Modern users rarely use computers to print documents, as it is much more convenient to send a file directly from a phone. Model Canon Pixma G3415 It is one of the most popular solutions for home and small offices thanks to its cost-effective continuous ink supply system. However, the initial wireless connection setup Wi-Fi often raises questions among those who encounter this device for the first time.
The process of synchronizing a mobile device and a printer does not require in-depth technical knowledge, but it does require following a certain sequence of steps. Depending on your operating system, whether Android or iOSThe algorithm may differ slightly. In this article, we'll cover all the steps in detail, from preparing the equipment to resolving common connection errors.
Successfully integrating your gadget into your network will unlock advanced functionality, including scanning documents directly to cloud storage. It's important to understand that connection stability directly depends on the router's signal strength and the correctness of your network security settings. Let's move on to the practical part of setting up your device.
Preparatory stage and network requirements
Before attempting to connect your smartphone and printer, you need to make sure the underlying hardware is ready for use. Make sure the printer is Canon Pixma G3415 cartridges are installed, ink is poured into the system tanks CIS, and paper is loaded in the tray. Without these conditions, the device may not appear in the list of available devices for connection.
A critical factor is the Wi-Fi network frequency. Many modern routers broadcast signals in two bands: 2.4 GHz and 5 GHz. G3415, like most budget MFPs, only supports the standard 2.4 GHzIf your phone is connected to a 5GHz network, you may not see the printer in the list of available devices during initial setup.
β οΈ Note: If your router combines both frequencies under one name (Smart Connect technology), automatic detection may be difficult. In this case, we recommend temporarily separating the networks in your router settings or using the direct connection method.
It's also worth checking that the wireless function is enabled on the printer itself. The Wi-Fi indicator on the control panel should be blinking or steady, indicating the module is ready for use. If the indicator is not active, you will need to manually activate wireless mode through the device's menu.
For successful setup, you'll also need to know the password for your home Wi-Fi network. This is standard procedure in most cases, but if you've recently changed your router settings, make sure the password is entered correctly, including case-sensitive letters and special characters.
Using the Canon PRINT Inkjet/SELPHY app
The main tool for managing printing from mobile devices is the proprietary application Canon PRINT Inkjet/SELPHYIt is available for free download in stores. Google Play And App StoreThis program provides the most stable and functional interaction between the smartphone and the MFP.
After installing the app, launch it and click the "Add Printer" button. The program will automatically search for devices on your local network. If the printer is already connected to the router, it will appear in the list. If the device is new, the app will prompt you to perform initial setup via Bluetooth or a direct connection.
During setup, the app will request permission to access geolocation. This is a requirement of the operating system. Android This permission is necessary to scan for available Wi-Fi networks, even if the app itself doesn't use your coordinates. Without this permission, the printer search may fail.
Follow the on-screen instructions, selecting your home network from the list and entering the password. At this point, your phone will temporarily switch to a direct connection with the printer to transfer the router settings. Once the process is complete, the device will return to the regular network, and the printer will be able to access the internet.
βοΈ Check before installing the app
Direct Connection Method
If you are away from home or the router is temporarily unavailable, you can use the mode Direct ConnectionIn this case, the printer Canon Pixma G3415 Creates its own Wi-Fi hotspot that your smartphone connects to. Printing will be done directly, without the need for a router.
To activate this mode, press the wireless button on the printer's control panel. Continue holding it until the power and wireless lights begin flashing alternately. After this, the model name will appear in the list of available Wi-Fi networks on your smartphone screen, for example, Canon_ij_G3410_series.
When connecting to such a network, the system will ask for a password. By default, it is located on a sticker on the device or in the user manual. Typically, it is an 8-digit combination. After entering the password, the phone will connect to the printer, and you can print documents.
| Parameter | Infrastructure mode (Router) | Direct connection |
|---|---|---|
| Internet access | Yes (via router) | No (print only) |
| Distance | Within Wi-Fi coverage | Up to 50 meters (line of sight) |
| Transfer speed | High | Average |
| Number of users | Multiplayer | One user |
It's worth noting that in direct connection mode, your phone will lose access to the mobile internet, as the Wi-Fi module is busy connecting to the printer. This is important to keep in mind if you need to print a document received via messenger but don't have an internet connection.
Setup via WPS (Wi-Fi Protected Setup)
For those who don't want to manually enter passwords and search for networks, there is a technology WPSIt allows you to connect a printer. Canon Pixma G3415 With your router, simply by pressing buttons. This method only works if your router supports this feature, which is true for most modern models.
Click the button Wireless on the printer's control panel and hold it until the power light turns green. Then press the WPS button on your router. Within two minutes, the devices should automatically find each other and establish a secure connection.
What should I do if the WPS button on my router doesn't work?
Some ISPs block the WPS feature for security reasons, or it may be disabled in the router's default settings. In this case, try logging into the router's web interface (usually at 192.168.0.1 or 192.168.1.1) and finding the Wireless Security section to enable the feature. If this fails, use the standard password entry method through the app.
The wireless indicator on the printer should stop blinking and turn solid, indicating a successful connection. If the indicator continues blinking or remains orange, the connection has not been established, and you'll need to repeat the process moving closer to the router.
The advantage of the WPS method is the highly automated process. You don't need to worry about entering the password correctly, eliminating human error. However, if the router is far from the printer, the signal strength during the handshake process may be too weak for successful pairing.
Printing and scanning from iPhone and Android
Once successfully connected, you can start using all the features of the MFP. For users iOS technology is available AirPrint, which allows you to print directly from the Share menu without installing additional apps. Simply select a document or photo, click the button, and select your Canon Pixma G3415.
On devices Android The situation is similar, especially on modern versions of the operating system, where printing support is built in by default. However, to access scanning and printer maintenance functions, you need to use the app. Canon PRINT remains mandatory.
The app not only lets you print, but also scan documents directly to your phone's memory. You can choose the file format (PDF or JPEG), scanning resolution and even send scanned copies directly to email or cloud services.
Pay attention to print quality when working with photos. You can select the paper type in the app settings, which is critical for proper ink distribution. Using the "Matte Paper" mode for glossy photos will result in smearing and longer drying times.
Diagnostics and problem solving
Despite the simplicity of setup, users may encounter difficulties. One of the most common issues is that the printer isn't visible on the network. In this case, check that both devices are connected to the same Wi-Fi network. It's often the case that the phone is connected to 4G mobile data rather than your home Wi-Fi.
Another reason could be static IP address or an address conflict on the network. Try rebooting the router and printer. In most cases, this resolves the DHCP address assignment issue and restores visibility of the device.
β οΈ Caution: If the Wi-Fi indicator on the printer is flashing rapidly, this may indicate a connection error. Check that the password you entered is correct. If you enter the wrong password five times, the wireless module may be temporarily blocked.
It's also worth mentioning the issue with drivers on older versions of Android. If the app doesn't launch or is unstable, make sure your operating system version is at least Android 7.0Older versions may require using alternative printing methods or updating your phone software.
Firmware update and maintenance
To ensure stable operation of your device, it is recommended to periodically update its software. Updates Firmware often contain security fixes and improve compatibility with new versions of mobile operating systems.
You can check for updates through the app. Canon PRINT In the device information section or through the printer's web interface. To access the web interface, enter the printer's IP address in the address bar of a browser on a computer connected to the same network.
Regular maintenance also includes cleaning the print head if print quality has deteriorated. This function is accessible via the smartphone app. Don't allow the ink to dry out in the nozzles, especially if the printer hasn't been used for a long time.
Remember that using original ink or high-quality analogs recommended for the system CIS, extends the life of the print head. Cheap ink can clog microfilters, which are often impossible to clean at home.
Why doesn't the printer print even though it's connected to Wi-Fi?
Most often, the problem lies in the print queue status or the incorrect default printer selection. Check if the document is queued with the "Error" status. Also, make sure that the correct printer is selected in your phone settings. Canon Pixma G3415, not a virtual printer (for example, "Save as PDF").
Is it possible to connect a printer to a hidden Wi-Fi network?
Yes, this is possible, but automatic network scanning won't work. You'll have to manually enter the network name (SSID) and encryption type in the printer's wireless settings via the menu on the device itself or via specialized software on your PC, as the mobile app typically only scans for visible networks.
How to reset network settings on Canon G3415?
To reset network settings, press and hold the wireless button on the printer's control panel until the power light flashes once, then release it. Immediately afterward, press the color copy button. The wireless light should begin flashing rapidly, indicating that the LAN settings have been reset.