Setting up a wireless connection for office equipment often turns into a real quest, especially when it comes to a series HP Laser MFP 130Many users encounter problems with their device not detecting the router or with drivers installing incorrectly, interrupting the process midway. In this guide, we'll cover all the setup details. Wi-Fi Direct and connections via a standard infrastructure network.
Modern demands for speed dictate their own rules: printing from a mobile device or scanning to the cloud without unnecessary wires are becoming a necessity. Model range HP Laser MFP 133, 135, and 137 has a built-in wireless communication module, which, however, requires proper initial configuration. Critical: Initial network setup is only possible via a USB cable or the WPS method; direct creation of a Wi-Fi network from the printer's control panel without a computer is not possible.
You don't need to be a system administrator to handle this task. We've prepared a detailed step-by-step guide covering all popular operating systems and usage scenarios. Let's figure out how to turn your MFP into a fully-fledged network node accessible to everyone in your family or office.
Equipment preparation and compatibility testing
Before proceeding with the software, you need to ensure that the hardware is physically ready. Make sure your router broadcasts a signal at 2.4 GHz, as the series HP Laser MFP 130 Doesn't support modern 5 GHz networks. This is a common error that causes the printer to simply "not see" the access point.
It's also worth checking whether the MFP is in a strong signal area. If the device is located in a metal cabinet or in a far corner of the building, the connection will be less stable. For initial setup, you'll need a computer with an OS. Windows or macOS, as well as a working USB cable type AB.
Pay attention to the indicators on the control panel. A horizontally blinking wireless indicator usually indicates setup mode or a connection error. If the indicator is solid, the device is already connected to a network and may need to be reset.
⚠️ Attention: Before starting the installation, we strongly recommend disabling VPN services and corporate proxy servers on your computer. They may block the driver installer from finding the printer on the local network.
WPS method: the fastest way to connect
If your router supports the technology WPS (Wi-Fi Protected Setup), the connection process takes less than a minute. This method is ideal for those who don't want to bother with searching for networks and entering passwords. There should be a corresponding button or software switch on the back of the router or in its web interface.
To start the process, press and hold the wireless button on the printer panel. HP Laser MFP 130 For a few seconds, until the indicator light starts flashing. Immediately after, press the WPS button on the router. The devices will automatically exchange encryption keys.
- 🔘 Press the WPS button on the router (physically or via the web interface).
- 🔘 On the MFP panel, press and hold the Wi-Fi button until the indicator starts blinking.
- 🔘 Wait for the indicator to switch to constant lighting mode.
- 🔘 Check the printout of the network configuration report page.
A successful connection is confirmed by a change in the blinking pattern of the indicator: it should turn blue and then stop blinking. If the blinking continues for more than two minutes, the handshake failed, and you should repeat the procedure, moving closer to the router.
Setup via USB cable and software
The most reliable way to ensure all necessary components are installed is to use installation software. You'll need to download the latest driver from the official website. HP Support. Enter your device model (e.g. HP Laser MFP 135w) in the search bar on the manufacturer's website.
Run the downloaded file and follow the on-screen instructions. When the installer prompts you to select a connection type, select "Wireless Connection." The program will then prompt you to connect a USB cable. This is when the network settings are transferred from your computer to the printer.
☑️ Checklist before connecting USB
During the setup process, the program may offer to update the device firmware. It is recommended to agree, as new software versions often contain fixes for security vulnerabilities and improve the stability of the Wi-Fi module. After completing the setup, the program will prompt you to disconnect the USB cable.
| Stage | User action | Indicator reaction |
|---|---|---|
| 1. Start | Launching the installer | The Wi-Fi indicator is off |
| 2. Selecting a type | Select "Wireless" | The indicator is flashing |
| 3. USB connection | Cable connection upon request | The indicator lights up steadily |
| 4. Completion | Disconnecting the cable | The indicator is on (the network is active) |
⚠️ Attention: Don't connect the USB cable until the setup program explicitly asks for it. Connecting it too early may trigger direct printing (USB host) mode, preventing automatic Wi-Fi setup.
Using Wi-Fi Direct technology
Function Wi-Fi Direct Allows you to connect mobile devices and laptops directly to the printer, bypassing your home network and router. This is especially convenient when you need to quickly print a document from a guest's phone or if your main router is temporarily unavailable.
To activate this mode, press the Wi-Fi Direct button on the control panel (or the combination of buttons specified in the instructions for your specific model) 133/135/137). The printer will create its own network, the name of which usually contains the word Direct and the device model.
To connect, find this network in the list of available Wi-Fi networks on your smartphone or tablet. The default password is printed on the information sticker on the device or can be found on the printed report page. It's usually an 8-digit combination.
What is the difference between regular Wi-Fi and Wi-Fi Direct?
With a standard connection, the printer and phone are on the same local network via a router, giving both devices internet access. With Wi-Fi Direct, the phone connects directly to the printer, at which point the phone may lose internet access as it switches to a direct connection to the MFP.
It's worth remembering that when Wi-Fi Direct is active, data transfer speeds may be lower than through a full-fledged router. Simultaneous operation in client mode (connected to a router) and access point (Wi-Fi Direct) is possible, but may place additional load on the module.
Mobile Printing: HP Smart and Other Apps
HP has developed an application for smartphone and tablet owners. HP SmartIt is available in Google Play And Apple App StoreAfter installing the app and adding a printer (click the "+" or "Add Printer" button), you'll gain access to advanced functionality.
The app not only allows you to print documents and photos, but also scan documents directly to your phone, save them to the cloud, or send them via email. Also, through HP Smart You can monitor toner levels and receive notifications when the cartridge needs to be replaced.
- 📱 Download the HP Smart app to your mobile device.
- 📱 Make sure your phone and printer are connected to the same Wi-Fi network.
- 📱 Click "Add printer" and select your model from the list.
- 📱 If necessary, sign in to your HP account to access cloud features.
If the automatic search does not produce results, try using the mode Bluetooth for initial pairing (if supported by the model) or select "Printer not specified" to manually enter the IP address. The app will also prompt you to complete the wireless network setup if the printer hasn't yet been connected to the router.
Diagnosing and solving common problems
Even if you follow all the instructions, technical difficulties may arise. Often, the problem lies in the router's security settings. Make sure that filtering is not enabled on the router. MAC addresses, which can block new devices. It's also worth checking to see if the DHCP address pool is full.
If your printer loses its network connection after changing the Wi-Fi password or replacing the router, you need to reset the network settings. This typically requires holding down the wireless button and the cancel button (the cross) simultaneously for a few seconds on the MFP panel.
If your computer sees the printer but can't print a document, try removing the device from the "Printers & Scanners" list in Windows and then adding it again. Clearing the print queue and restarting the print spooler service can sometimes help.
⚠️ Attention: Router interfaces and printer firmware versions are constantly updated. If the steps described don't match your screen, please refer to the router manufacturer's documentation or use the "Auto-Fix" feature in the HP Smart app.
Frequently Asked Questions (FAQ)
Can the HP Laser MFP 130 be connected to a 5GHz network?
No, this printer series is equipped with a Wi-Fi module that operates exclusively in the 2.4 GHz band. If your router only broadcasts 5 GHz, the printer will not see the network. You will need to enable 2.4 GHz support in your router settings or create a guest network in this band.
What should I do if the Wi-Fi light keeps blinking?
A blinking light means the printer is trying to connect but is unable to. Check that the Wi-Fi password you entered is correct. If the password is correct, try temporarily disabling security macros on your router or moving the printer closer to the signal source for setup.
Is a USB cable required for continuous operation?
No, the USB cable is only required during the initial network setup. Once the printer has received Wi-Fi settings from the computer, the cable can be disconnected, and the device will operate completely autonomously over the wireless network.
How to find out the IP address of a printer?
To obtain a network configuration report, press and hold the "Information" (i) button on the control panel for 3 seconds. The printer will print a page with the device's current IP address listed in the Wireless section.