Modern multifunctional devices Epson L355 Wireless printers offer a wide range of printing, scanning, and copying capabilities, but they require a proper local network connection to function properly. A wireless connection allows you to print documents from multiple computers and mobile devices simultaneously, eliminating the need to run cables across the room. The initial setup process may seem complicated for beginners, but by following a clear step-by-step guide, you can activate the Wi-Fi module in just a few minutes.
Before beginning the procedure, make sure your router is working properly and has an internet signal, and your printer is fully charged and ready to use. Knowing your wireless network password is crucial, as authorization for the device is impossible without it. If you're using complex corporate networks or special security protocols, setup may require additional steps, which we'll discuss below.
In this article, we'll cover all available connection methods, including automatic setup via WPS and manual network settings via the control panel. You'll learn how to use the technology. Wi-Fi Direct For printing from mobile devices without a router, as well as how to fix common issues when the printer stops detecting the network. Equipment readiness and signal stability are key factors for successfully integrating the device into your digital home.
Preparing equipment and checking the network
The first step to successfully integrating a printer into a network is proper preparation. hardware. Make sure the device Epson L355 Connect the printer to a power source and turn it on using the power button. The indicators on the control panel should light up, indicating the system is ready for operation. It is not recommended to configure the printer while it is in deep sleep or power saving mode, so wake it up if necessary.
A critical step is to check the settings of your wireless router. Printers of the series L from Epson, like most budget models, only supports the 2.4 GHz frequency range. If your router broadcasts a 5 GHz network, the device simply won't see the access point. It's also worth making sure that MAC address filtering isn't enabled on your router, which could block new devices.
⚠️ Important: If you're using a dual-band router with the same network name (SSID) for both 2.4 GHz and 5 GHz, the printer may attempt to connect to an unsupported frequency. In this case, we recommend temporarily separating the network names in your router settings or creating a guest network using only the 2.4 GHz frequency.
For ease of setup, please have your network information ready. You will need the exact network name (SSID) and password. Pay attention to the case and special characters, as even a single error will prevent you from connecting. If you don't know the password, you can find it in your provider's account or on a sticker on the router.
☑️ Ready to customize
Automatic connection via WPS
The fastest way to establish a connection between the printer and the router is to use technology WPS (Wi-Fi Protected Setup). This method allows you to transfer network security settings automatically, without having to manually enter a complex password on the device's small screen or via a computer. To get started, make sure your router supports WPS, which is true for the vast majority of modern models.
On the printer control panel Epson L355 Find the button with the Wi-Fi icon or the separate WPS button if it's located separately. Press and hold this button for 3-5 seconds until the wireless indicator starts blinking. This puts the printer into pairing mode for the router.
Within two minutes of activating the printer's WPS mode, press the WPS button on your router. It's usually located on the back of the device, along with the LAN ports and reset button. After pressing the button, the LEDs on both devices should begin flashing faster, indicating the encryption key exchange process.
- 🔹 Press the WPS button on the printer Epson L355 and hold for 3 seconds.
- 🔹 Within 2 minutes, press the same button on your router.
- 🔹 Wait until the Wi-Fi indicator on the printer stops blinking and turns solid.
- 🔹 Check your connection status by printing a network status report.
If the connection is successful, the wireless network indicator on the printer's control panel will be solid green or blue. If the indicator continues to blink or remains orange, the connection has failed. This may indicate a timeout, or the WPS feature on the router is disabled in the security settings.
What to do if WPS doesn't work?
WPS may be disabled in your router settings for security reasons. In this case, log in to the router's web interface (usually at 192.168.0.1 or 192.168.1.1) and find the Wireless or Wi-Fi section to enable WPS. It's also possible that your ISP is blocking this feature on the router's hardware.
Setting up via the printer control panel
If automatic connection fails, you can perform manual configuration using the navigation buttons on the device itself. This method is more reliable in complex network environments that require precise configuration. To begin, access the settings menu by clicking the corresponding button on the control panel. Epson L355.
Use the navigation arrows to navigate to the section Wi-Fi Setup or Network settings. Select an item Wi-Fi Setup Wizard (Wi-Fi Setup Wizard). The printer will begin searching for available wireless networks within range. In the list that appears, find your network name (SSID) and press the confirmation button (usually the OK button or a colored Start button).
The next screen will ask you to enter your password. Use the navigation buttons to select symbols and numbers. This process may seem tedious, but it is necessary for authorization devices on a secure network. After entering the password, confirm the action. The printer will attempt to connect, and if successful, a connection confirmation message will appear on the screen.
⚠️ Important: When entering your password, pay close attention to the capitalization. The system won't display the entered characters in clear text for security reasons, so it's easy to make a mistake. If the connection fails the first time, try entering the password again.
After a successful connection, it's recommended to check the signal quality. You can find information about the Wi-Fi signal strength in the control panel. If the signal strength is too low, you may need to move the router closer to the printer or use a Wi-Fi repeater to strengthen the signal in the area where the MFP is installed.
Using Wi-Fi Direct technology
Technology Wi-Fi Direct Allows you to connect mobile devices and laptops directly to the printer, without a wireless router. This is ideal for printing photos from your smartphone when visiting someone or in an office where network access is limited. Epson L355 becomes an access point itself, creating its own mini-network.
To activate this mode, press and hold the Wi-Fi button on the control panel until the indicators start flashing in a specific pattern, or select Wi-Fi Direct in the network settings menu. The network name (usually starting with DIRECT-EPSON) and the connection password will be displayed on the printer screen or on the printed network report.
On your smartphone or tablet, open Wi-Fi settings, find the printer's network, and enter the password. Once connected, you can print documents through the app. Epson iPrint or standard operating system tools.
| Parameter | Regular Wi-Fi | Wi-Fi Direct |
|---|---|---|
| Presence of a router | Required | Not required |
| Internet access | Yes (via router) | No (usually) |
| Number of users | Multiplayer | Limited (1-4 devices) |
| Speed of setup | Average | High |
Usage Wi-Fi Direct connection This is especially convenient when you need to quickly print a document from your phone without connecting it to the main home network. However, for regular work in the office or at home, a traditional router connection is preferable, ensuring stability and simultaneous printer availability for all family members.
Installing drivers and software
Once the printer is connected to the network, you need to install software on your computer so that the operating system can interact correctly with the device. For the model Epson L355 It is important to use a complete driver package that includes not only basic printing functions but also utilities for scanning and monitoring ink levels.
Download the installation file from the manufacturer's official website. When launching the installer, select the "Wireless" or "Wi-Fi" connection type. The program will automatically scan the network and find your printer. IP addressIf the printer is found, follow the on-screen instructions to complete the driver installation.
During the installation process, you may be asked to confirm the default use of the device. The system will also prompt you to register the product to receive updates and an extended warranty. It is recommended that you agree to install all components, including Epson Scan And Epson Event Manager, for full operation of all MFP functions.
- 🖨️ Run the driver installation file downloaded from the official website.
- 🖨️ Select the "Wireless Network Connection" option.
- 🖨️ Wait until the program detects Epson L355 in the list of available devices.
- 🖨️ Complete the installation and try printing a test page.
If the automatic search fails, you can add the printer manually by entering its IP address. This address can be found by printing a network status report from the printer's control panel. Enter the IP address in the appropriate field in the installer, and the computer will be able to find the device even in complex network configurations.
Diagnosing and resolving connection problems
Even with proper configuration, situations may arise where the printer loses connection to the network or stops responding. One common cause is the printer's IP address being changed by the router. To avoid this, it is recommended to assign a static IP address to your printer's MAC address in the router settings. Epson L355.
Another common issue is incompatibility of security standards. If the router uses an outdated encryption protocol or, conversely, a very new one (for example, only WPA3), the printer may not connect. In such cases, try temporarily changing the router's security settings to WPA2-PSK (AES), which is the most universal standard.
⚠️ Note: Router interfaces and printer firmware versions are subject to update. If the steps described do not apply to your situation, please refer to your router documentation or the Epson support website for up-to-date protocol compatibility information.
To reset the printer's network settings to factory defaults, you can use a combination of buttons on the control panel. Typically, this involves simultaneously pressing the Wi-Fi button and the Cancel button (the triangle in a circle) for a few seconds. After the reset, you'll need to repeat the network setup procedure.
Why doesn't the printer see the Wi-Fi network?
The most common cause is the frequency band. Make sure your router is broadcasting a 2.4 GHz network. Also, check if the network name (SSID) is hidden in the router settings—Epson printers often don't detect hidden networks. Another possible cause is an overly complex network name or password containing special characters that the printer might interpret incorrectly.
How to find the IP address of the Epson L355 printer?
The easiest way is to print a network status report. To do this, press and hold the network button (or the i button) on the control panel for a few seconds. The printed report will show the device's current IP address, which will look like 192.168.xx, in the Wi-Fi section.
Can Epson L355 be connected to a 5GHz network?
No, the Epson L355 model is equipped with a Wi-Fi module that only supports the 802.11 b/g/n standard in the 2.4 GHz band. Connecting to 5 GHz networks (ac/ax standards) is technically impossible. However, if your router is dual-band, the printer will successfully connect to a 2.4 GHz network, even if it shares the same name as a 5 GHz network.