Wireless printing has long ceased to be a luxury and has become a necessity for the modern office or home office. Model HP LaserJet Pro M135w It's deservedly popular due to its compact size and ability to operate without unnecessary wires. However, initial Wi-Fi connection setup often presents difficulties for users accustomed to simple USB cables.
Integrating a device into a local network requires a sequential process, which we'll cover in detail. It's important to understand that for successful synchronization, the router must be stable and the computer drivers must be up-to-date. We'll cover several proven methods, including using a USB cable for initial network settings transfer.
In this article, you'll find not only step-by-step instructions, but also solutions to common problems faced by owners of this equipment. Proper setup wireless module This allows you to print documents from any device within the network range, significantly increasing mobility and ease of use.
Preparing equipment and checking the network
Before beginning the software setup, you need to ensure the hardware is physically ready. Make sure the printer is plugged in and the power indicator is solid. The router should also be running and broadcasting the network to which you plan to connect the device.
Particular attention should be paid to the frequency range. Model HP LaserJet 135w supports the standard 802.11b/g/n, which means it operates exclusively in the 2.4 GHz band. If your router broadcasts both the 5 GHz and 2.4 GHz bands under the same name, device detection conflicts may occur.
⚠️ Note: If your router uses Band Steering, temporarily separate the networks into different SSIDs or force the router to operate only on 2.4 GHz during setup.
Also, make sure VPN and proxy servers are disabled on the computer or smartphone you'll be using for setup. These tools can block local network scanning for the printer, leading to installation errors.
For the cable method, you'll need a high-quality USB Type AB cable. Avoid using cables that are too long (more than 1.5 meters), as this can result in signal loss when transmitting configuration data.
Setup method via USB cable (Smart Install)
The most reliable way to perform initial configuration is using a cable. This method automatically transfers your Wi-Fi router settings to the printer's memory. First, connect HP LaserJet 135w to the computer via USB port.
Once connected, the system may automatically launch the installation wizard. If this doesn't happen, visit the manufacturer's official website and download the full driver package. HP Smart or HP LaserJet Pro M135 MFPRun the installation file.
During installation, the program will detect the connected device. When prompted for the connection type, select "Wireless Network Connection." The program will automatically retrieve your current Wi-Fi network parameters (SSID and password) and send them to the printer.
☑️ Check before starting setup
Once the data is transferred, the wireless indicator on the printer's control panel should turn blue. At this point, you can disconnect the USB cable, and the device is ready for wireless communication.
Using WPS technology for fast synchronization
If your router has a button WPS setup takes just a couple of minutes and requires no password. This method is ideal if you don't have a USB cable or a computer with drivers handy.
On the printer control panel, locate the button with an antenna or Wi-Fi icon. Press and hold it for 3-5 seconds until the indicator light starts blinking. This activates the WPS signal search mode.
Within two minutes, press the WPS button on your router. It's usually located on the back panel and may require a short or long press, depending on the router model.
The devices will exchange encrypted keys, and the printer will automatically gain access to the network. The Wi-Fi indicator on the device will stop flashing and remain solid, indicating a successful connection.
What to do if WPS doesn't work?
WPS may be disabled in your router settings for security reasons. Go to your router's web interface (usually 192.168.0.1 or 192.168.1.1) and check the Wireless Security section. This method also won't work if your router uses older WEP encryption, which the HP LaserJet 135w may not support in WPS mode.
Manual setup via the printer control panel
If automatic methods don't work, you can enter network settings manually using the buttons on the device. Press the wireless button to enter the network menu.
Using the navigation buttons (arrows), find "Setup" or "Wireless Menu." Select "Wireless Setup Wizard." The printer will begin scanning for available networks.
Find your network name (SSID) in the list. If the network is hidden, select "Enter network name" and enter the SSID manually using the on-screen alphanumeric keypad or key combination.
| Parameter | Default value | Recommended action |
|---|---|---|
| Wi-Fi mode | On | Activate via menu |
| Range | 2.4 GHz | Make sure your router supports it |
| Security | WPA2-PSK | Use this particular type |
| IP address | Auto (DHCP) | Leave it automatic |
After selecting the network, you'll be asked to enter the password. This is the most time-consuming step, as you navigate through the symbols using the arrow keys. Be careful with capitalization.
Installing drivers and software
Once the printer is connected to the router, you need to install the drivers on your computer. Without them, the operating system won't be able to correctly interpret print commands.
Go to "Devices and Printers" in the Windows Control Panel. Click "Add a printer." The system will begin searching for available devices on the network.
When it appears on the list HP LaserJet Pro M135w, select it. Windows will attempt to automatically find and install drivers from the Update Center. This process may take a few minutes.
If the automatic search doesn't yield results, use the previously downloaded installation file. When selecting the connection type, select "Network connection" and select your printer from the list of IP addresses found.
Setting up printing from smartphones and tablets
Modern users often need to print documents directly from mobile devices. HP LaserJet 135w the app is perfect HP Smart, available for iOS and Android.
Install the app and sign in to your HP account. Click "Add a printer" and follow the on-screen instructions. The app will automatically find the device on the same Wi-Fi network as your phone.
Technology is also supported Wi-Fi DirectIt allows you to connect to the printer directly, without a router. Print a configuration report to find the printer's network name and password for a direct connection.
⚠️ Please note: When using Wi-Fi Direct, printing speed may be lower than through a router, and the Internet on your phone will not work while printing, as the device will switch to a direct connection to the printer.
For owners of Apple devices, the technology is relevant AirPrintIt doesn't require installing any additional drivers. The main requirement is that the iPhone and printer must be on the same subnet.
Diagnosing and resolving connection problems
Sometimes the setup process doesn't go smoothly. If the Wi-Fi indicator is blinking, it means the printer is trying to connect but can't. Check that the password you entered is correct.
A common issue is MAC address filtering on the router. If you have a whitelist enabled, add the printer's MAC address to the router settings. The address can be found on the sticker on the back of the device or in the configuration report.
Make sure AP client isolation is not enabled on your router. This feature prevents devices on the same Wi-Fi network from seeing each other, making printing impossible.
If all else fails, try temporarily disabling your antivirus and firewall software on your computer while installing the drivers, as they may be blocking ports required for discovery protocols.
Why doesn't the printer see the 5 GHz network?
The HP LaserJet 135w's Wi-Fi module doesn't physically support the 5 GHz frequency. It only operates in the 2.4 GHz band. You'll need to enable this frequency in your router settings or use a guest network that operates at 2.4 GHz.
How to find out the IP address of a printer?
Press the wireless button on the printer's control panel to view the status. Then press the "Report" button (the icon of a sheet with the letter "i" on it). The network configuration report will show the device's current IP address.
Is it possible to connect a printer to a hidden network?
Yes, this is possible through the menu "Setup" -> "Wireless" -> "Setup Wizard." You will need to manually enter the exact network name (SSID) and password, as the automatic search does not reveal hidden networks.