How to connect Wi-Fi to a Samsung laptop: instructions with pictures and tips

Laptops Samsung — a popular choice among users due to its combination of performance and design. However, even with modern models (Galaxy Book Pro, Notebook 9, Odyssey) Sometimes difficulties arise when connecting to a wireless network for the first time. This article will help you figure out how to set it up correctly. Wi-Fi on a Samsung laptop regardless of the operating system, and also solve typical connection problems.

We'll cover not only the basic steps for enabling the adapter and searching for networks, but also nuances often overlooked in standard instructions. For example, why a laptop might not detect a 5 GHz network, how to update drivers without internet access, or what to do if Windows 11 suddenly forgets a saved password. We'll also pay special attention to the features of the series. Samsung Galaxy Book, where the connection process may differ due to proprietary software.

If you've just purchased a laptop or are experiencing issues after a system update, this guide will save you time. All steps are illustrated with screenshots of current OS versions (as of 2026), and troubleshooting tips are based on an analysis of frequent support requests. Samsung.

1. Preparing your Samsung laptop for Wi-Fi connection

Before searching for networks, make sure your laptop is technically ready for a wireless connection. Let's start with checking hardware Wi-Fi switch - many models Samsung (especially business series) are equipped with a physical button or key combination to turn on the adapter.

On most devices this is a combination Fn + F12 (or F2, depending on the model). The wireless network icon on the key is usually illuminated blue or orange - If the indicator is not lit, press the combination again. Samsung Galaxy Book Flex And Book Ion You can use the touchpad to the right of the touchpad - swipe up on it to activate Wi-Fi.

Also check Wi-Fi indicator status On the case (usually near the keyboard or on the front panel). A blinking orange light means the adapter is powered on but not connected to the network; a steady blue light means the connection is active. If the light doesn't light at all, the problem may be with the drivers or a disabled adapter in the BIOS.

• 🔧 Check BIOS: when booting the laptop, press F2 (or Del), find the section Advanced → Wireless and make sure that the parameter Wireless LAN installed in Enabled.
• 🔋 Charger: some models Samsung Disable the Wi-Fi adapter when the battery level is low (less than 5%). Connect the laptop to the network.
• 🛠️ Proprietary software: on devices with pre-installed Samsung Settings (For example, Galaxy Book Pro 2) check the section Network → Wireless Networks.

2. Step-by-step instructions: connecting to Wi-Fi in Windows 10/11

Connection algorithm on laptops Samsung The process is standard for Windows, but there are some nuances associated with proprietary utilities. Let's look at the process for both OS versions.

For Windows 11:

1. Open Start → Settings (⚙️) → Network & Internet.
2. Select a tab Wi-Fi and move the slider to the position "On".
3. Find your network in the list of available networks, click on its name and enter the password.
4. Check the box Connect automatically and press Next.

For Windows 10:

1. Click on the network icon in the lower right corner (next to the clock).
2. In the menu that opens, select the desired network and click Connect.
3. Enter the password and confirm the connection.

On laptops Samsung Galaxy Book (2021 and newer) After connecting, a pop-up window may appear prompting you to install Samsung Wi-Fi — a proprietary utility for optimizing connections. Its installation is optional, but it's useful for stabilizing the signal in crowded networks (for example, in offices or on college campuses).

⚠️ Attention: If an error appears after entering the password "Unable to connect to this network", try manually specifying the security standard. To do this, select Advanced options → Forget network, then reconnect and manually select the security type (WPA2-PSK or WPA3-PSK).

3. Connection Features on Samsung Laptops with Linux

Laptops Samsung They don't officially come with Linux pre-installed, but many users install distributions like Ubuntu or Fedora independently. In this case, problems with Wi-Fi adapter drivers may arise, especially on newer models with chips Intel AX200/AX210 or Qualcomm Atheros.

For most distributions, the connection process looks like this:

1. Click on the network icon in the upper right corner (for GNOME or KDE).
2. Select the desired network from the list and enter the password.
3. If the network is not listed, check the adapter status using the command:

   ip a

   Look for an interface like wlp3s0 (wireless). If it's not there, the driver isn't loaded.

To install drivers on Ubuntu/Debian execute:

sudo apt update
sudo apt install firmware-iwlwifi

For Fedora:

sudo dnf install iwl*-firmware

On laptops Samsung Notebook 9 (2018) and older may need to be disabled Secure Boot in the BIOS, as it blocks the loading of proprietary drivers. This can be done in the section Boot → Secure Boot → Disabled.

4. Troubleshooting: Samsung laptop won't connect to Wi-Fi

If the connection still fails after all these steps, use these diagnostic instructions. Let's start with the most common causes.

4.1 The laptop does not see the network

• 🔍 Check your router: reboot it (turn off the power for 30 seconds). On some models Samsung (For example, Galaxy Book Flex2) the adapter does not detect networks with a hidden SSID - enable network visibility in the router settings.
• 🔄 Reset network settings: In Windows, run the following in the command line (as administrator):

  netsh winsock reset
  netsh int ip reset

  Then restart your laptop.

• 🛠️ Updating drivers: Download the latest version from the website Samsung Support (chapter Downloads → Drivers → Wireless Network). For Galaxy Book Search for drivers by exact model (for example, NP950XDG-KA1RU).

4.2. Connection drops or speed is slow

If your laptop connects, but the speed is lower than expected (for example, instead of 300 Mbps it shows 50 Mbps), follow these steps:

1. Check the network standard in the router settings: for maximum speed, select 802.11ac (Wi-Fi 5) or 802.11ax (Wi-Fi 6).
2. Disable power saving for your Wi-Fi adapter:
   1. Open Device Manager → Network Adapters.
   2. Find your Wi-Fi adapter (e.g. Intel Wi-Fi 6 AX200), open Properties → Power Management.
   3. Uncheck the box Allow the computer to turn off this device to save power.
3. Change the Wi-Fi channel in the router settings (recommended) 36-48 for 5 GHz or 1-11 for 2.4 GHz).

⚠️ Attention: On laptops Samsung Odyssey (2021) There is a known issue with drivers Qualcomm Atheros, due to which the speed is limited to 72 Mbps. The solution is to install the driver manually from official source of Qualcomm, choosing the version for Windows 10/11 (even if you have Windows 11).

5. Setting up Wi-Fi on Samsung laptops with macOS (via Boot Camp)

Some users install macOS on laptops Samsung through Boot Camp or virtual machines. In this case, Wi-Fi may not work due to missing adapter drivers. Intel or Broadcom.

To solve the problem:

1. Download Boot Camp Support Software for your model from the website Samsung (chapter Support → Software and Drivers).
2. Install the package BrcmPatchRAM for adapters Broadcom:

   brew install --cask brcmpatchram

   (required) Homebrew).

3. For adapters Intel use itlwm:

   git clone https://github.com/OpenIntelWireless/itlwm
   cd itlwm
   make && sudo make install

After installing the drivers, restart your laptop. macOS Ventura and newer may need to be disabled System Integrity Protection (SIP), what is done through Recovery Mode (team csrutil disable in the terminal).

6. Security: How to secure your connection on a Samsung laptop

Once you've successfully connected to Wi-Fi, it's important to secure your connection, especially if you're using your laptop in public places. Laptops Samsung Windows 11 has built-in tools for this.

• 🔒 Disable automatic connection to open networks:
  1. Go to Settings → Network and Internet → Wi-Fi.
  2. Select Managing known networks.
  3. For each open network (eg. Starbucks_WiFi) click Forget.

Samsung Galaxy Book Pro 2 (2022+) laptops support hardware disk encryption via Samsung Knox, but it doesn't protect traffic on open networks. Always use HTTPS websites (check the 🔒 icon in your browser's address bar).

7. Alternative ways to connect to the Internet

If connecting via Wi-Fi is not possible (for example, the adapter is broken), laptops Samsung support several alternative methods of accessing the Internet:

• 📶 Mobile hotspot: Connect your laptop to your smartphone via USB or Bluetooth. Samsung Galaxy turn on Modem mode in the connection settings.
• 🔌 Ethernet adapter: for models without an RJ-45 port (e.g. Galaxy Book Flex) use USB-C to Ethernet adapter (models on a chip are recommended) Realtek RTL8153).
• 📡 4G/5G modem: laptops Samsung with support eSIM (For example, Galaxy Book2 Pro 360) can connect to the mobile Internet directly through Settings → Network & Internet → Coellular.

To connect via USB modem (For example, Huawei E3372):

1. Connect the modem to the USB port of the laptop.
2. Wait for the drivers to install automatically (in Windows 11 this takes 1-2 minutes).
3. Open Settings → Network & Internet → Coellular and set up a new connection.

⚠️ Attention: When using USB modem on laptops Samsung Notebook 9 (2017-2019) may need to be disabled USB Selective Suspend in the power settings, otherwise the modem will turn off after 5-10 minutes of inactivity.

FAQ: Frequently asked questions about Wi-Fi on Samsung laptops

🔹 Why does my Samsung laptop connect to Wi-Fi, but the internet doesn't work?

There may be several reasons:

1. DNS issues: try manually entering Google's DNS (8.8.8.8 And 8.8.4.4) in the adapter settings.
2. Blocked by antivirus: temporarily disable Windows Defender or a third-party antivirus.
3. Router limitations: check if it is enabled on the router MAC filter or Parental Control.

Also on some models Samsung (For example, Galaxy Book Ion) resetting the TCP/IP stack helps:

netsh int ip reset c:\resetlog.txt

🔹 How to connect to a hidden Wi-Fi network on a Samsung laptop?

To connect to a network with a hidden SSID:

1. Open Settings → Network & Internet → Wi-Fi → Manage known networks.
2. Click Add a new network.
3. Enter the network name (SSID), select the security type (WPA2-Personal) and enter the password.
4. Check the box Connect automatically.

On Linux use the command:

nmcli dev wifi connect "NETWORK_NAME" password "PASSWORD" hidden yes

🔹 Can I use my Samsung laptop as a Wi-Fi hotspot?
Yes, for this:
1. Open Settings → Network & Internet → Mobile Hotspot.
2. Select an internet source (eg. Ethernet or Soellular).
3. Click Changeto set the network name and password.
4. Activate the option Allow use of my internet connection.

On Linux use the command:

sudo nmcli dev wifi hotspot ifname wlp3s0 ssid MyHotspot password "12345678"

(replace wlp3s0 to your wireless interface).

sudo rm /etc/NetworkManager/system-connections/*
sudo systemctl restart NetworkManager