Connecting the HP DeskJet 2720 Printer to Wi-Fi: A Complete Guide with Photos and Tips

Wireless printer connection HP DeskJet 2720 Connecting to a home or office Wi-Fi network saves time and eliminates the need to connect a device via USB every time you need to print. However, not all users know how to properly configure this connection—especially when setting it up for the first time or after resetting the router.

In this article, we will look at all available connection methods. HP DeskJet 2720 to Wi-Fi, including the standard method through the printer control panel, an alternative option using the program HP Smart, as well as manual configuration for complex networks. We'll also cover common errors (for example, when a printer can't find the network or constantly loses connection) and how to troubleshoot them. If you're new to setting up network devices, don't worry: the instructions are tailored for beginners, with step-by-step screenshots and explanations.

Before you begin, make sure your HP DeskJet 2720 It's plugged into a power outlet, has cartridges installed (even if they're empty), and the router is working properly and providing internet to other devices. These basic requirements are often overlooked, leading to a delayed setup process.

1. Preparing for connection: what you need to check before starting

Before setting up Wi-Fi on the HP 2720 printer, follow a few simple steps to avoid common problems:

• 🔌 Power and cartridges: The printer must be plugged in and the power light must be green. Make sure there are cartridges installed (even empty ones), otherwise some menu functions may be blocked.
• 📶 Wi-Fi stability: Check that the router is distributing internet to other devices (smartphone, laptop). If the network is unstable, the printer may not connect or keep disconnecting.
• 📱 Mobile application: Download the official app HP Smart to a smartphone (available for Android And iOS). It will be useful for an alternative connection method.
• 🔒 Wi-Fi password: Have your network password ready—you'll need it later. If you've forgotten it, look on the router's sticker or in the settings of the device you're using to read this article.

Please pay special attention to router operating modeSome models support frequency division. 2.4 GHz And 5 GHz. Printer HP DeskJet 2720 works only with networks 2.4 GHz - If your router distributes both frequencies under one name (SSID), try temporarily disabling it 5 GHz or create a separate network for 2.4 GHz.

⚠️ Attention: If your router uses a security standard WPA3, the printer may not connect. In this case, temporarily switch the network to WPA2-PSK (security settings are usually located in the router's web interface at 192.168.0.1 or 192.168.1.1).

2. Method 1: Connecting via the printer control panel

This is the most reliable method, which works even without additional software. Follow the instructions:

1. Turn on the printer HP DeskJet 2720 and wait until it boots up completely (the power indicator stops blinking).

2. On the printer control panel, press and hold the button Wi-Fi (antenna icon) for 3-5 seconds until the wireless indicator flashes.

3. Click the button Information (the "i" icon in a circle) - the printer will start searching for available networks.

4. Using the arrow buttons (↑/↓) select the name of your Wi-Fi network (SSID) and press OK.

5. Enter the network password using the keys on the keypad (use the arrow keys to select characters). To confirm, press OK.

6. Wait for the message Connected — the Wi-Fi indicator will stop flashing and turn green.

If your printer doesn't find your network, check:

• 📡 Distance to the router - the printer should be no further than 5-7 meters from the signal source.
• 🔄 Router operating mode - the network must be in range 2.4 GHz (see the Preparation section).
• 🔒 Hidden network - if your Wi-Fi does not broadcast a name (SSID), you will need to enter it manually (see the next section).

The printer is turned on and ready to use|The Wi-Fi indicator is blinking (searching mode)|The network name (SSID) is displayed in the list|The Wi-Fi password is prepared|The router is operating in 2.4 GHz mode-->

3. Method 2: Connecting via the HP Smart app

If setting up via the control panel seems complicated, use the official application HP SmartThis method is convenient because it allows you to control the printer from your phone or tablet, as well as print documents and photos directly from your mobile device.

Instructions for Android And iOS:

1. Download and install the application HP Smart from Google Play or App Store.

2. Launch the app and allow location access (required to search for printers).

3. Click Add a printer (Add Printer) - the application will start searching for available devices.

4. If the printer is not found, select Setting up a new printer (Set Up a New Printer).

5. Follow the on-screen instructions: the app will prompt you to connect to the printer's temporary network (its name will begin with HP-Setup...).

6. After connecting to the temporary network, return to HP Smart and select your primary Wi-Fi network. Enter the password.

7. Wait for the setup to complete – the printer will automatically connect to your network.

Important: If the printer doesn't appear in the list of print devices on your computer after setup, restart both the printer and the computer. Sometimes you need to install drivers from the official HP website.

⚠️ Attention: application HP Smart may request to create an HP account. This step is not required to connect the printer, but is required to access cloud features (such as printing from Google Drive).

4. Method 3: Connecting via WPS (for compatible routers)

Technology WPS (Wi-Fi Protected Setup) allows you to connect devices to the network without entering a password—just press a button on the router. This method works if your router supports WPS (usually there's a corresponding button with a 🔄 symbol or the word WPS).

How to connect HP DeskJet 2720 via WPS:

1. Make sure that your router supports WPS and the function is enabled (in the router settings).

2. On the printer, press and hold the button Wi-Fi until the indicator starts flashing.

3. Press the button within 2 minutes WPS on the router (usually it is located on the back panel).

4. Wait until the Wi-Fi indicator on the printer stops blinking and turns green—this means the connection is successful.

If connection failed:

• 🔄 Try repeating the process by holding down the button WPS on the router longer (up to 5 seconds).
• ⚙️ Check your router settings to see if WPS is enabled (sometimes the feature is disabled by default).
• ⏱️ Make sure the printer and router are close together—the WPS signal has a limited range.

5. Manually connect to a hidden Wi-Fi network

If your network does not broadcast the name (hidden SSID), the printer won't be able to find it automatically. In this case, you'll need to enter the parameters manually:

1. On the printer, go to the menu Settings → Wireless network → Setting up Wi-Fi.

2. Select Manual setup (Manual Setup).

3. Enter the network name (SSID) manually using the keys on the printer panel.

4. Select the security type (WPA2-PSK in most cases).

5. Enter the network password and save the settings.

If you don't know the exact SSID or security type, look them up in your router settings (usually at 192.168.0.1 or 192.168.1.1) or on the sticker on the back of the router.

What should I do if my printer doesn't save my Wi-Fi settings?

If after manual input of the printer parameters HP DeskJet 2720 does not save settings and resets, try:

1. Reset the printer's network settings (hold down the button Wi-Fi 10 seconds).

2. Update the printer firmware via HP Smart or the official website.

3. Temporarily disable the function on the router Fast channel switching (if any).

6. Checking the connection and troubleshooting

After setup, check that the printer is successfully connected to the network:

• 🖨️ Print network configuration report: on the printer, go to Settings → Reports → Network Configuration ReportIt will indicate IP address printer and connection status.
• 📱 In the app HP Smart The printer should show up as Connected.
• 💻 On your computer, try adding a printer via Parameters → Devices → Printers and scanners (Windows) or System Preferences → Printers (macOS).

Typical problems and their solutions:

• 🔴 The printer is connected but does not print: Check if the drivers are installed on your PC. Download them from official HP website, specifying the model DeskJet 2720.
• 🟡 The connection is unstable: Move the printer closer to the router or change the Wi-Fi channel in the router settings (for example, from Auto on 6 or 11).
• 🔵 The printer is not visible on the network: Check that client isolation mode is not enabled on your router (AP Isolation or Client Isolation).

⚠️ Attention: If the printer still won't connect after several attempts, try resetting its network settings. To do this, hold down the button Wi-Fi And Cancel simultaneously for 10 seconds. After resetting, repeat the setup from scratch.

7. Alternative connection methods (if Wi-Fi doesn't work)

If you are unable to set up a wireless connection, please use alternative methods:

• 🖥️ USB cable: Connect the printer to your computer via USB and install the drivers. After that, you'll be able to print directly, without Wi-Fi.
• 📱 HP Smart Direct Connect: If your printer doesn't connect to your network but you need to print something urgently, use a temporary direct connection via HP Smart (the printer will create its own network to which the phone will connect).
• 🌐 Cloud Printing: Some models support email printing. Configure this feature. HP ePrint in the printer menu and send documents to a special address.

For continuous use, it's best to set up Wi-Fi, as alternative methods have limitations (for example, printing via USB requires a physical connection, and cloud printing may require a fee).

8. Updating the printer firmware for stable operation

If the printer HP DeskJet 2720 If your phone frequently loses Wi-Fi connection, it could be due to outdated firmware. There are two ways to update it:

Method 1: Via the HP Smart app

1. Open HP Smart and select your printer.

2. Go to the section Printer settings or Service.

3. Click Update firmware (Firmware Update) and follow the instructions.

Method 2: Manually from the official website

1. Go to the support page HP.

2. Please enter your printer model (DeskJet 2720) and select your operating system.

3. Download the latest firmware version and follow the installation instructions (usually this requires connecting the printer via USB).

The firmware update may take up to 10 minutes. Do not turn off the printer during the process!

FAQ: Answers to frequently asked questions

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

Please check the following points:

1. Are the drivers installed for HP DeskJet 2720 on your computer. Download them from official website.
2. Disable your firewall or antivirus software—they may be blocking network access to the printer.
3. Make sure the printer and computer are on the same network. Print a network configuration report on the printer and compare IP addresses.

If the problem persists, try adding the printer manually via IP address (in Windows or macOS printing preferences).

Can I connect my HP DeskJet 2720 to a public network (like in a cafe)?

Technically yes, but with some caveats:

• The network must operate in the range 2.4 GHz.
• If the network requires authorization via a browser (for example, entering a login/password), the printer will not be able to connect—it does not support such mechanisms.
• Some public networks block devices that are not smartphones or laptops.

For printing in such conditions, it is easier to use a direct connection via HP Smart (the printer will create its own network to which your phone will connect).

How do I reset my printer's Wi-Fi settings?

To reset network settings HP DeskJet 2720:

1. Turn on the printer.
2. Hold the button Wi-Fi And Cancel (❌) simultaneously for 10-15 seconds until the indicators start flashing.
3. The printer will reset to factory Wi-Fi settings.

After the reset, you can reconfigure your network connection.

The printer connects to Wi-Fi, but prints very slowly. What's wrong?

Slow Wi-Fi printing may be due to:

• Weak signal - move the printer closer to the router.
• If your network is overloaded, try disconnecting other devices or changing the Wi-Fi channel in your router settings.
• Poor paper quality or dried ink - clean the print head through the printer menu.

Also try printing the document at a lower resolution (for example, in Draft).

Can this printer be connected to Wi-Fi Direct?

Yes, HP DeskJet 2720 supports Wi-Fi Direct — a technology that allows you to connect to a printer directly, without a router. To enable it:

1. On the printer, go to Settings → Wireless network → Wi-Fi Direct.
2. Enable the function and write down the network name and password (they will be displayed on the printer screen).
3. Connect to this network from your phone or computer and print directly.

Please note: In Wi-Fi Direct mode, the printer will not be connected to the Internet.