Many users are faced with the need to quickly print documents or photos directly from their smartphone, and the model HP Deskjet 2130 It's one of the most popular budget solutions for the home. However, despite the lack of a built-in wireless module in the basic configuration, there is an effective way to establish communication between the gadget and the printer. Modern technologies make it possible to bypass hardware limitations using software network emulators or a direct Wi-Fi connection.
In this article, we'll walk you through the steps to turn your desktop printer into a mobile printing center. You don't need to be a networking expert to set it up. Simply follow the instructions and have a WPS-enabled router or a smartphone with the app installed. HP Smart.
The setup process may vary depending on your mobile device's operating system. We'll cover the platform-specific details. Android And iOSSo that every user can find a solution for their specific situation. It's important to understand that connection stability directly depends on the router's signal quality and the correctness of the network parameters.
Equipment preparation and compatibility testing
Before starting any manipulations, you must ensure that all system components are ready for operation. HP Deskjet 2130 Printer The printer must be plugged into a power outlet and the cartridges installed and configured. Empty paper tray or flashing error indicators may interrupt the connection process at the initial stage.
Your router should broadcast at 2.4 GHz, as many budget printer models don't support the 5 GHz standard. If you have a dual-band router, make sure you know the password for the 2.4 GHz network, as this is often the cause of connection failure.
The smartphone must be connected to the same Wi-Fi network to which the printer is connected. In some cases, it may be necessary to temporarily disable mobile data (3G/4G/5G) to prevent the system from attempting to use it instead of the local connection.
⚠️ Important: Make sure the Attention light (flashing triangle) on the printer is off. If it is flashing, first troubleshoot the paper or cartridges, otherwise the network settings may not be saved.
- 📱 A smartphone or tablet with internet access
- 📶 A router with a known Wi-Fi password
- 🖨️ A working HP Deskjet 2130 printer with cartridges installed
- 🔌 USB cable (may be required for initial driver setup on your PC if a direct connection doesn't work)
Checking the compatibility of operating systems is also an important step. Appendix HP Smart Requires Android 5.0 or later, or iOS 12.0 or later. On older devices, installation may not be possible without updating the phone's firmware.
Using the HP Smart app to set up
The main tool for managing printing is the official application HP SmartIt is available in the Google Play and App Stores. Once installed, the app automatically scans the network for HP devices, but for Deskjet 2130 Manual initialization of the addition process is often required.
Launch the app and tap the "Add Printer" button or the plus icon. If the device isn't found automatically, select "Printer not showing up" and follow the on-screen instructions. The app will offer several connection methods, including "Wireless Connection."
During setup, the app may request permission to access geolocation. This is necessary for the correct search for Wi-Fi networks, as modern mobile operating systems require it to scan the surrounding area. Without this permission, the list of available networks may remain empty.
⚠️ Please note: The HP Smart app interface may be updated. If you don't see the buttons described, look for the "Printer Settings" or "Network Settings" section in the device menu.
Entering the Wi-Fi password is crucial. The system can automatically retrieve it from your phone's settings, but if you make a mistake, it's best to enter the password manually, paying close attention to capitalization.
Setting up Wi-Fi Direct for printing without a router
If your router is unavailable or you are away from home, you can use technology Wi-Fi DirectIn this case, the printer creates its own wireless network to which the phone connects. This is ideal for printing photos from a party or documents in the office without access to corporate Wi-Fi.
To activate this feature on the control panel HP Deskjet 2130 Press and hold the Wireless button and the Information button simultaneously for 3 seconds. The Wi-Fi Direct indicator will begin flashing, indicating that the device is in search mode.
On your phone, go to Wi-Fi settings and find the network with the name "HP-Deskjet-2130." The default password is usually located on a sticker next to the wireless button or printed on a test page that can be accessed by holding the "Info" button.
Default password: 12345678After connecting the printer to the network, open a document or photo in your gallery, select "Print," and find the device in the list of available printers. Print quality is not affected over this connection, but data transfer speeds may be slower than through a router.
Alternative method: emulation via PC and USB
Because the model HP Deskjet 2130 Since a printer lacks a full-fledged network interface, the most reliable way to set up printing in a stationary environment is to use a computer as a gateway. You connect the printer to the PC via USB, and the PC distributes the print job over the network.
In Windows, open the Control Panel, go to Devices and Printers, select your HP Deskjet 2130, and go to Printer Properties. On the Sharing tab, check the box next to "Share this printer" and note the device's network name.
For phones, this method requires installing additional software, as native support for shared Windows printers on mobile operating systems is limited. Third-party print emulator apps that detect the shared printer on the local network are often used.
| Connection method | Necessary equipment | Complexity | Print speed |
|---|---|---|---|
| HP Smart (Wi-Fi) | Router, smartphone | Average | High |
| Wi-Fi Direct | Smartphone | Low | Average |
| Via PC (USB) | Computer, USB cable | High | Depends on the PC |
This method has one significant drawback: the computer must be turned on and connected to the same network as the phone. However, it provides maximum compatibility with older printer models that don't support modern cloud technologies.
Troubleshooting connection issues
Users often encounter a situation where the printer is visible on the network, but the status is "Offline" or "Printing Error." This may be due to firewall or antivirus settings on the computer if the sharing method is used, or an IP address conflict in the router.
If the application HP Smart If the printer can't find the device, try resetting the printer's network settings. To do this, press and hold the "Wireless" and "Cancel" buttons simultaneously for 3 seconds. The Power and Wireless lights will flash, indicating the network settings have been reset.
☑️ Connection diagnostics
Make sure MAC address filtering is not enabled on your router. If this is enabled, new_device_ will not be able to access the network, even with the correct password. You can find the device's address by printing a wireless report (by holding down the "Information" button).
⚠️ Warning: WPA2/WPA3 security protocols may block older devices. If all else fails, try temporarily setting your router's compatibility mode to WPA/WPA2 Mixed.
Printing Photos and Documents: Practical Tips
Once successfully connected, the world of mobile printing opens up. For photos, use the "Print Photos" feature in the HP Smart app, which automatically enhances image quality and selects the optimal paper size.
When printing documents from a browser or office applications, it is important to select the correct margin size. Model HP Deskjet 2130 supports borderless printing only on special photo formats, so for A4 documents it's best to leave standard margins to prevent text from being cut off.
How to save on ink?
Use the "Draft" or "Economy Print" mode in the driver settings before submitting a job. This reduces ink consumption by up to 30%, slightly reducing color saturation, which is perfectly acceptable for internal documents.
Use your printer regularly, at least one page per week. This will prevent ink from drying out in the print head, which is the most common cause of inkjet failure. If the printer has been idle for a long time, run a head cleaning procedure through the app.
Scan quality can also be adjusted via the mobile app. For text documents, the resolution is sufficient. 200 dpi, and for photographs it is better to set 300 dpi and higher, although this will increase the file size and transfer time.
Frequently Asked Questions (FAQ)
Can the HP Deskjet 2130 be connected to 5GHz Wi-Fi?
No, this model only supports the 2.4 GHz standard. Make sure your router broadcasts this network and that your phone is connected to it during setup.
What should I do if my phone says "Printer not responding"?
Check that the devices are on the same network. Also try rebooting the router and printer. Sometimes removing the printer from the phone's device list and adding it again helps.
Do I need internet access to print via Wi-Fi Direct?
No, internet access is not required. Wi-Fi Direct creates a local network between your phone and the printer. However, if you're printing a document from the cloud (Google Drive, iCloud), your phone will need internet access to download the file.
How to find out the IP address of a printer?
Press and hold the Information (i) button on the printer's control panel for a few seconds. The device will print a report showing the IP address and connection status.
Does the HP Deskjet 2130 support AirPrint?
The 2130 model does not have built-in AirPrint support. Printing from iOS devices is only possible via the HP Smart app or the Wi-Fi Direct method described above.