A modern office or home workspace is unimaginable without wireless printing, which eliminates the need to constantly reconnect cables. Model Samsung M2070 It's a popular choice due to its reliability, but its basic configuration often lacks a built-in Wi-Fi module, causing confusion among users. Wireless printing on this device requires a USB adapter or a dedicated print server, as direct connection out of the box is impossible without additional hardware.
In this guide we will go over all the nuances of setting up wireless network for your printer, including choosing the right adapter and installing drivers. You'll learn how to overcome the limitations of the basic model and turn it into a fully-fledged network node. Critically
⚠️ Please note: Software utility interfaces may vary slightly depending on your Windows or macOS operating system version. Always check the official specifications for your specific MFP model before using it.
Checking compatibility and selecting equipment
The first step before setting up is to thoroughly check your device's technical capability for wireless connectivity. Many users mistakenly believe that the presence of a Wi-Fi logo on the box or in the series name guarantees built-in functionality, but in the line M2070 This is an option that depends on the specific model (e.g. M2070W vs. M2070). If your device doesn't have an antenna button or a wireless indicator on the front panel, you'll need an external adapter. USB Wi-Fi adapter.
Samsung (now HP Inc.) produced its own proprietary adapters, such as the model WPSN10 or WPSN11, which are guaranteed to work with these printers. Using third-party USB dongles from other manufacturers is usually ineffective, as the printer firmware does not contain drivers for them. You need to find the original accessory or a certified replacement that physically plugs into a USB port on the front or back of the device.
When choosing equipment, it's also worth paying attention to the security standards supported by your router. For stable operation, it's recommended to use encryption protocols. WPA2, since older methods like WEP may be incompatible with new firmware versions or, conversely, not supported by modern routers.
- 🖨️ Make sure you have an original Samsung USB Wi-Fi adapter or a certified equivalent.
- 📡 Check if your router supports the 802.11 b/g/n standards used by the printer.
- 🔌 Make sure the printer is turned on and ready to use (the indicator light is solid green).
Installing drivers and software
Successful network setup is impossible without pre-installed software on the computer that will act as the control node. You must download the full driver package from the official support website, as standard Windows tools often only install the basic print driver, ignoring network configuration modules. During the setup process, select the "Wireless" or "Wi-Fi" connection type, even if the printer isn't yet connected to the router.
The installer will offer you several scenarios, and here it is important to choose the setup method via USB cable For initial configuration. This is the most reliable way to transfer your network information (SSID and password) to the printer, which it can then use for standalone operation. The wizard will automatically detect the connected device and offer to transfer the Wi-Fi settings, significantly simplifying the process compared to manual configuration through the control panel.
If automatic device detection fails, try temporarily disabling your antivirus or firewall software, which may be blocking network hardware detection. Also, make sure your computer and printer are on the same subnet, although this is less critical during the initial setup via USB. After successfully transferring the settings, the program will prompt you to disconnect the USB cable, and the printer will begin searching for the wireless network.
☑️ Preparing for software installation
Setup via WPS (Wi-Fi Protected Setup)
The fastest connection method is to use technology WPS, which allows you to exchange encryption keys with the simple press of a button. This method works if your router also supports this feature, which is true for most modern models. You don't need to enter the password manually, eliminating errors when typing complex characters.
To start the process, locate the WPS button on your router and press it (sometimes you need to hold it for 2-3 seconds). Immediately after, within two minutes, press and hold the Wi-Fi button on the printer's control panel. Samsung M2070 until the indicator light starts flashing. The device will automatically detect the router and establish a secure connection.
If the printer's Wi-Fi indicator turns solid blue or green (depending on the model), the connection is successful. If the indicator continues to blink or turns orange, pairing was unsuccessful. In this case, repeat the process, ensuring that you wait within the two-minute interval and that MAC address filtering is not enabled on the router.
| Indicator status | Meaning | Action |
|---|---|---|
| Turned off | The Wi-Fi module is turned off or not installed. | Check the adapter connection |
| Slow blinking | Setup mode or network search | Run WPS or setup wizard |
| It's on constantly | Successful connection to the network | You can start printing. |
| Fast blinking | Connection or data error | Check your router password or settings |
Manual setup via USB cable
In cases where the WPS function is unavailable or not working correctly, you will have to resort to manual configuration via the software interface. Connect the printer to the computer using a USB cable and launch the program. Samsung Printer Status or Samsung Easy Wireless ConfigIn the menu, select your model and go to the wireless network settings section.
In the window that opens, you'll see a list of available wireless networks. Select your router's name (SSID) from the list. If your network isn't listed, make sure the router is broadcasting its SSID (not hidden) and operating in the 2.4 GHz band, as printers in this series typically don't support the 5 GHz frequency.
After selecting a network, the program will prompt you for a security key (Wi-Fi password). Enter it carefully, observing capitalization. After confirmation, the program will send a command to the printer, and it will attempt to connect. This method is more labor-intensive, but is often the only viable option in complex network environments.
⚠️ Important: Make sure you're entering your Wi-Fi password, not the password for your provider's account or router admin panel. These are different credentials, and an error here will result in endless connection attempts.
What should I do if my computer doesn't see my printer via USB?
Make sure the cable is secure and firmly seated. Try a different USB port, preferably one located directly on the motherboard (at the back of the system unit) rather than through a USB hub. Also, check Device Manager for any unknown devices.
Setting up a static IP address
For stable operation of the printer in the network, it is recommended to assign it static IP addressBy default, the device receives an address dynamically (via DHCP), and after a router reboot, the address may change, resulting in loss of connection to the computer. Pinning the address ensures that the path to the printer is always the same.
To do this, you need to find out the printer's current IP address. This can be done by printing a network configuration report. Press and hold the Cancel button or the Wi-Fi button (depending on the model) for a few seconds until the printer displays a technical data sheet. Look for the IP Address line, for example: 192.168.1.45.
Next, log into your router settings through a browser (usually the address 192.168.0.1 or 192.168.1.1). Find the section DHCP Reservation or Static LeaseAdd a new rule, linking your printer's MAC address (indicated in the same report) to the desired IP address. Save the settings and reboot the printer.
- 💻 Access the router's web interface through a browser.
- 🔍 Find the LAN or DHCP Server section.
- 🔗 Enter the printer's MAC address and the desired IP (e.g. 192.168.1.200).
- 💾 Save changes and reboot the device.
Solving common problems
Even if you follow the instructions correctly, you may encounter issues related to your network hardware or software. One common issue is that the printer "sees" the network, but its status in Windows remains "Offline." In this case, try removing the device from the printer list and adding it again using its IP address: Control Panel → Devices and Printers → Add a Printer → The printer I want is missing → Add via TCP/IP.
Another cause of problems could be frequency separation on the router. Some modern routers combine the 2.4 GHz and 5 GHz networks under a single name, which can confuse older devices. Try temporarily separating the networks in the router settings by giving them different names (for example, Home_2.4 and Home_5), and connect the printer to the 2.4 GHz network.
If all else fails, reset the printer's network settings. This is usually done with a button combination (for example, holding the Wi-Fi and Cancel buttons simultaneously for 10 seconds). After the reset, repeat the setup process from the beginning, starting with installing the drivers.
Why won't my Samsung 2070 printer connect to Wi-Fi?
Most often, the problem lies in incompatible encryption types (the printer may not support WPA3) or that the router only operates in 5 GHz mode. Also, check if there's a MAC address filter enabled on the router.
Can this printer be connected to a Mac?
Yes, there are AirPrint drivers or separate packages from HP/Samsung for macOS. The setup process is similar: first via USB, then transferring the Wi-Fi settings via the Mac utility.
Do you need internet access to print via Wi-Fi?
No, internet access is not required. The printer and computer must be on the same local network (connected to the same router). You can print even without internet access.