Modern office equipment demands maximum mobility, and wired connections are becoming a thing of the past, giving way to wireless technologies. Printer HP Laser 107w It's one of the most popular monochrome devices for home and small businesses, offering a compact design and Wi-Fi support. However, initial network setup can often be challenging for users unfamiliar with the device's firmware.
The main difficulty is that this model lacks a full-fledged menu screen, and navigation is via a single button and indicator lights. You'll need to learn how to read the LED blinking patterns and correctly use the software for initial configuration. In this article, we'll cover every step in detail, from preparing the router to printing the final test page.
Before you begin setting up, make sure your router is broadcasting in the 2.4 GHz range, as the printer does not support the 5 GHz standardThis is a common error that prevents the device from detecting the home network, even if all steps are followed correctly. Also, be sure to have the included USB cable handy, as it's needed for the initial Wi-Fi settings transfer.
Equipment preparation and compatibility testing
The first step should be to check your local network infrastructure. Printers of the series Laser 107 Printers are sensitive to router security settings, so it's important to ensure MAC address filters aren't blocking new devices. If you're using a guest network or corporate Wi-Fi with client isolation, the printer won't be able to communicate with the computer even after a successful connection.
Make sure the device is loaded with toner and paper is loaded in the tray, as some models may enter error mode when attempting setup without consumables. The distance between the router and the printer during setup should be minimal to prevent data packet loss during the handshake process.
⚠️ Note: If the "AP Isolation" feature is enabled on your router, the printer will not be visible to your computer. Disable this feature in your router settings before starting this procedure.
For stable operation, it is recommended to reserve a static IP address for the printer in your router's DHCP settings. This will prevent situations where, after rebooting the router, the computer loses connection to the printer due to a changed address.
Resetting the printer's network settings
If the printer was previously used on a different network or you changed the router, you need to reset the network settings. This will clear saved Wi-Fi profiles and return the network module to standby mode. HP Laser 107w The reset procedure is performed by a combination of actions with a single control button.
Press and hold the wireless button for approximately 10-15 seconds until the lights begin flashing simultaneously. After releasing the button, the device will restart the network module, and the Wi-Fi indicator should light or flash, indicating it's ready to pair.
After reset, the device may automatically create an access point HP-Setup-107w, which you can connect to from your phone for quick setup via the app, but we'll look at a more reliable method via a PC.
Connection Method via USB Cable (Recommended)
The most reliable way to set up wireless connection — Use a temporary USB connection. This method allows the computer to directly transmit the SSID and password of your Wi-Fi network to the printer, bypassing complex button manipulation.
You'll need to download the full driver and utility package from the official HP support website. Avoid using basic Windows Update drivers, as they often don't include a network setup wizard. Run the installer and select "Wireless" or "Wi-Fi" as the connection type.
☑️ USB setup algorithm
When the installer prompts you to connect the device, insert the USB cable. The program will automatically detect the printer and offer to transfer your current Wi-Fi network settings. At this point, it's important that your computer is connected to the network you want to connect the printer to.
⚠️ Caution: While transferring network settings, do not remove the USB cable until the installer reports success. Interrupting the process may corrupt the network configuration.
After a successful data transfer, the Wi-Fi indicator on the printer will turn solid blue. This means the device has received an IP address from the router and is ready to use. You can now disconnect the USB cable—it's no longer needed.
Setup via WPS (without using a cable)
If your router supports the technology WPS (Wi-Fi Protected Setup), you can connect the printer without a computer or USB cable. This is the fastest method, but it requires physical access to both devices.
Press the WPS button on your router. It's usually located on the back panel and may require holding for 1-2 seconds. After activating the router's search mode, navigate to the printer.
Press and hold the wireless button on the printer control panel HP 107w until the Wi-Fi indicator starts blinking. The device will enter WPS signal search mode and pair automatically within two minutes.
What to do if WPS doesn't work?
Some ISPs disable the WPS feature on their routers for security reasons. If the router button doesn't respond or the printer light stops blinking without a connection, try the USB cable method or setup via the HP Smart mobile app.
A successful connection is confirmed by a steady Wi-Fi indicator. If the indicator is blinking, the connection has failed, and you should repeat the process, ensuring you are in a strong signal area.
Using the HP Smart app for mobile setup
Smartphone owners can use the app HP Smart for initial printer setup. This method is convenient because it doesn't require searching for drivers on your PC, but it does require an HP account.
First, enable pairing mode on the printer (by holding the Wi-Fi button), then launch the app on your phone and tap "Add Printer." The app will find the device and offer to share the passwords for the Wi-Fi network your smartphone is connected to.
| Parameter | Description | Value for HP 107w |
|---|---|---|
| Wi-Fi frequency | Operating range of the module | 2.4 GHz only |
| Security protocol | Encryption type | WPA2 / WPA3 |
| Direct mode | Direct connection | Supported |
| AirPrint | Printing from iOS/macOS | Built-in |
The app also allows you to monitor toner levels and perform diagnostics in real time. Once configured via your phone, computers on the same network will automatically see the printer via Bonjour or mDNS.
Solution and connection diagnostics
Even if you follow the instructions correctly, there may be situations where the printer doesn't see the network or loses connection. Often, the problem stems from dual-frequency router settings, where the 2.4 GHz and 5 GHz networks are combined (Smart Connect). In such cases, the printer may attempt to connect to the 5 GHz band and be rejected.
Try temporarily separating the networks in your router settings by giving them different names, for example, "Home_2.4" and "Home_5." Connect the printer to the 2.4 network. Also, check if your router has MAC address filtering enabled, which could block new devices.
⚠️ Note: Router interfaces and driver versions are subject to update. If menu items differ from those described, please consult your router manufacturer's official documentation.
If the printer is connected but not printing, check the print queue status in Windows. Sometimes you need to manually change the device's port to an IP address if the system created a virtual port with an error. Remove the old device and add a new one by finding it by IP address.
Frequently Asked Questions (FAQ)
Can the HP 107w be connected to a 5GHz network?
No, the model has a built-in Wi-Fi module. HP Laser 107w Only supports the 2.4 GHz frequency range. To connect to a modern router, make sure the 2.4 GHz network is enabled and named separately.
What password do I need for Wi-Fi Direct?
The Wi-Fi Direct connection password is usually printed on a sticker on the printer's body or in the network configuration report. By default, it may be a numeric combination, but it can be changed through the printer's web interface (EWS).
My printer disappeared from the network after changing my router. What should I do?
You need to reset the printer's network settings (hold the Wi-Fi button for 10+ seconds) and repeat the setup procedure via a USB cable or the HP Smart app, transferring new data from your router.
Does iPhone printing work with this printer?
Yes, this model supports AirPrint. To print, simply connect your iPhone and printer to the same Wi-Fi network. No iOS drivers are required.