How to connect a laptop to a Hisense TV via Wi-Fi: all the methods with step-by-step instructions

Wirelessly connect your laptop to your TV Hisense Wi-Fi opens up a wealth of possibilities, from watching movies on a big screen to presenting without the hassle of wires. However, many users encounter issues—the TV can't detect the device, the picture lags, or the sound cuts out. In this article, we'll cover all the current connection methods, including Miracast, DLNA, AirPlay and proprietary technologies Hisense, and we will also give advice on how to eliminate typical errors.

It's important to understand that the connection method depends on your TV model and laptop operating system. For example, older models Hisense (before 2018) may not be supported Miracast, and for macOS additional software will be required. We will consider options for Windows 10/11, macOS and even Linux, and we'll also explain how to check device compatibility before starting setup.

If you have previously tried to connect and encountered an error like "Device not supported" or "No signal"At the end of the article, there's a section with solutions to the most common problems. We've also compiled a technology compatibility chart for models. Hisense - this will help save time for experiments.

📊 What kind of laptop do you have?
Windows
MacBook
Linux
Chromebook

1. Preparing devices: what to check before connecting

Before you begin setup, make sure both devices meet the minimum requirements. This will save you from unnecessary setup hassles.

TV requirements Hisense:

  • 📺 Model no later than 2016 (earlier models may not support wireless protocols). Exception: series Hisense H8 And H9, where a Wi-Fi module is installed even in budget options.
  • 🔄 Updated software (check in Settings → Support → Software Update). Outdated versions often do not recognize new laptops.
  • 📶 Connect to the same Wi-Fi network as your laptop (exception - Miracast Direct, where a separate network is created).

Laptop requirements:

  • 🖥️ For Windows: version not lower than 10 (1803) with support Miracast (checked through Win + R → dxdiag → Save Info → Search for "Miracast").
  • 🍎 For macOS: version not lower Monterey 12.0 (For AirPlay) or additional software such as AirParrot.
  • 🐧 For Linux: installed packages wl-display or scrcpy (depending on the method).

Make sure the TV and laptop are on the same Wi-Fi network

Check Miracast support on your laptop

Update your TV software to the latest version

Disable VPN and firewalls on your laptop

Prepare an HDMI cable in case of failure-->

Critical Note: Televisions Hisense series A6K (2020–2021) have a bug with connection DLNA via routers TP-Link Archer C6In this case, only updating the router firmware or using Miracast.

2. Method 1: Miracast – direct connection without a router

Miracast — is a wireless image transmission standard that works without an intermediary (router). The TV and laptop create a direct connection, which reduces latency and improves image quality. However, not all models Hisense support this protocol out of the box.

How to enable Miracast on a TV Hisense:

  1. Open Settings → Network → Miracast (in some models the path is: Settings → Wireless → Screen Mirroring).
  2. Activate the option "On" or "Allow connection".
  3. Remember the name of the device (for example, Hisense-55A6K-XXXX) - you will need it to search from a laptop.

Connecting from a Windows laptop:

  1. Click Win + K (or open Settings → System → Display → Connect to a wireless display).
  2. Select your TV from the list of available devices. Hisense.
  3. Confirm the connection on the TV screen (you may be asked to enter a PIN code).

If the laptop does not find the TV:

  • 🔄 Restart both devices.
  • 🛠️ Update your laptop's Wi-Fi adapter drivers (via Device Manager → Network Adapters).
  • 📡 Make sure it is disabled in your router settings AP Isolation (client isolation).

3. Method 2: DLNA – transferring media files over the network

DLNA (Digital Living Network Alliance) allows you to stream to your TV Hisense movies, music, and photos stored on a laptop. Unlike MiracastThis method doesn't duplicate the screen; it only transfers files. This method is suitable for viewing content without having to operate a laptop.

Setting up DLNA on your TV:

  1. Go to Settings → Network → DLNA (or Multimedia → DLNA Server).
  2. Enable the option "On" and select Allow access.
  3. Remember the server name (eg. Hisense_DLNA_55A7).

Setting up a laptop (Windows):

  1. Open Control Panel → Network and Internet → Network and Sharing Center → Advanced Sharing Settings.
  2. Turn on File and Printer Sharing And "Media Streaming".
  3. Install a server program, for example, Serviio or Plexif built-in Windows functions do not work.

To watch content on TV:

  1. On the remote control Hisense press the button SOURCE (or INPUT).
  2. Select DLNA or Multimedia.
  3. In the list of servers, select your laptop and the desired file.
Why doesn't DLNA see my laptop?

A common issue is a conflict with the Windows Firewall. Add a port exception. 1900/TCP And 1900/UDP, as well as for the server program (for example, Serviio). Also check that both devices are on the same subnet (the first three digits of the IP address must match, for example, 192.168.1.x).

4. Method 3: AirPlay for MacBook and iPhone

If you have MacBook or iPhone, can be used AirPlay - technology from Apple for wireless content transmission. However, not all TVs Hisense support it out of the box. This requires either a built-in module AirPlay 2 (available on 2020 and newer models), or an external device such as Apple TV.

How to check AirPlay support on Hisense:

  • Go to Settings → Apple AirPlay (if there is no item, your TV does not support the technology).
  • In models Hisense U7 And U8 (2021–2023) AirPlay 2 included in Settings → Wireless → Apple AirPlay and HomeKit.

Connecting with MacBook:

  1. Make sure both devices are connected to the same Wi-Fi network.
  2. On MacBook open System Preferences → Monitors.
  3. Click on the drop-down menu Connecting to AirPlay and select your TV Hisense.
  4. If necessary, enter the PIN code that appears on the TV screen.

If AirPlay doesn't work:

  • 🔄 Reboot your router—sometimes it blocks multicast traffic Apple.
  • 🛠️ Update your TV firmware (in the menu Settings → Support → Software Update).
  • 📡 Check that your router supports the standard 802.11ac (old models on 802.11n may not be able to handle the data flow).

5. Method 4: Hisense proprietary software - Anyview Cast

For TVs Hisense 2019 and newer technology available Anyview Cast - analogue Miracast, but with improved stability. It works with both Windows, and with Android/iOS.

How to enable Anyview Cast:

  1. On the remote control Hisense press the button SOURCE (or INPUT).
  2. Select Anyview Cast (in some models - Screen Mirroring).
  3. A QR code and the network name will appear on the screen (for example, Hisense_Cast_XXXX).

Connection from a laptop:

  • 🖥️ Windows: use a combination Win + K and select the network Hisense_Cast_XXXX.
  • 🍎 MacBook: install the program Anyview Cast from the official website Hisense.
  • 🤖 Android: in the screen settings, select Wireless Display.

Advantages Anyview Cast:

  • ⚡ Less latency compared to DLNA.
  • 🎮 Game controller support (relevant for cloud gaming).
  • 🔒 Encrypted connection (unlike the standard one) Miracast).
What should I do if Anyview Cast doesn't find my laptop?

The problem may be in your router settings. Disable this feature. "Smart Connect" (combine 2.4 GHz and 5 GHz into one network) and connect both devices to the same frequency (better 5 GHz for stability).

6. Method 5: Via a router with Wi-Fi/Miracast functionality

If your TV Hisense does not support Miracast directly, but you have a modern router (for example, ASUS RT-AX88U or Xiaomi AX6000), you can use it as an intermediary. Some routers can retransmit the signal. Miracast to devices on the network.

How to set up a router for Miracast:

  1. Go to the router's web interface (usually at 192.168.1.1).
  2. Find the section "Wireless Mode" → "Miracast" or "Widi".
  3. Enable the function and save the settings.

Connecting a laptop:

  1. On a laptop, press Win + K.
  2. The name of your router will appear in the list of devices (for example, ASUS-Miracast).
  3. Select it and confirm the connection.
  4. On the TV in the menu SOURCE select Miracast or Screen Mirroring — the image from the laptop should appear.

Limitations of the method:

  • 📉 Delays of up to 1–2 seconds are possible (due to double data transfer: laptop → router → TV).
  • 🔌 Not all routers support this feature (check the specifications of your model).

7. Technology compatibility table with Hisense models

To save time experimenting, use the compatibility chart. Please note: support depends not only on the model but also on the firmware region (European and Asian versions may differ).

Hisense model Miracast DLNA AirPlay 2 Anyview Cast Notes
Hisense A6K (2020–2021) ✅ ✅ (with a bug on TP-Link) ❌ ✅ DLNA firmware required
Hisense U7/U8 (2021–2023) ✅ ✅ ✅ ✅ The best AirPlay support among Hisense models
Hisense H8/H9 (2018–2019) ✅ (5 GHz only) ✅ ❌ ❌ Miracast is unstable
Hisense A4 (2017 and later) ❌ ✅ ❌ ❌ Only DLNA via third-party servers

If your model is not in the table, check its specifications on the official website. Hisense Or in the instructions. Pay attention to the year of manufacture—models before 2017 often lack wireless features.

8. Common mistakes and their solutions

Even with proper setup, problems can still arise. We've compiled the most common errors and how to fix them.

Error: "Device not supported"

  • 🔧 Check if your laptop supports it Miracast (through dxdiag).
  • 📋 Update your graphics card drivers (especially for Intel UHD Graphics).
  • 🔄 Restart your router—sometimes it blocks multicast traffic.

Error: "No signal" or black screen

  • 🔌 Try changing the screen resolution on your laptop to 1920×1080 with frequency 60 Hz.
  • 🛠️ Disconnect the second monitor (if connected) - sometimes it interferes Miracast.
  • 📡 Reconnect to the Wi-Fi network at the frequency 5 GHz (less busy).

Error: There is sound, but no image.

  • 🔊 Check if it is disabled in the settings Miracast on TV parameter Video Transfer.
  • 🖥️ On your laptop, in the display settings, select the mode "Duplicate" instead of "Expand".

Error: Image lag

  • 🎮 In the settings Miracast On your laptop, select the mode "Game".
  • 📶 Connect to the router via cable (laptop via Ethernet, TV via Wi-Fi).
  • 🔄 Reduce the broadcast resolution to 1280×720.

⚠️ Attention: On TVs Hisense with firmware Vidaa U5 (2022) After the update, support may disappear DLNAIn this case, rolling back to the previous version of the software or using Anyview Cast.

FAQ: Answers to Frequently Asked Questions

Is it possible to connect a laptop to Hisense without Wi-Fi (only via cable)?

Yes, use it for this HDMI cable. Your laptop may require an adapter (for example, USB-C → HDMI For MacBook). A high-quality cable connection provides lower latency and a more stable image, but it does reduce mobility.

Why does the image lag when connecting via Miracast?

The reasons may be different:

  • Weak Wi-Fi signal (check the distance to the router or go to 5 GHz).
  • Network congestion (disconnect other devices downloading files).
  • Poor laptop performance (close background programs).

Try reducing the broadcast resolution to 1280×720.

How to connect a Linux laptop to Hisense?

For Linux will fit:

  • Miracast: install the package wl-display and use the command 
    weston --backend=wayland-backend.so --shell=ivi-shell.so
  • DLNA: install Rygel or MiniDLNA for distributing media files.

For Anyview Cast an emulator may be required Android (For example, Waydroid).

Can I control my laptop with a Hisense remote control?

No, the remote control Hisense can't control the laptop. However, you can:

  • Connect a wireless keyboard/mouse to your laptop.
  • Use the app Unified Remote for control from a phone.
How do I stream audio from my laptop to my Hisense separately from video?

To do this:

  1. On Windows: open Sound Settings → Output → Select Hisense TV.
  2. On macOS: V System Preferences → Sound → Output select Hisense-AirPlay.

If the sound is delayed, try disabling sound effects in your laptop settings.

📖 Read also

Setting up TV channels via Wi-Fi on LG: A complete guide Step-by-step instructions for setting up digital channels on an LG TV via the internet. Troubleshooting Wi-Fi on TV without Internet: 10 ways to fix the problem Is your TV connected to Wi-Fi, but the internet isn't working? Find out why this is happening and how to get it working again. How to connect to Wi-Fi on Lastochka: full instructions A step-by-step guide to connecting to free Wi-Fi on Lastochka trains. Troubleshooting access issues Why Your TV Won't Connect to Wi-Fi: Causes and Solutions Is your TV not detecting Wi-Fi or dropping the connection? A full breakdown of the causes and step-by-step setup instructions. How to connect digital TV to a Smart TV via Wi-Fi: instructions A step-by-step guide to setting up digital television on a Smart TV via a wireless network. Solutions Why the TV doesn't detect Wi-Fi: causes and solutions TV stopped detecting Wi-Fi? We'll explore 10 reasons for the failure, driver errors, router settings, and solutions.