How to connect the Brother MFC-L2700DWR printer to Wi-Fi: 3 proven methods + troubleshooting

Multifunctional device Brother MFC-L2700DWR — a popular model for home and small offices, combining printing, scanning, and copying with wireless technology support. However, connecting to Wi-Fi often presents difficulties: the printer fails to find the network, requires confusing settings, or refuses to print after connecting. This article will help you understand the nuances of setup. wireless connection For MFC-L2700DWR, including alternative methods and diagnostics of common problems.

We will look at three main ways to connect: via printer control panel, using WPS (if your router supports this function) and through Brother web interfaceWe'll pay special attention to network security settings, as they're the ones that most often block connections. For those who've already tried connecting and received an error, we've prepared a section with unique error codes and how to troubleshoot them.

Before you begin, make sure your router is working properly and your printer is turned on and within range. If you're using dual-band Wi-Fi (2.4 and 5 GHz), MFC-L2700DWR supports only 2.4 GHz - this is critical for a successful connection.

1. Preparing to connect: checking the network and printer

Before setting up Wi-Fi on Brother MFC-L2700DWR You need to make sure your network meets the device's requirements. The printer supports security standards. WPA2-PSK (AES) And WPA3-PSK, but there may be a conflict with some router settings.

Here's what you need to do before connection:

• 📶 Check that the router is broadcasting a network in the range 2.4 GHz (the printer does not work with 5 GHz). If you have a combined network (one SSID for both bands), temporarily separate it in the router settings.
• 🔒 Make sure your network encryption type is WPA2-PSK or WPA3-PSKOpen the router's web interface (usually at 192.168.0.1 or 192.168.1.1) and check your security settings.
• 📡 Disable the router's features MAC filtering And Client isolation - They can block the connection of new devices.
• 🔄 Restart the printer and router: turn off both devices for 30 seconds, then turn on the router first, and after 1-2 minutes, the printer.

If your router uses hidden SSID (doesn't broadcast the network name), you'll have to temporarily disable this feature or enter the network name manually on the printer. Also, make sure DHCP is enabled in your router's settings. automatic assignment of IP addresses - this will simplify the connection process.

⚠️ Please note: Some providers (eg. Rostelecom or Beeline) by default, protection against new device connections is enabled. If the printer doesn't see the network, check the "Protected Network" or "Device Control" settings in your provider's personal account.

2. Method 1: Connecting via the printer control panel

The most direct method is to set up Wi-Fi directly from the screen MFC-L2700DWRThis method is suitable if the printer is not yet connected to the network and you have access to its control panel.

Step-by-step instructions:

1. Click the button Menu on the printer panel.
2. Go to the section Network → WLAN (use arrows to navigate).
3. Select Setup Wizard (Setup Wizard). The printer will begin searching for available networks.
4. Find your network name in the list (SSID) and select it. If the network is not listed, check that the router is broadcasting 2.4 GHz.
5. Enter your Wi-Fi password using the arrows and button OKPlease note: the printer is case-sensitive and sensitive to special characters.
6. Confirm your entry. The printer will attempt to connect to the network and obtain an IP address.

If the connection is successful, a check mark or message will appear on the screen. ConnectedTo make sure the printer is actually online, print network settings report:

• Go to Menu → Network → WLAN → Print Report.
• Check the lines in the report SSID, IP Address And Status.

⚠️ Attention: If the printer asks AUTH ERROR When entering your password, you most likely made a character error. Try re-entering the password or check it in your router settings. Also, make sure that keyboard layout is not enabled. Caps Lock on the printer (if there is one).

2.4 GHz band checked|MAC filtering disabled|Wi-Fi password at hand|Printer rebooted-->

3. Method 2: Quick connection via WPS

If your router supports the technology WPS (Wi-Fi Protected Setup), connection MFC-L2700DWR It'll take less than a minute. This method is convenient when you don't want to enter your password manually or are worried about making a character error.

How to connect via WPS:

1. Make sure the WPS indicator on your router is lit (usually indicated by a 🔄 or WPS).
2. On the printer, press and hold the button Wi-Fi (with the antenna icon) for 3 seconds until the wireless indicator flashes.
3. For 2 minutes press the button WPS on the router. It's usually located on the back panel.
4. Wait until the Wi-Fi indicator on the printer stops blinking and remains on continuously—this means the connection is established.

If the connection fails:

• 🔄 Repeat the process while holding the button WPS on the router longer (sometimes it takes 5-10 seconds).
• 📡 Check that your router isn't overheating—some models block WPS at high temperatures.
• 🔒 Make sure that WPS is enabled in the router settings (section Wi-Fi → WPS).

The advantage of this method is that there is no need to enter a password. However, WPS is considered less secure, than manually entering the password, so after connecting the printer, it is recommended to disable WPS on the router.

4. Method 3: Setup via Brother web interface

If the first two methods didn't work or you need more flexible control over your settings, use printer web interfaceTo do this, temporarily connect MFC-L2700DWR to the computer via USB.

Instructions:

1. Connect the printer to your PC or laptop using USB cables (included in the kit).
2. Download and install drivers from Brother's official website (select model MFC-L2700DWR and your OS).
3. Run the utility Brother iPrint&Scan or open a web browser and enter the address http://192.168.1.1 (If the printer does not respond, check its IP in the network settings report).
4. In the web interface, go to the section Network → WLAN and select Manual Setup.
5. Enter SSID (network name) and password. Save the settings.
6. Disconnect the USB cable and restart the printer. It should automatically connect to Wi-Fi.

This method is useful if:

• 🖥️ You prefer to configure devices via a computer.
• 🔧 You need to set a static IP address for the printer (useful in office networks).
• 📊 Additional parameters need to be checked, for example, DNS or Proxy.

⚠️ Attention: If after setting up via the web interface the printer still does not connect, check if it is blocked built-in router firewallIn the router settings, find the section Firewall or Access Control and add the printer's MAC address to the list of allowed devices.

5. Typical errors and their elimination

Even with the correct settings Brother MFC-L2700DWR may return connection errors. Below is a table of the most common problems and solutions.

If the error is not listed in the table, try reset the printer's network settings:

1. Click Menu → Network → Reset Network.
2. Confirm reset (the printer will reboot).
3. Try connecting to Wi-Fi again using any of the methods described above.

What should I do if my printer is connected to Wi-Fi, but my computer can't see it?

If your printer is successfully connected to the network (the Wi-Fi light is solid) but does not appear in the list of printing devices, follow these steps:

1. On your computer, open Control Panel → Devices and Printers.

2. Click Add a printer and select Add a network, wireless, or Bluetooth printer.

3. If the printer is not found automatically, click The printer you need is not in the list and enter its IP address manually (you can find out the IP from the printer's network settings report).

4. Install the drivers if the system requests them.

6. Additional settings for stable operation

After successful connection MFC-L2700DWR It is recommended to optimize Wi-Fi settings to prevent connection drops and speed up printing.

What can be done:

• 📌 Assign a static IP address printer in the router settings (section DHCP → Address Reservation). This will prevent IP conflicts when devices reboot.
• 📡 Disable Wi-Fi power saving on the printer: go to Menu → Network → WLAN → Sleep Mode and select Off.
• 🔄 Update your printer firmwareGo to . Menu → Initial Setup → Firmware Update and follow the instructions. The latest firmware fixes connection errors.
• 🖨️ Set up cloud printing (if necessary). Install the application Brother iPrint&Scan to your smartphone for printing from mobile devices.

If you use the printer in an office with a lot of devices, consider allocating a separate Wi-Fi channel For MFC-L2700DWRThis will reduce printing delays. To do this:

1. Enter your router settings.
2. Find the section Wi-Fi → Basic Settings.
3. Set a fixed channel (eg. 6 or 11) instead of Auto.
4. Save the settings and reboot the router.

7. Connect to Wi-Fi from your phone or tablet

Tune Brother MFC-L2700DWR You can also use it from a mobile device - you'll need the official app for this. Brother iPrint&Scan (available for Android And iOS).

Step-by-step instructions:

1. Download and install the application from Google Play or App Store.
2. Turn on Wi-Fi on your phone and connect to the same network you want to connect the printer to.
3. Launch iPrint&Scan and press Add a printer.
4. Select Printer Setup → Wireless Network.
5. Follow the on-screen instructions: the app will automatically find the printer and prompt you to enter the Wi-Fi password.
6. Once connected, check the printer status in the main menu of the application.

The advantages of this method:

• 📱 Convenient for users who do not have access to a computer.
• 🔍 The app automatically diagnoses connection problems.
• 🖼️ You can immediately test printing photos or documents from your phone.

⚠️ Attention: When setting up via a mobile app, make sure that the phone is turned off modem mode (Internet sharing). Otherwise, the printer may try to connect to your phone's access point instead of your router.

FAQ: Frequently asked questions about connecting the MFC-L2700DWR

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

Please check the following points:

1. Are the printer drivers installed on your computer (download from the Brother website).
2. Is the computer on the same network as the printer (for example, not connected to the router's guest network).
3. Is the printer enabled as the default printer in Windows printing settings (Control Panel → Devices and Printers).
4. Is your firewall or antivirus blocking access to the printer? (Temporarily disable protection to check.)

If nothing helps, add the printer manually by IP address (you can find it in the network settings report).

Is it possible to connect a printer to Wi-Fi without a display (if the screen is not working)?

Yes, there are two options:

1. Via USB: Connect the printer to the computer with a cable and set up Wi-Fi via the web interface (http://192.168.1.1) or utility Brother iPrint&Scan.
2. Via WPS: If your router supports WPS, press the WPS button on your router and then hold the button Wi-Fi on the printer for 3 seconds (even without a screen, the wireless network indicator should blink).

My printer keeps disconnecting from Wi-Fi. How can I fix this?

The reasons may be as follows:

• Weak Wi-Fi signal - move the printer closer to the router or install a repeater.
• Energy Saving - Disable Wi-Fi Sleep Mode in the printer settings (Menu → Network → WLAN → Sleep Mode → Off).
• IP address conflict - assign a static IP to the printer in your router settings.
• Interference from other devices - change the Wi-Fi channel in the router settings (select 6, 11 or 1 instead of Auto).

Does the MFC-L2700DWR support 5GHz connectivity?

No, this model only works in the range 2.4 GHzIf your router broadcasts both networks under the same name (SSID), the printer will not be able to connect. Solutions:

• Separate the networks in the router settings (create separate names for 2.4 GHz And 5 GHz).
• Turn off the broadcast 5 GHz temporarily to set up the printer.

How do I reset my printer's network settings to factory defaults?

To completely reset your Wi-Fi settings:

1. Click Menu → Network → Reset Network.
2. Confirm reset (the printer will reboot).
3. After rebooting, all network settings will be erased and you will be able to set up the connection again.

If the screen is not working, hold down the button Stop/Exit (red) for 10 seconds - this will perform a full reset of the printer.