Setting up a wireless office or comfortable home workspace starts with getting rid of unnecessary wires. Samsung M2070 MFP This is a popular model that allows you to scan and print documents, but users often encounter difficulties setting up the initial WiFi connection. Unlike modern touchscreen models, this series requires precise steps to ensure proper network operation.
The main difficulty is that the device doesn't have a full-fledged interface for entering the router password directly on the device itself. You'll need to temporarily use a USB cable or the WPS method to transfer network settings. After successful configuration, Samsung M2070 will become available to all computers on the local network, which will significantly simplify collaboration.
In this article, we'll cover every step of the connection process, from preparing the equipment to setting up a static IP address to ensure the printer doesn't disappear from the system after a router reboot. You'll learn how to properly install drivers and which network settings are critical for a stable connection between your laptop and printer.
Preparatory stage and compatibility check
Before you begin software configuration, you need to make sure that your hardware is physically ready. Make sure that your router It operates in 2.4 GHz mode, as most budget MFPs, including the M2070, do not support the 5 GHz band. If you have a dual-band router, temporarily separate the networks or use guest mode for the old frequency.
You will also need the USB cable itself, which is usually included in the package, but only for the initial setup period. Laptop The router must be in a strong signal reception area, and ideally, in the same room as the router during the pairing process. Download the latest driver package. Unified Driver from the official website, as the versions included in the kit may be outdated.
⚠️ Important: Before installing the drivers, be sure to disable your antivirus and Windows Firewall. They may block network ports needed for the printer to be detected on the local network.
WPS Method: Quick Connection Without a Cable
The easiest way to knit Samsung M2070 With WiFi, use WPS technology if your router supports it. This method automatically transmits the password, eliminating the need to manually enter it on your computer. Find the WPS button on the router and press it.
Within two minutes, press and hold the WiFi button on the MFP control panel until the wireless network indicator starts blinking. The device will automatically find the network and establish a connection. If the indicator turns solid blue or green, then IP address successfully received from the DHCP server.
- 📶 Press the WPS button on the router.
- 🖨️ Hold the WiFi button on the MFP for 2-3 seconds.
- ⏳ Wait until the indicator stops flashing.
- 💻 Install the driver by selecting the "Wireless connection" option.
It's worth noting that the WPS method doesn't work with all router models, especially if the router's firmware has security restrictions. In such cases, the system may request a PIN, which must be entered in the router's interface. If automatic pairing fails, proceed to manual setup via USB.
Setup via USB cable and installation wizard
If WPS doesn't work, the most reliable option is to use a USB cable to transfer network settings. Run the driver installer. Samsung Unified Driver and select the "Wireless Network Connection" connection type. The program will prompt you to connect a cable and then begin searching for the device.
During the installation process, the setup wizard will ask you to select your WiFi network from the list of available ones. Enter your router password in the appropriate field. The program will then transfer the configuration to MFP Sec printer module. When the process is complete, the installer will prompt you to disconnect the USB cable.
☑️ Checking USB connection
It is important not to interrupt the data transfer process. If you disconnect the cable prematurely, network settings may not be saved in the device's non-volatile memory. After disconnecting the cable, the printer should automatically enter network command mode.
Manually configure IP address and network settings
For stable operation in an office or home, where the network configuration often changes, it is recommended to assign static IP addressBy default, the printer receives an address dynamically, and after rebooting the router, it may change, which will lead to loss of connection with the computer.
Use the utility Network Configuration Tool, which is installed along with the drivers. Launch the program, find your device in the list, and go to TCP/IP properties. Here, uncheck "Obtain an IP address automatically" and enter the address manually.
Example of setting up a static IP:IP Address: 192.168.1.150
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Make sure the address you select is on the same subnet as your laptop, but not within the range of addresses distributed by the router's DHCP server. This will prevent IP address conflict, when two devices try to occupy the same space on the network.
How do I find out the DHCP range on my router?
Log into your router's web interface (usually 192.168.0.1 or 1.1) and find the LAN or DHCP Server section. It displays an address range, such as 100 to 200. Select a static address outside this range, such as 250.
Samsung M2070 Basic Network Parameters Table
To ensure proper operation of the device, it is necessary to understand the key network parameters. Below is a table with recommended values to help you properly configure the connection between laptop and a printer.
| Parameter | Description | Recommended value |
|---|---|---|
| SSID | Wireless network name | No spaces or special characters |
| Security | Encryption type | WPA2-PSK (AES) |
| IP Address | A unique address on the network | 192.168.xx (static) |
| Port | Print port | 9100 (Standard) |
Pay attention to the encryption type. Older printer models may not support the latest security standards. WPA3If the connection fails, try temporarily switching the router to WPA2/WPA Mixed compatibility mode.
⚠️ Note: Router and operating system interfaces are constantly being updated. The layout of menu items may differ from those described. Always consult the documentation for your specific router model.
Installing drivers and adding a print port
After setting up the network, you need to make sure the operating system sees the device correctly. Go to the printer control panel and select "Add a printer." If the automatic search does not return any results, click "The printer I want isn't listed" and select "Add by" TCP/IP address.
Enter the static IP you assigned earlier. The system will attempt to detect the device type. Samsung M2070 It is important to select the correct port. In the port properties, make sure the protocol is selected. Raw and the port 9100.
- 🖥️ Open "Devices and Printers" in Windows.
- ➕ Click "Add a printer".
- 🌐 Select "Add a printer by TCP/IP address".
- ⚙️ In the port settings, specify the Raw protocol and port 9100.
If Windows prompts you to select a driver from a list, click "Have Disk" and specify the path to the previously downloaded files. Unified DriverThis ensures that all scanning and toner monitoring functions are available.
Diagnostics and solution
Even with proper configuration, situations may arise where the printer becomes unavailable. Often, the issue stems from changes in router settings or a Windows security update. First, check if the device can be pinged over the network.
Open command prompt and enter the command ping 192.168.1.150 (insert your IP address). If there's no response, check if the WiFi indicator on the MFP is lit. If the indicator is blinking, the device has lost connection to the router. Try rebooting both devices.
It's also worth checking your firewall. Sometimes antivirus programs block incoming connections for print drivers. Add an exception for the process. Spooler or the entire range of addresses on your local network.
What should I do if my computer doesn't see the printer after rebooting?
Most likely, the IP address has changed if you didn't set a static one. Check the client list on your router, find the printer by its MAC address (indicated on the sticker on the back), and find the new IP address. Update the print port in the printer properties to the new address.
Can the Samsung M2070 be connected to 5GHz WiFi?
No, the WiFi module in the M2070 model only supports the 802.11 b/g/n standard at 2.4 GHz. To connect to a dual-band router, make sure the 2.4 GHz network is broadcast.
How do I reset my printer's network settings?
Turn off the printer. Press and hold the "WPS" and "Stop" buttons (or the combination specified in the manual for your revision) and turn on the power. Hold for a few seconds until the configuration report prints.
Why doesn't the scanner work over the network?
The Scan to PC feature requires the Samsung Scanner utility to be running on your computer. If it's closed, the scan command from the printer's control panel won't be processed. Please add the program to startup.