Connecting Your HP LaserJet Printer to Wi-Fi Using Your Phone: The Complete Guide (2026)

Connect the printer HP LaserJet You can connect to a wireless network via your phone in 10-15 minutes if you know the key nuances. Many users mistakenly believe that this procedure requires a computer or laptop—in fact, a smartphone Android or iOS It will do just as well. The main thing is to choose the right connection method depending on the printer model and firmware version.

Modern laser printers HP support several wireless configuration protocols: Wi-Fi Direct, HP Smart, WPS and a classic connection via the web interface. Each has its own advantages. For example, Wi-Fi Direct allows you to connect directly to the printer without a router, and HP Smart Automatically detects optimal settings. In this article, we'll cover all current methods, taking into account common errors and nuances for different operating system versions.

It is important to understand that the algorithm may differ slightly depending on the year of manufacture of the printer. Models HP LaserJet 2018-2020 printers often require preliminary activation of setup mode via a button on the device's housing, while newer devices (2021-2026) support fully wireless configuration via a mobile app. If your printer is older than 2017, Check for firmware updates on the official HP website - without them, some Wi-Fi functions may not work correctly..

1. Preparing the printer and phone for connection

Before you begin setup, make sure your printer is HP LaserJet Ready for wireless connection. To do this, follow these steps:

• 🔌 Connect the printer to a power source and turn it on. Wait until it fully boots up (the indicators should stop flashing).
• 📶 Check that there is a button on the printer body Wi-Fi or Wireless — its presence indicates support for wireless networks.
• 📱 Make sure your phone is connected to the same Wi-Fi network to which you plan to connect the printer.
• 🔄 Update your phone's operating system to the latest version (especially relevant for Android 12+ And iOS 15+).

If your printer was previously connected to a different network, you'll need to reset it. To do this:

1. Press and hold the button Wi-Fi on the printer for 5-7 seconds.
2. Wait until the wireless indicator starts blinking quickly (this indicates a reset).
3. On some models (eg, HP LaserJet Pro M426fdw) reset is performed through the menu: Settings → Network → Reset network settings.

⚠️ Attention: Printers HP LaserJet series MFP (Multifunctional devices) may have separate settings for the scanner and printer. If the scanner doesn't work via Wi-Fi after connecting, check the settings in the Scanner → Network Settings.

2. Method 1: Connecting via the HP Smart app

The most universal and reliable method is to use the official application HP SmartIt automatically detects the printer model and suggests the optimal setup algorithm. The application is available for Android (Google Play) and iOS (App Store).

Step-by-step instructions:

1. Download and install HP Smart on your phone.
2. Launch the app and click Add a printer.
3. Select Setting up a new printer.
4. Follow the on-screen instructions. The app will prompt you to either connect to the printer's temporary network (if it supports it) or Wi-Fi Direct), or enter your Wi-Fi network details manually.
5. If the printer is not detected automatically, click My printer was not found and select a model HP LaserJet manually.

Once successfully connected, the printer will appear in the list of devices. To test the connection, print a test page directly from the app.

Install the HP Smart app|Turn on Bluetooth on your phone (for some models)|Connect to the printer's temporary network (if required)|Enter the Wi-Fi password|Test the connection with a test print-->

3. Method 2: Connecting via WPS (Wi-Fi Protected Setup)

Method WPS Suitable for printers HP LaserJet, which support this technology (usually 2019 models and newer). The main advantage is that you don't need to manually enter the Wi-Fi password. However, this method has some limitations:

• ⚠️ The router must support WPS (check the presence of the button WPS on the back panel).
• ⏳ The process must be completed within 2 minutes after activating the mode on the router.
• 🔒 Some social networks are blocking WPS for security reasons.

Connection instructions:

1. On the printer, press and hold the button Wi-Fi (or Wireless) for 3 seconds until the indicator starts flashing.
2. Press the button within 2 minutes WPS on your router.
3. Wait until the Wi-Fi indicator on the printer turns solid (usually takes 30-60 seconds).

If the connection fails, repeat the process or try an alternative method. Some models HP LaserJet (For example, P1102w) require preliminary activation of the mode WPS via the menu: Settings → Wireless → WPS → Start.

Via the HP Smart app|Via WPS|Via the printer's web interface|Other method-->

4. Method 3: Manual configuration via the printer's web interface

If automatic methods fail, you can set up a manual connection through the printer's built-in web interface. This method is universal, but requires knowledge of the device's IP address.

Algorithm of actions:

1. Print the printer's network settings page:
   • Press and hold the button Cancel (or Information) within 5 seconds.
   • In the menu, select Network Configuration Report or Self Test Page.

Find the section in the printout IP Address (For example, 192.168.1.105).

On your phone, open a browser and enter this IP address into the address bar.

Log in to the web interface (default login: admin, the password is empty or admin).

Go to the section Networking → Wireless → Wireless Setup Wizard.

Select your Wi-Fi network from the list and enter the password.

If the printer does not provide an IP address (the printout shows 0.0.0.0), this means it's not connected to the network. In this case, first connect the printer to the router via cable. Ethernet or use Wi-Fi Direct for temporary connection.

What should I do if the printer's web interface doesn't open?

If your browser displays a "Page Unavailable" error, check:

1. Is the phone connected to the same network as the printer (even temporarily via Wi-Fi Direct).

2. Does your antivirus or firewall block access to local IP addresses?

3. Is the IP address entered correctly (sometimes printers use addresses like 10.0.0.x or 172.16.xx).

4. Try a different browser (for example, Firefox instead of Chrome).

5. Solving typical connection errors

Even with proper setup, problems can still arise. Below are the most common errors and how to fix them:

⚠️ Attention: If your printer HP LaserJet released before 2016, it may not support modern Wi-Fi encryption standards (e.g. WPA3). In this case, temporarily switch the router to WPA2-PSK (AES) or use connection via WPS.

6. Optimize your connection for stable operation

To avoid printing problems in the future, follow these guidelines:

• 📡 Place the printer no more than 5 meters from the router. Laser printers HP sensitive to interference at 2.4 GHz.
• 🔄 Update your printer firmware regularly via HP Smart or the official website HP.
• 📱 Turn off battery saving mode for the app on your phone HP Smart - this will prevent the connection from being broken.
• 🔒 If the printer is used in an office, configure a static IP address for it in the router settings.

To check the quality of the connection, print Network test:

1. On the printer, go to Settings → Reports → Network Test.
2. Check the parameters Signal Strength (signal level) and Link Speed (connection speed).
3. If Signal Strength below 30%, move the printer or router.

7. Alternative connection methods (if Wi-Fi doesn't work)

If you are unable to set up a wireless connection, please use alternative methods:

• 🔌 USB cableConnect the printer to your phone using an adapter. USB OTG (support needed) USB Host on the phone).
• 📶 Wi-Fi Direct: Activate the mode on the printer (button Wi-Fi Direct) and connect to its temporary network from your phone.
• 🌐 Cloud printingRegister your printer with the service HP ePrint and send documents by email.

To connect via USB OTG:

1. Buy an adapter USB OTG (For Android or iOS, depending on the phone).
2. Connect the printer to the adapter and the adapter to the phone.
3. In the appendix HP Smart select USB connection.

⚠️ Attention: Printers HP LaserJet with index w in the title (for example, P1102w) support Wi-Fi, and models without this index (for example, P1102) - USB connection only.

FAQ: Frequently asked questions about connecting your HP LaserJet to Wi-Fi

My HP LaserJet printer isn't detecting my Wi-Fi network. What should I do?

Please check the following points:

1. Make sure your router is running in 2.4 GHz mode (many printers HP do not support 5 GHz).
2. Temporarily disable MAC address filtering in your router settings.
3. Check if your network's SSID is hidden (if so, make it visible temporarily).
4. Update your printer firmware via HP Smart.

Is it possible to connect a printer to Wi-Fi without a router?

Yes, if your printer supports it. Wi-Fi Direct. Activate this mode on the printer, then on the phone connect to a network with a name like this DIRECT-xx-HP LaserJet [MODEL]Once connected, you'll be able to print directly, but your phone's internet access will be disabled.

Why does my printer connect to Wi-Fi but won't print from my phone?

Possible causes and solutions:

• 📱 The printer driver is not installed on the phone. Install it. HP Smart or download the driver from the website HP.
• 🔌 The printer has entered sleep mode. Press any button on the panel to wake it up.
• 📡 DNS issues on your router. Try manually entering Google's DNS (8.8.8.8) in the printer settings.

How do I reset Wi-Fi settings on an HP LaserJet printer?

Reset methods depending on the model:

• For most models: Press and hold the button Wi-Fi 10-15 seconds.
• For HP LaserJet Pro M426: Settings → Network → Reset network settings.
• For older models: Unplug the printer for 30 seconds, then plug it back in.

Is it possible to connect a printer to two networks at the same time?

No, printers HP LaserJet They don't support simultaneous connections to multiple Wi-Fi networks. However, you can quickly switch between networks via the printer menu or app. HP Smart.