

If none of the methods worked, check the following points:

If the problem persists, try a hard network reset:

1. On iPhone go to Settings → Wi-Fi.
2. Click on the icon "i" next to your network and select "Forget this network".
3. Restart your phone and reconnect to the network.
4. Restart your TV (unplug it from the power outlet for 30 seconds).

In 90% of cases this helps to restore the connection.

FAQ: Answers to Frequently Asked Questions

Is it possible to stream YouTube from iPhone to TV without Wi-Fi?

Yes, but with restrictions. Options:

• Use Apple TV with connection via Bluetooth (for control only, video will go through Wi-Fi Direct).
• Connect iPhone to the TV via an adapter Lightning → HDMI (wired method).
• On some TVs Samsung works Smart View through Wi-Fi Direct (without router).

However, for stable broadcasting Wi-Fi remains the preferred option.

Why are the video and audio out of sync when streaming YouTube via AirPlay?

This is a typical problem when the signal is weak. Wi-Fi or a congested network. Try:

1. Switch to range 5 GHz (if the router is dual-band).
2. Disable other devices that consume traffic (for example, torrents or online games).
3. Enable it in your router settings. QoS (Quality of Service) and set priority for Apple TV or TV.

If the problem persists, try another streaming method (for example, Chromecast).

Is it possible to stream YouTube Premium from iPhone to TV?

Yes, all methods in this article support content streaming. YouTube Premium, including:

• Video without unnecessary fluff.
• Background playback (the sound will come from the TV even if the screen is iPhone turned off).
• Downloaded videos (if they are available for offline viewing).

Restriction: Some videos are marked "For mobile devices only" are not broadcast on TV.

How to stream YouTube from iPhone to TV if they are on different Wi-Fi networks?

Standard methods (AirPlay, Chromecast) require the devices to be on the same network. Workarounds:

• Use mobile hotspot: turn on distribution Wi-Fi With iPhone and connect your TV to it (if it supports connecting to an access point).
• Apply applications like ApowerMirror with function "Connection by PIN code" (works via a local network created by the application itself).
• Use Apple TV with connection via Ethernet (if the TV supports wired connection).

Please note that in these cases the broadcast quality may deteriorate.

Why does YouTube show the error "Video is unavailable for playback" on my TV?

This error occurs for several reasons:

• The video has regional restrictions (for example, only available in the US).
• Content is protected by copyright (for example, movies or music videos).
• The TV has an outdated version of the app. YouTube (update it through App Store TV).
• Are you using a VPN on iPhone, but the TV doesn’t (or vice versa).

Solution: Try opening the same video directly on your TV using the built-in app. YouTube.