Modern gaming consoles and TVs offer a variety of interaction scenarios that go far beyond a simple HDMI connection. When it comes to connectivity PlayStation 4 and TV Sony Bravia, users are often looking for ways to eliminate unnecessary cables or stream images to other screens in the home. While direct HDMI remains the standard for low-latency gaming, wireless technologies are opening up new possibilities for streaming, control, and multimedia.
It's important to clarify a technical detail right away: "connecting via Wi-Fi" can refer to different usage scenarios. This could be a function Remote Play, which allows you to broadcast the game from the console to other devices over the network, or using the protocol DLNA to play media content stored on the set-top box's hard drive directly on the TV. Understanding the differences between these methods is critical to achieving the desired result.
In this article, we'll take a detailed look at all the available methods for wirelessly integrating your console into the ecosystem. SonyWe'll cover the necessary router settings, local network parameters, and software solutions that transform your TV into a fully-fledged entertainment control center. Being prepared to configure network settings will be key to success.
⚠️ Please note: Direct transmission of the game's video signal (gamepad image) to the TV exclusively via Wi-Fi without using an HDMI cable for the console itself is technically impossible using standard means. The console must be connected to the TV via a cable for image output, while Wi-Fi is used for network functions, remote play on other devices, and access to media files.
Before setting up complex network interactions, you need to ensure your home network's basic infrastructure is ready for heavy loads. Game streaming and high-definition video transmission require a stable, high-bandwidth connection. If your router is located in a remote room or behind thick walls, connection quality may be unstable.
- 📶 Make sure both your console and TV are connected to the same subnet (SSID) of your router.
- 🚀 To minimize delays, it is preferable to use a range 5 GHz, which is less congested than 2.4 GHz.
- 🔌 Make sure your internet connection speed meets the streaming requirements (minimum 15 Mbps).
- 🛡️ Make sure that AP Isolation, which blocks communication between devices within the network, is not enabled in your router settings.
Optimal network configuration is the foundation without which any software settings will not function correctly. Many users ignore this step, trying to fix software issues when the root cause lies in a weak signal or incorrect DHCP settings. Take the time to check the signal quality where the console is installed.
The most popular query in the context of wireless communication is technology Remote PlayIt allows you to broadcast an image from your PS4 to other devices that support this feature, including TVs Sony Bravia with the Android TV operating system. This is ideal if you want to play games without occupying the main screen, or if the console is in another room.
To implement this scenario, your TV Sony Bravia must run on OS Android TVOn older Linux models, this feature may not be available through the built-in app. First, you need to prepare the console itself: go to Settings → Remote Play Settings and check the box "Allow remote playback".
☑️ Preparing PS4 for Remote Play
Next, we move on to the TV. On the main screen Sony Bravia go to the app store Google Play StoreYou will need to find and install the application. PS Remote PlayAfter installation, launch the application and log in to your account. PlayStation Network (PSN) using the same data as on the console.
The pairing process is usually automatic if the devices are on the same network. The app on the TV will begin searching for an available console. If the search takes too long, check whether your router's firewall is blocking the connection. Also, make sure the console's "Wake on LAN" feature is enabled in the power saving settings.
⚠️ Please note: When using Remote Play over Wi-Fi, noticeable input lag may occur. For fast-paced shooters or fighting games, this can be a critical factor, making the experience uncomfortable. This technology is best suited for story-driven games with slower gameplay.
Image quality is an important aspect. You can select the resolution and frame rate in the TV app settings. The default values are 1280x720 or 1920x1080 at 60 frames per second. However, if the Wi-Fi signal is unstable, the system will automatically reduce image quality to maintain smooth gameplay.
What should I do if Remote Play doesn't find my console?
If the automatic search doesn't yield results, try manually registering the device. On the console, select "Add Device" from the Remote Play menu, which will generate a code. Enter this code in the app on the TV. Also, try rebooting your router, as the DNS cache can sometimes interfere with local device detection.
The second scenario for using a Wi-Fi connection is to play media content stored on a hard drive. PlayStation 4, directly on the screen Sony BraviaThe console can act as a media server thanks to its support for technology DLNA (Digital Living Network Alliance). This allows you to watch movies, listen to music, or view photos without using USB drives.
To activate this feature on your console, go to Settings → Media Connection Settings. Here you need to check the box next to the "Enable" item. After that, your PS4 will become visible to other devices on the local network as a media source. On the TV Sony Open the Media or Gallery app.
You should see your game console in the list of available sources. Selecting it will give you access to folders containing photos, music, and videos. It's important to note that the video file format must be supported by the TV, as the console only acts as storage in this case, with the TV handling the decoding.
| Parameter | Description | Recommendation |
|---|---|---|
| Protocol | DLNA / UPnP | Enable on the router |
| Video formats | MP4, MKV, AVI | Depends on TV codecs |
| Network speed | Local (LAN/Wi-Fi) | Minimum 50 Mbps |
| Stability | Critical for 4K | Use 5 GHz |
Using DLNA is especially convenient for viewing photos taken while gaming or listening to in-game music. However, when viewing large, high-bitrate video files, a wireless connection may not be able to handle it, and you'll experience buffering. In such cases, it's better to use a wired connection or a USB drive.
While direct streaming of a smartphone screen to a TV via a console is not a mainstream feature, many users are looking for a way to stream content from their mobile devices to the big screen using PS4 as an intermediary or Sony Bravia directly. In the context of the ecosystem Sony the most relevant technology Google Cast (Chromecast built-in), built into TVs.
Yours PS4 can act as a content source if you use streaming apps like YouTube or Twitch. Once you've started streaming on your console, you can use the "Cast" feature on your TV if the apps are synced through the same Google or manufacturer account. However, a more common scenario is when the phone connects directly to Sony Bravia.
To connect your smartphone to your TV Sony Bravia Make sure both devices are on the same Wi-Fi network. On your Android smartphone, open the Quick Settings panel and select "Cast" or "Smart View." Select your TV from the list of available devices. The image from your phone will appear on the screen.
- 📱 For iOS devices, use the Screen Mirroring feature in Control Center.
- 📺 Make sure Miracast or AirPlay 2 (for newer models) is enabled on your TV.
- 🎮 The PS4 console is not involved in image transmission in this scenario, but may be turned off to save power.
This method allows you to share photos and videos from your mobile phone with friends on the big screen while the console is idle. Transmission quality depends on the Wi-Fi signal strength and bandwidth congestion. A stable 5 GHz connection is recommended for viewing 4K videos from your phone.
⚠️ Note: Menu interfaces and function names may differ slightly depending on the TV firmware version Sony Bravia and operating system (Android TV or older platforms). If you don't find this option, check for software updates in the support section.
Even with proper setup, users may encounter connection issues. One of the most common causes is IP address conflicts or incorrect DNS settings. If the console and TV can't see each other, try setting static IP addresses in the router settings for both devices.
It's also worth checking your firewall settings. Some routers have aggressive security settings that block ports necessary for operation. Remote Play (port 9295) and DLNA. Try temporarily disabling the firewall for diagnostics. If the problem resolves, add the devices to the exceptions list.
Another common issue is using a guest Wi-Fi network. Devices connected to the guest SSID are often isolated from the main network and cannot communicate with each other. Make sure that PS4, And Sony Bravia connected to the main home network.
Finally, wireless connection PS4 to the TV Sony Bravia Opens up a wide range of possibilities for comfortable multimedia use. Whether you're streaming games via Remote Play, accessing your media library via DLNA, or casting from a mobile device, proper network setup is key to success. By following these steps, you'll be able to maximize the potential of your device.
Please remember to regularly update the software of both your console and TV. Engineers Sony We're constantly improving the stability of network connections and adding support for new codecs and protocols. Stay tuned for updates in the system settings section.
Is it possible to play PS4 games on a TV without an HDMI cable?
Technically, HDMI is required for initial setup and display of the console itself. However, the Remote Play feature allows you to stream the image to other devices (smartphones, tablets, PCs, Android TVs) over the network, creating the illusion of playing without a direct cable to the main screen, although the signal latency will be higher.
Why doesn't my TV see my PS4 in the DLNA menu?
Make sure "Enable media connection" is enabled in the console settings. Also, make sure both devices are connected to the same subnet (not a guest network) and that AP Isolation is not enabled on the router.
What is the minimum Wi-Fi speed required for Remote Play?
For comfortable gaming at 720p, a minimum speed of 15 Mbps is recommended. For 1080p and higher, a speed of 50 Mbps and the use of the 5 GHz band are recommended to minimize latency.
Does Remote Play work if the console is turned off?
Yes, if "Stay connected to the internet" and "Wake on PS4 when connected" are enabled in the PS4 power saving settings. In this mode, the console enters rest mode (flashing orange indicator) and can be woken up remotely.