How to connect the Canon LBP7110Cw printer to Wi-Fi: complete instructions with pictures and tips

Laser printer Canon LBP7110Cw — a popular model for home and small offices, combining compact size, color printing, and wireless capabilities. However, connecting it to Wi-Fi often raises questions: the indicator light blinks abnormally, the drivers fail to install, or the network fails to find it. This article will help you avoid common errors and set up a connection on the first try.

We will consider all current connection methods: through printer control panel, using WPS technologies, as well as an alternative method via USB cable. We'll cover the setup separately. Windows 10/11, macOS and mobile devices. If you've already tried connecting and received an error, there's a section at the end of the article with solutions to the most common problems.

Before you begin, make sure your router supports the standard. 802.11b/g/n on frequency 2.4 GHz — LBP7110Cw does not work with networks 5 GHzAlso, check that the printer is turned on and has toner—without cartridges, the Wi-Fi function may be blocked.

1. Preparing the printer and network for connection

Before setting up Wi-Fi, there are several mandatory steps you need to complete. Skipping any of them can lead to problems later.

Firstly, reset the printer's network settings, if it has already been used on another network. To do this:

1. Press and hold the button Wi-Fi on the printer panel 10 seconds, until the indicator starts flashing quickly.
2. Release the button and the printer will return to factory network settings.

Secondly, check your router settings:

• 📶 Network SSID must be visible (not hidden).
• 🔒 Security type - only WPA2-PSK (AES) or WPA3-PSK. LBP7110Cw does not support legacy WEP And WPA-TKIP.
• 📡 Wi-Fi channel - it is better to choose a fixed one (for example, 6 or 11) to avoid automatic switching.

Also, make sure your printer has the latest firmware version. You can check this by printing status report:

1. Press and hold the button Cancel (Cancel) 5 seconds.
2. The printer will print out a sheet of technical information, which will contain a line Firmware Ver.

⚠️ Attention: If your network uses MAC address filtering, add the printer's MAC address (indicated in the status report) to the router's list of allowed devices in advance. Otherwise, the connection will be blocked.

2. Connecting via the printer control panel (AP mode)

This is the most reliable method, requiring no additional devices. The printer temporarily becomes an access point to which a computer or smartphone connects to transfer Wi-Fi settings.

Instructions:

1. Click the button Wi-Fi on the printer and hold it until the indicator light starts flashing blue and green (AP mode).
2. On your computer or smartphone, find the network with the name CANON_XX_LBP7110 (Where XX (The last digits of the printer's serial number) and connect to it. No password is required.
3. Open your browser and go to the address http://192.168.1.1 (or http://canonprinter.setup).
4. Select your home Wi-Fi network from the list, enter the password and click Connect.

If the page does not open:

• 🔄 Restart the printer (turn the power off and on).
• 📱 Disable mobile internet on your smartphone—it may interfere with the printer's local network connection.
• 🖥️ Temporarily disable your firewall or antivirus software on your computer.

Make sure the printer is in AP mode (flashing blue/green)

Connect to the CANON_XX_LBP7110 network

Open http://192.168.1.1 in your browser

Select your Wi-Fi network and enter the password-->

After successful connection, the printer will reboot and the indicator will Wi-Fi will light up greenIf the indicator is flashing orange — an error occurred (see section 6 for error codes).

3. Quick connection via WPS (without password)

If your router supports the technology WPS (button on the back panel), you can connect the printer without entering a password. It takes less than a minute.

Step-by-step instructions:

1. Make sure the indicator light on the router is on. WPS (usually blinks).
2. On the printer, press and hold the button Wi-Fi 3 secondsuntil the indicator starts flashing blue.
3. For 2 minutes press the button WPS on the router.
4. Wait for the indicator Wi-Fi the printer will light up green (about 30 seconds).

Advantages of the method:

• ⚡ No need to enter your Wi-Fi password.
• 🔒 Secure – data is transmitted in encrypted form.
• 🕒 Takes less than a minute.

⚠️ Note: Some routers (eg. TP-Link Archer C6) require WPS to be enabled in the web interface first. Go to the router settings (192.168.0.1 or 192.168.1.1) and activate the option Enable WPS in the section Wireless.

If connection failed:

• 🔄 Repeat the process while holding WPS on the router longer (up to 5 seconds).
• 📡 Move the printer closer to the router (maximum 2 meters).
• 🔧 Check that the router is in the enabled mode WPA2-PSK (WPS does not work with WPA3).

Via the control panel (AP mode)

Via WPS

Via USB cable

Another way-->

4. Alternative method: connecting via USB cable

If the printer does not see your Wi-Fi network or errors occur, you can transfer the settings via USB connection with a computer. This method works on Windows And macOS.

What you will need:

• 🖥️ A computer with the driver installed Canon LBP7110Cw.
• 🔌 USB cable (included with the printer).
• 📶 Access to Wi-Fi network (password must be known).

Instructions for Windows:

1. Connect the printer to your computer via USB.
2. Open Control Panel → Devices and Printers.
3. Find Canon LBP7110Cw, right click and select Printer properties.
4. Go to the tab Ports and add a new port of type Standard TCP/IP Port.
5. Enter the printer's IP address (can be found in the status report) or leave the field blank to search automatically.
6. In the setup wizard, select Wireless network and enter your Wi-Fi details.

For macOS:

1. Connect the printer via USB and open System Preferences → Printers & Scanners.
2. Click +, select Canon LBP7110Cw and add it.
3. On the menu Options and Supplies select Setting up Wi-Fi and follow the instructions.

OS	Path to settings	Need a driver?	Setup time
Windows 10/11	Control Panel → Devices and Printers	Yes	3-5 minutes
macOS	System Preferences → Printers & Scanners	Yes (downloads automatically)	2-3 minutes
Android	Application Canon PRINT	No	1-2 minutes
iOS	Application Canon PRINT or AirPrint	No	1 minute

After setup, disconnect the USB cable—the printer should remain connected to Wi-Fi. To test the connection, print a test page from the printer menu (Settings → Print Report).

5. Setting up printing from mobile devices (Android/iOS)

To print from your phone or tablet, you will need an app Canon PRINT (available in Google Play And App Store). It supports printing documents, photos and web pages.

Step-by-step instructions:

1. Install the application Canon PRINT and open it.
2. Click Add a printer and select LBP7110Cw from the list of available devices.
3. If the printer is not found, click Manual search and enter its IP address (can be found in the status report).
4. Select the document to print and configure the settings (number of copies, orientation, color/black and white mode).

For iPhone/iPad The function is also available AirPrint:

• 📱 Open the document (for example, in Pages or Safari).
• 🖨️ Click Share → Print.
• 🔍 Choose Canon LBP7110Cw from the list of printers.

What should I do if the app doesn't see the printer?

1. Make sure the printer and phone are connected to the same Wi-Fi network.

2. Restart the application Canon PRINT and a printer.

3. In your phone settings, temporarily disable battery saving for the app.

4. Check that AP Isolation mode is not activated on your router—it blocks communication between devices on the local network.

If printing is slow or stops, try:

• 📶 Switch the router to a channel 2.4 GHz with less workload (for example, 1 or 11).
• 📵 Disable on your phone Bluetooth And mobile data - they can create interference.
• 📄 Reduce the resolution of the printed image (in the application settings).

6. Common mistakes and their solutions

Even with proper setup, errors may still occur. Below is a table of error codes and troubleshooting steps.

Error code	Cause	Solution
E04	No Wi-Fi connection	Check your network password or restart your router. If the error persists, reset the printer (hold Wi-Fi 10 sec).
E13	Low toner level	Replace the cartridge or shake it (if there is still toner). When printing with an empty cartridge, Wi-Fi may turn off automatically.
E16	Router connection error	Change the router security type to WPA2-PSK (AES)Disable MAC address filtering.
E24	IP conflict on the network	Assign a static IP to the printer in the router settings or reset DHCP (ipconfig /release on PC).
E60	Firmware error	Update your printer software via USB (download the file from official Canon website).

If the printer connects to Wi-Fi but does not print:

• 🖨️ Check if the printer is installed as default device in Windows/macOS settings.
• 📂 Remove all jobs from the print queue (Control Panel → Devices and Printers → View Queue).
• 🔧 Reinstall the printer driver (download the latest version from the website Canon).

⚠️ Note: If your printer stops connecting after updating your router firmware, try rolling back your router firmware to the previous version. Some models (e.g., ASUS RT-AX55) have compatibility issues with LBP7110Cw in the latest software versions.

7. Optimize Wi-Fi for stable printing

To avoid connection drops and slow printing, configure your network according to these recommendations:

For router:

• 📶 Set a fixed channel 2.4 GHz (For example, 6) instead of automatic selection.
• 🔒 Disable the feature 802.11r (Fast Roaming) - it can cause connection breaks.
• 📡 Reduce the transmit power to 50-75%, if the printer is located close to the router (this will reduce interference).

For printer:

• 📍 Place the printer at a distance 1-3 meters from the router, avoiding obstacles (walls, metal objects).
• 🔋 Do not connect the printer to a power strip—use a power outlet directly.
• 📄 Print large documents in parts (by 50 pages) to avoid overheating the printer.

If you have a lot of devices (more than 10), consider creating guest network specifically for the printer. This will reduce the load on the main channel.

8. Updating the printer firmware

Regular firmware updates fix connection issues and add support for new security standards. You can check the latest version at Canon website (chapter Support → Drivers and Software).

Update instructions:

1. Download the latest firmware file for LBP7110Cw (usually has an extension .pfu).
2. Connect the printer to your computer via USB.
3. Run the downloaded file and follow the instructions of the update wizard.
4. Do not turn off the printer until the process is complete (approx. 5 minutes).

After update:

• 🔄 Restart the printer (turn the power off and on).
• 📋 Print a status report to check the new firmware version.
• 🖥️ Reinstall the drivers on your computer (the old version may conflict).

⚠️ Caution: If an error occurs during the update (such as a power outage), the printer may become inoperable. In this case, a service reset at an authorized service center will be required. Canon.

How to restore the old firmware?

Unfortunately, Canon does not provide an official firmware rollback method. If the new version causes problems, please contact support with a downgrade request. In some cases, a full printer reset (holding the button) helps. Cancel 20 seconds), but this does not guarantee a return to the previous version of the software.

FAQ: Frequently asked questions about connection

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

1. Verify that the printer and computer are on the same network. Print a status report and compare the IP addresses.

2. In Windows open Control Panel → Devices and Printers and press Add a printer. Select Add a printer by TCP/IP address and enter the printer IP.

3. Make sure that the router is not activated AP Isolation (client isolation).

4. Reinstall the printer driver by downloading it from official website.

Is it possible to connect a printer to Wi-Fi without a computer?

Yes, there are two ways:

1. Through AP mode (See Section 2): The printer creates its own network, which the smartphone connects to. Settings are transferred via the browser.

2. Through WPS (see section 3): if the router supports WPS, the connection occurs without entering a password.

My printer is printing very slowly over Wi-Fi. How can I speed it up?

Causes of slow printing and solutions:

• 📶 Weak Wi-Fi signal: Move the printer closer to the router or use a repeater.
• 🖼️ High resolution printing: in the driver settings, select Quick Print or Draft.
• 📡 Congested Wi-Fi channel: in the router settings, change the channel to a less busy one (for example, 1 or 11).
• 🖥️ Computer problems: Close background programs that use the network (torrents, cloud synchronization).

How do I reset my printer's Wi-Fi settings?

There are two ways:

1. Soft reset: hold the button Wi-Fi 5 secondsuntil the indicator starts flashing. This will only reset the network settings.

2. Full reset: hold the button Cancel (Cancel) 10 secondsThis will reset all printer settings to factory defaults.

After resetting, the printer will create a new network. CANON_XX_LBP7110 to re-configure.

Is it possible to connect a printer to two networks at the same time?

No, Canon LBP7110Cw It only supports connecting to one Wi-Fi network. If you need to switch between networks (for example, at home and at the office), you'll have to reconfigure each time or use USB cable for temporary connection.