How to connect a Canon PIXMA G3415 printer to Wi-Fi: step-by-step instructions with photos

Connecting a printer Canon PIXMA G3415 Connecting to a wireless network is a challenge faced by both novice and experienced users. Despite its apparent simplicity, the process can be complicated by incompatible Wi-Fi standards, router configuration errors, or device firmware issues. This article will help you understand all the nuances, from preparing the equipment to troubleshooting common issues.

Model G3415 It belongs to a series of multifunctional devices (MFPs) with wireless printing support, but its setup differs from that of classic office printers. There is no password entry screen; instead, a password is used. WPS method or manual installation via a PC. We'll cover both options and explain how to print with Android/iOS and why the printer may "lose" the network after rebooting the router.

Important: If your Canon G3415 If you've previously connected to a different network, first reset your network settings (instructions in the section below). This will eliminate IP address conflicts and speed up the process.

Preparing for connection: what to check before starting

Before you begin setup, make sure all system components are ready to use. Problems often arise from small issues: dead batteries in the router, outdated printer firmware, or an incorrectly entered password.

Here mandatory checklist before connecting:

Make sure your router is turned on and distributing Wi-Fi (the network indicator is green/blue)

Check that the printer Canon G3415 It's turned on and has ink (otherwise it won't respond to commands)

Connect the printer to a power outlet (do not use USB power from a PC!)

Install the cartridges and load the paper (even if you don't plan to print - this is for testing purposes)

Disable VPN on your phone/PC (it may block local device discovery)-->

Please pay special attention to Wi-Fi standard your router. Canon G3415 supports networks only 802.11b/g/n on frequency 2.4 GHzIf your router is in the mode 5 GHz or uses 802.11ac/ax (Wi-Fi 5/6), the printer won't see the network. In this case:

• 🔄 Switch your router to the mode 2.4 GHz (in the wireless network settings, select the option "2.4 GHz only" or Mixed mode).
• 🔒 If the network is hidden (SSID is not broadcast), temporarily make it visible - G3415 does not support connecting to hidden networks.
• 📶 Make sure the network signal is stable where the printer is installed (use the app Wi-Fi Analyzer to check the signal level).

Also check if it is enabled on the router client isolation mode (Client Isolation or AP Isolation). This feature blocks communication between devices on the local network, preventing a PC or phone from "seeing" the printer even after connecting.

Method 1: Connecting via WPS (the fastest method)

Technology WPS (Wi-Fi Protected Setup) Allows you to connect your printer to the network without entering a password—just press a button on the router. This method works if:

• ✅ Your router supports WPS (usually there is a button with the inscription WPS or the 🔄 icon).
• ✅ The network uses encryption WPA/WPA2-PSK (Not WPA3!).
• ✅ The printer is within range of the router (no more than 5 meters).

Connection instructions:

1. Make sure that the printer Canon G3415 the indicator is flashing Wi-Fi (blue or green). If it is not lit, press and hold the button Wi-Fi (📶) on the printer panel for 3 seconds until the indicator starts flashing.
2. For 2 minutes press the button WPS On the router. It's usually located on the back panel and labeled. Hold it for 2-3 seconds until the WPS indicator starts blinking.
3. Wait for the indicator Wi-Fi the printer won't light up continuously (This will take 30–60 seconds.) If the indicator continues to flash or goes out, repeat the process.

If the connection is successful, the printer will automatically receive an IP address from the router. You can check this by printing network report:

1. Press and hold the button Stop/Reset (⏹) on the printer 5 seconds.
2. Release the button when all indicators flash.
3. Click the button Color printing (🖨️). The printer will print a sheet with network settings, which will include the IP address.

What to do if WPS doesn't work?

If the WPS button on your router doesn't respond or your printer doesn't connect, check:

1. Is WPS disabled in the router settings? (go to the router's web interface at 192.168.0.1 or 192.168.1.1 and find the section WPS).

2. Does the router support WPS? (Some new models abandon this technology due to vulnerabilities).

3. Has the timeout expired? (You only have 2 minutes to connect after pressing WPS).

If nothing helps, use manual connection method.

Method 2: Manual connection via PC (for Windows and macOS)

If your router doesn't support WPS or you prefer to enter data manually, use this method. You'll need a computer with the drivers installed. Canon G3415.

Download and install full driver package from the official website Canon:

• 🖥️ For Windows: support page → enter model PIXMA G3415 → select your OS.
• 🍎 For macOS: use Canon IJ Network Tool (available in the App Store).

After installing the drivers:

1. Connect the printer to the PC via USB cable (included in the kit).
2. Run the utility Canon IJ Network Tool (it is installed along with the drivers).
3. In the utility window, select your printer G3415 and press Setting up the connection.
4. Select Wireless connection → Manual setup.
5. Enter network name (SSID) And password from your Wi-Fi. Make sure the characters are case-sensitive!
6. Wait for the setup to complete. The printer will reboot and connect to the network.

If the utility does not see the printer:

• 🔌 Check your USB connection (try a different cable or port).
• 🔄 Restart the printing service on your PC: click Win + R, enter services.msc, find Print Manager and restart it.
• 📥 Remove old drivers via Control Panel → Programs and Features and install them again.

WPS (button on the router)

Manual entry via PC

Connection via telephone

Haven't connected yet-->

Connecting a printer to Wi-Fi via a phone (Android/iOS)

Tune Canon G3415 You can do it without a computer—directly from your smartphone. You'll need the official app for this. Canon PRINT Inkjet/SELPHY (available in Google Play And App Store).

Step-by-step instructions:

1. Install the app and open it. Click Add a printer.
2. Select Setting up a new printer → Wireless setup.
3. Follow the on-screen instructions. The app will prompt you to:
• 📶 Connect to the printer's temporary network (its name will start with CANON_XX:G3415).
• 🔑 Enter the password for your main Wi-Fi.

Once setup is complete, the printer will reconnect to your network. Its status will appear in the app. Connected.

If your phone doesn't find the printer:

• 📵 Turn on Bluetooth on the phone - some models Canon use it for initial setup.
• 🔄 Restart the printer (turn the power off and on).
• 🚫 Make sure that the phone is turned off power saving mode - it can block network scanning.

Important: After connecting via phone, the printer may not appear in the list of devices on your PC. To fix this, add it manually via Control Panel → Devices and Printers → Add a printer, by selecting the option Add a printer by TCP/IP address (You can find out the IP from the printer's network report).

Common mistakes and their solutions

Even with the correct settings Canon G3415 Your device may not connect to Wi-Fi. Let's look at the most common issues and how to fix them.

If the printer connects but then disconnects after a while, the problem may be in the router settings:

• 🔄 Turn off the feature Wireless isolation (AP Isolation) in the router settings.
• 🕒 Increase the DHCP lease time to 24 hours (the default may be 1 hour).
• 🔄 Reflash your router if it reboots frequently (firmware updates are available on the manufacturer's website).

How to print from your phone and computer after connecting

After successful connection Canon G3415 Once you've connected to Wi-Fi, you can start printing. Let's look at the main methods.

From a computer (Windows/macOS):

1. Open the document you want to print (for example, in Word or PDF reader).
2. Click Ctrl + P (or File → Print).
3. Select your printer Canon G3415 from the list.
4. Set up your print options (number of copies, orientation, etc.) and click Seal.

From your phone (Android/iOS):

• 📄 Use the app Canon PRINT: Open a document or photo in the gallery → Share → Seal → select a printer.
• 🌐 To print web pages: open your browser → Menu → Print → select Canon G3415.
• 📧 To print letters: open the letter in your email client → Menu → Print.

If your printer does not appear in the list of devices:

• 🔄 Restart your printer and computer/phone.
• 📥 Install the latest drivers from the website Canon.
• 🔧 Manually add the printer by IP address (you can find it in the network report).

To print from iPhone or iPad you can also use the function AirPrint (if supported by your model Canon). To do this:

1. Make sure the printer and device Apple connected to the same network.
2. Open the document → click Share → Seal.
3. Select Canon G3415 from the list of printers.

Resetting the printer's network settings

If the printer was previously connected to a different network or the settings have become corrupted, perform a reset. This will return all Wi-Fi settings to factory defaults.

Instructions:

1. Make sure the printer is turned on.
2. Press and hold the button Wi-Fi (📶) on the printer panel 10-15 secondsuntil the indicator starts flashing orange.
3. Release the button. Indicator Wi-Fi should blink blue - this means that the settings have been reset.
4. You can now reconnect the printer to the network (see sections above).

After resetting, the printer will lose all saved networks, including the current one. If you forgot your Wi-Fi password, find it:

• 🖥️ On Windows: Control Panel → Network and Internet → Network and Sharing Center → Wireless Network → Properties → Security (check Show entered characters).
• 🍎 On macOS: open Bunch of keys, find the network name and double-click on it.
• 📱 On Android: Go to Wi-Fi settings → select network → Share (you will need to enter your device PIN).

Additional settings for stable operation

To Canon G3415 worked without failures, configure the router and printer optimally.

Router optimization:

• 📶 Select a fixed channel 2.4 GHz (for example, 6th) instead Auto - this will reduce interference.
• 🔒 Set up encryption WPA2-PSK (AES) - it works most stably with printers.
• 🔄 Turn off the feature Band Steering (if any) to prevent the printer from trying to connect to 5GHz.

Printer settings:

• 📄 Turn on Economy Print Mode in the driver if the ink runs out too quickly.
• 🔄 Update your printer firmware via Canon IJ Network Tool (chapter Software update).
• 📶 If the printer is far from the router, use Wi-Fi repeater to enhance the signal.

To check the quality of the connection, print test sheet:

1. Press and hold the button Black and white printing (⚪) 5 seconds.
2. Release the button when the indicators flash.
3. The printer will print a test page with information about the status of the cartridges and the network connection.

FAQ: Frequently Asked Questions about Connecting the Canon G3415

Is it possible to connect a printer to Wi-Fi without a computer?

Yes, there are two ways:

1. Through WPS (if the router supports this function).
2. Through mobile application Canon PRINT (For Android And iOS).

In both cases, a computer is not required.

The printer is connected to Wi-Fi, but it won't print from my phone. What should I do?

Check the following:

• The phone and printer are connected to one Wi-Fi network.
• In the appendix Canon PRINT the printer is displayed as Connected.
• It's turned off on the phone. power saving mode for the application Canon PRINT.
• The problem may be in router firewall - temporarily disable it.

If nothing helps, reinstall the application Canon PRINT.

How to find out the printer's IP address after connection?

There are three ways:

1. Print it out network report: press and hold Stop/Reset 5 seconds, then press Color printing.
2. Check the list of devices in router web interface (chapter DHCP or Connected devices).
3. Use the utility Canon IJ Network Tool on a PC - it will show the printer's IP.

The printer connects to Wi-Fi, but after a day it disconnects again. What's wrong?

This is a typical problem associated with:

• DHCP lease: The router may assign a new IP address to the printer, causing the connection to break. Solution: Assign a new IP address to the printer. static IP in the router settings.
• Energy saving routerSome routers disable Wi-Fi in sleep mode. Solution: Disable this feature.
• Interference from other devicesMicrowaves, cordless phones, and nearby networks can cause interference. Solution: Change your Wi-Fi channel to 1, 6, or 11.

Also check if the printer is overheating - if it is overheated, it may shut down.

Is it possible to connect Canon G3415 to a public network (in a cafe, hotel)?

Technically yes, but there are some nuances:

• 🔒 Most social networks use portal authentication (you need to enter your login/password in the browser). Canon G3415 does not support this type of connection.
• 📡 If the network is open (no password), the printer will connect, but printing may be blocked by the network administrator.
• 🖥️ Some hotels require you to register your device's MAC address. Find out your printer's MAC address (it's listed on the network report) and provide it to your administrator.

The best option is to use mobile hotspot (share Wi-Fi from your phone).