Connecting the Epson L355 Printer to Wi-Fi Without a Cable: A Complete Guide

Wireless printer connection Epson L355 Connecting to a Wi-Fi network eliminates the need for USB cables and allows you to print from any device in your home or office. However, many users encounter difficulties during initial setup: the printer doesn't find the network, requires a password, displays errors, or simply doesn't connect. In this article, we'll cover all possible connection methods. Epson L355 to Wi-Fi without using a cable, and we will also consider typical problems and their solutions.

Model L355 belongs to the series ecotank printers with a continuous ink supply system, but its wireless features are in no way inferior to laser counterparts. The main advantage is its support for standards Wi-Fi 802.11 b/g/n and the ability to work through WPS, Epson Connect or manually entering network parameters. The method you choose depends on your router and the device (PC, smartphone, or tablet) you're using to configure it.

If you've never set up network printers before, don't worry: the process takes no more than 10 minutes with the right approach. And if something goes wrong, you'll find solutions to the most common errors at the end of this article.

1. Preparing the printer and network for connection

Before setting up Wi-Fi, make sure your printer and network are ready to connect. Skipping this step often leads to problems when Epson L355 does not see the router or cannot connect due to incompatible settings.

Here's what you need to do Necessarily:

• 🔌 Turn on the printer Plug it into a power outlet and wait until it's fully charged (the indicators will stop flashing). The green light on the control panel should be on. Wi-Fi (or antenna icon).
• 📶 Check your router: It must be turned on and the Wi-Fi indicator must be actively blinking. If you are using a dual-band router (2.4 and 5 GHz), the printer only supports 2.4 GHz.
• 🔒 Make sure the network is not hidden (in the router settings, disable the option Hide SSID or Hide network name).
• 📱 Prepare your device for setupThis can be a Windows/macOS PC, an Android/iOS smartphone, or a tablet. The device must be connected to the same Wi-Fi network to which you want to connect the printer.

Pay special attention network security type. Epson L355 Compatible with the following encryption standards:

⚠️ Attention: If your router uses WPA3, the printer won't be able to connect. Go to your router settings (usually at 192.168.0.1 or 192.168.1.1) and temporarily switch to WPA2-PSK.

2. Method 1: Connecting via WPS (the fastest method)

Technology WPS (Wi-Fi Protected Setup) allows you to connect your printer to the network without entering a password—just press a button on the router. This method works if your router supports WPS (usually there's a button labeled WPS or the 🔄 icon).

Step-by-step instructions:

1. Make sure the printer is turned on and within range of the router (no further than 2-3 meters during setup).
2. On the printer control panel, press and hold the button Wi-Fi (with antenna icon) within 3 seconds, until the indicator starts flashing quickly.
3. For 2 minutes press the button WPS on the router. The Wi-Fi indicator on the printer should stop blinking and remain solid.
4. Wait for the printer to print connection report (Network information sheet). If this does not happen, check the connection manually.

If the printer does not connect:

• 🔄 Repeat the process while holding the button WPS on the router longer (sometimes it takes 5-10 seconds).
• ⚙️ Check if WPS is enabled in your router settings (some models require manual activation).
• ⏱️ Make sure the printer and router are close to each other - WPS is sensitive to weak signals.

3. Method 2: Connecting via the Epson iPrint app (for smartphones)

If your router doesn't support WPS or you prefer to configure the printer from your smartphone, use the official app. Epson iPrint (available for Android And iOS). It automatically finds the printer and helps you connect it to the network.

Step-by-step instructions:

1. Download and install Epson iPrint from the App Store or Google Play.
2. Turn it on on your smartphone Wi-Fi and connect to the network you want to connect the printer to.
3. Launch the app and click Add a printer → Setting up the printer.
4. Select a model Epson L355 from the list (if it is not there, click My printer is not showing up).
5. Follow the on-screen instructions: the app will prompt you to enter your Wi-Fi password or use WPS.
6. Once the connection is successful, the printer will print a confirmation test sheet.

The advantages of this method:

• 📱 No computer required – complete setup from your smartphone.
• 🔍 Automatically detects your printer model and suggests optimal settings.
• 📊 Allows you to test your prints right from the app.

⚠️ Attention: If the app doesn't find the printer, make sure that the printer is turned on on your smartphone. Bluetooth - some models Epson use it for initial synchronization.

4. Method 3: Manually entering Wi-Fi parameters (for advanced users)

If WPS and the app don't work, you can enter the network settings manually through the printer's control panel. This method requires knowing the network name (SSID) and password, but is guaranteed to work even with non-standard router settings.

Instructions:

1. Press the button on the printer Home (or Settings, depending on the firmware).
2. Go to the menu Wi-Fi Setup → Manual Setup (or Manual setup).
3. Select your network from the list. If it is not there, enter SSID manually (case sensitive!).
4. Select the security type (WPA2-PSK (in most cases) and enter the password.
5. Confirm the settings and wait for the connection to complete. The printer will print a report with the IP address.

If the printer gives an error Unable to connect:

• 🔤 Check that you entered your password correctly (especially upper/lower case characters).
• 📡 Make sure that the printer and router are operating in the same range (2.4 GHz).
• 🔄 Restart your router and printer, then try again.

Critical detail: if your router uses DHCP, the printer will automatically receive an IP address. If not, you'll need to manually assign a static IP address in your router settings.

What should I do if my printer doesn't save my Wi-Fi settings?

If after manual input of the printer parameters Epson L355 If the printer loses connection after rebooting, the problem may be related to power saving. Go to the printer menu and select Network Settings → Advanced and disable the option Wi-Fi energy saving (if applicable). Also, check if your router settings are reset—some models (such as TP-Link) can block devices after a firmware update.

5. Checking the connection and setting up printing

Once your printer is successfully connected to Wi-Fi, you need to make sure it's accessible for printing from other devices. Here's how:

On Windows:

1. Open Control Panel → Devices and Printers.
2. Click Add a printer and select Epson L355 from the list of network devices.
3. If your printer is not displayed, enter its IP address (can be found in the connection report).

On macOS:

1. Go to System Preferences → Printers & Scanners.
2. Click + and select the tab IP.
3. Enter the printer IP address, model (Epson L355) and driver (download from official website).

On Android/iOS:

• 📱 In the app Epson iPrint The printer should appear automatically.
• 🖨️ To print from other apps (like Google Docs), select Epson L355 in the list of printers.

6. Common mistakes and their solutions

Even with proper setup, problems can still arise. Here are the most common errors and how to fix them:

Error: The printer cannot find a Wi-Fi network.

• 📡 Check that the router is operating within the range 2.4 GHz (the printer does not support 5 GHz).
• 🔌 Restart your router and printer (turn them off for 30 seconds).
• 🔍 Make sure the network is not hidden (Hide SSID disabled).

Error: Incorrect password or authentication failed

• 🔤 Enter your password carefully—the printer is case-sensitive and sensitive to special characters.
• 🔄 Try changing your network password to a simpler one (for example, 12345678) and try connecting again.
• ⚙️ Check the security type on your router—the printer doesn't support it. WPA3.

Error: The printer is connected but does not print.

• 🖨️ Make sure your printer is selected as default in your device settings.
• 📡 Check that your computer/smartphone is connected to the same network as the printer.
• 🔄 Reinstall the printer driver (download the latest version from Epson website).

Error: Wi-Fi indicator blinks but does not connect

• ⚡ Check that the printer is receiving power (try a different outlet).
• 🔄 Perform a network reset on the printer: hold down the button Wi-Fi for 10 seconds.
• 📡 Make sure there are no other networks with the same name within range (SSID).

⚠️ Attention: If after several attempts the printer still does not connect, try temporarily disabling the function on your router. Safe mode or MAC address filtering - They can block new devices.

7. Additional functions after connection

Once Wi-Fi is successfully set up, you can use the printer's advanced features:

Print by email

• 📧 Register your printer with the service Epson Connect (via app or website).
• 🔗 You will be assigned a unique email address (for example, yourprinter@print.epsonconnect.com).
• 📄 Send documents to this address - the printer will print them automatically.

Remote printing via the cloud

• ☁️ Connect the printer to Google Cloud Print or Epson Email Print.
• 📱 Print from any device, even outside your home network.

Network scanner

• 🖼️ Use the app Epson Scan to scan documents directly to your computer or smartphone.
• 📡 Scanned files can be saved to the cloud (Google Drive, Dropbox).

To activate these features:

1. Install the latest version of drivers from Epson website.
2. Register your printer in Epson Connect (email required).
3. Follow the instructions in the app Epson iPrint.

FAQ: Frequently asked questions about connecting the Epson L355 to Wi-Fi

Is it possible to connect the Epson L355 to Wi-Fi without a computer?

Yes, for this use:

• 📱 Application Epson iPrint on a smartphone (Android/iOS).
• 🔄 Button WPS on the router (if there is one).
• 🖥️ Printer control panel for manual password entry.

A computer is not required, but may be needed to install drivers after connection.

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

Check the following:

1. The computer and printer are connected to one network.
2. The protocol is enabled in the printer settings. LPD or Raw (for network printing).
3. The correct driver is installed (download from official website).
4. Firewall or antivirus does not block access (add the printer to exceptions).

How to reset Wi-Fi settings on an Epson L355?

To reset your printer to factory network settings:

1. Turn on the printer.
2. Press and hold the button Wi-Fi (with antenna icon) within 10 seconds, until the indicator starts flashing quickly.
3. Release the button and the printer will reset its network settings.

After the reset, you can reconfigure the connection using any of the methods described.

Is it possible to connect Epson L355 to two networks at the same time?

No, the printer only supports connection to one Wi-Fi network at a time. However, you can:

• 🔄 Quickly switch between networks via the control panel.
• 📡 Use Epson Connect for printing from any network via email.

How do I update my printer firmware for better Wi-Fi performance?

Updating the firmware may solve connection issues:

1. Download the latest firmware for Epson L355 With official website.
2. Connect the printer to your computer via USB.
3. Run the firmware file and follow the instructions.

Do not turn off the printer during the update!