How to Connect an HP Laser MFP 135w Printer to Wi-Fi: 4 Proven Methods + Troubleshooting

Connecting a printer HP Laser MFP 135w Connecting to a wireless network is a challenge faced by both novice and experienced users. Despite the compactness and versatility of this model, network setup can sometimes be challenging: the router isn't visible in the list, the password isn't accepted, or the connection keeps dropping. In this article, we'll cover the process. all current connection methods - from the standard method through the control panel to alternative options using HP Smart And WPS mode.

Peculiarity HP Laser MFP 135w in that it supports both traditional connection via Wi-Fi Direct, as well as integration into a local network for shared use. We'll not only show step-by-step instructions, but also explain Why might the printer not connect? to the network, even if you've done everything correctly. At the end of the article, you'll find a FAQ with answers to frequently asked questions and a compatibility chart for different standards. Wi-Fi.

If you have already tried to connect and encountered an error, skip the introductory part and go straight to the section Problem Solving. They are collected there. unique tips, which are not in the official documentation HP.

Preparing for connection: what you need to do before setting up

Before you begin setting up, make sure the following basic requirements are met:

• 📶 The router is turned on and distributes Wi-Fi in the range 2.4 GHz (the printer does not support 5 GHz).
• 🔌 HP Laser MFP 135w connected to the power grid and within the network's range (no further than 5–7 meters from the router).
• 📱 You have a smartphone/tablet with the app at hand HP Smart or computer with printer drivers.
• 🔐 Do you know? exact Wi-Fi password (If you forgot, look at the router sticker or in the web interface).

If your router is working in dual-band mode (simultaneously 2.4 GHz And 5 GHz under one name), temporarily disable 5 GHz in the settings. HP Laser MFP 135w It can't automatically select a range and may freeze when trying to connect. Here's how:

1. Go to the router's web interface (usually at 192.168.0.1 or 192.168.1.1).
2. Find the section Wireless network (Wi-Fi) → 5 GHz settings.
3. Turn off the broadcast 5 GHz or change the network name (SSID) for this range.

Method 1: Connecting via the printer control panel

This basic method, which recommends HPIt doesn't require any additional devices—just the printer itself and access to its menu.

Algorithm of actions:

1. Turn on the printer and wait until it is fully loaded (the ready indicator should be green).
2. On the control panel, press the button Wireless (antenna icon) or go to the menu Settings → Net → Wireless communication.
3. Select an item Wi-Fi Setup Wizard (Wi-Fi Setup Wizard).
4. The printer will begin scanning for networks. Find your network in the list and select it.
5. Enter your password using the arrows on the panel (case sensitive!). To confirm, press OK.
6. Wait for the message Connected or Connected.

If your network doesn't appear in the list, try:

• 🔄 Restart the router and printer.
• 📡 Reduce the distance between devices.
• 🔒 Make sure the network is not hidden (the checkbox should be unchecked in the router settings) Hide SSID).

The network is broadcasting at 2.4 GHz|The printer is within range|The SSID is not hidden|The password was entered correctly-->

Important: printer HP Laser MFP 135w does not support encrypted networks WPA3 - only WPA2-PSK (AES)If your router uses WPA3, change the encryption type in the settings to WPA2.

Method 2: Quick connection via WPS

If your router supports WPS technology (Push-button or PIN code) - this method will save time. It's suitable for networks that don't require manual password entry.

Instructions:

1. Make sure the indicator light on the router is on. WPS (or the button is active).
2. On the printer HP Laser MFP 135w go to Settings → Net → Wi-Fi Protected Setup (WPS).
3. Select Press the button (Push Button).
4. For 2 minutes press the physical button WPS on the router.
5. Wait for the successful connection message to appear on the printer screen.

If connection failed:

• ⏱️ Please try again - you have only 120 seconds after activating WPS on the printer.
• 🔄 Restart your router and printer.
• 🔧 Check if WPS is enabled in your router settings (sometimes it is disabled by default).

Method 3: Connecting via the HP Smart app

Mobile application HP Smart (available for Android And iOS) simplifies setup, especially if you don't want to enter a password through the printer's small screen. The app also lets you print from your phone and check ink levels.

Step-by-step instructions:

1. Download and install HP Smart from Google Play or App Store.
2. Turn on Bluetooth on your phone and allow the app to access your location (necessary to search for printers).
3. Launch HP Smart and press Add a printer.
4. The application will prompt you to select a connection method. Select Setting up a new printer.
5. Follow the instructions on the screen: the application will find it itself HP Laser MFP 135w and will offer to connect to its temporary network HP-Print-XX-Setup.
6. Once connected to the temporary network, select your primary network Wi-Fi-network and enter the password.
7. Wait for the setup to complete (may take up to 3 minutes).

If the application does not find the printer:

• 📱 Restart HP Smart and turn on/off Bluetooth.
• 🔄 Make sure the printer is turned on and located close to your phone (no further than 1–2 meters).
• 📋 Check that the error indicator on the printer is not lit (if it is, restart it).

Method 4: Connecting via USB (Alternative Method)

If wireless methods don't work, you can temporarily connect the printer to your computer via USB and set up Wi-Fi via driver. This method is suitable for Windows And macOS.

Instructions for Windows:

1. Connect the printer to the PC via USB-cable (included).
2. Download and install the driver from official HP website (select your OS).
3. After installation, open Control Panel → Devices and printers.
4. Find HP Laser MFP 135w, right click and select Printer properties.
5. Go to the tab Ports and add a new port of type Standard TCP/IP Port.
6. Enter the IP address of the printer (you can find out by printing Network configuration page from the control panel).
7. Save settings and disable USB-cable. The printer must connect to Wi-Fi automatically.

For macOS:

1. Connect the printer via USB and install the driver from the website HP.
2. Open System Preferences → Printers and scanners.
3. Click +, select HP Laser MFP 135w and add it.
4. On the menu Parameters and materials select Driver settings → Wireless communication.
5. Follow the setup wizard Wi-Fi.

Troubleshooting: Why Your Printer Won't Connect to Wi-Fi

Even with the correct settings HP Laser MFP 135w may refuse to connect. Let's consider the most common mistakes and ways to eliminate them.

If the printer connects to the network, but does not print from computer:

• 🖨️ Check if the printer is installed as default device in the settings Windows/macOS.
• 🌐 Make sure your computer and printer are in one network.
• 🔧 Update your printer driver to the latest version.

⚠️ Attention: If your router uses non-standard DNS settings (For example, Cloudflare or Google DNS), the printer may not connect. Reset the DNS settings to default values ​​(usually the router's IP address).

Additional settings after connection

After successfully connecting to Wi-Fi It is recommended to perform several actions for stable operation:

1. Update your printer firmware:
   • Go to Settings → Services → Software update.
   • If an update is available, confirm the installation.
2. Set up sharing (for the office):
   • In the router's web interface, pin IP address printer (for example, 192.168.0.100).
   • Install the printer on all computers on the network via IP address.