How to connect a Meizu device to a TV via Wi-Fi: all the methods + troubleshooting

Wireless screen sharing with Meizu Connecting to a TV via Wi-Fi opens up a wealth of possibilities, from viewing photos on a big screen to streaming high-definition videos. However, many users encounter difficulties—the TV doesn't detect the smartphone, the connection constantly drops, or the picture lags. The most common cause is the wrong connection method or incorrect network settings.

In this article we will look at all current methods connections Meizu to TV via Wi-Fi - from standard Miracast to alternative protocols like DLNA And AirPlay (for TVs with support). We will pay special attention to signal optimization and solutions to common errors such as "no sound" or "frozen image." If your TV doesn't support modern standards, don't worry: workarounds using additional devices are provided at the end of the article.

Before you begin setting up, make sure that:

• 📱 Yours Meizu works on Flyme 9 or later (check in Settings → About phone). Older OS versions may not support Miracast.
• 📺 The TV is connected to the same Wi-Fi network as the smartphone (or is ready to Wi-Fi Direct).
• 🔄 Power saving modes are disabled on both devices - they can disconnect the connection.

1. Connecting via Miracast (native method for Meizu)

Miracast — is a wireless screen sharing standard supported by most modern Meizu (starting from Meizu 16 and newer) and Smart TV. Its main advantage is that there is no need for a router: devices connect directly via the protocol Wi-Fi Direct.

To activate Miracast on Meizu, follow these steps:

1. Open Settings → Connections → Wireless Screen Sharing (on some models the path may differ: Settings → Advanced → Screen Sharing).
2. Turn on the slider Wireless Display.
3. From the list of available devices, select the name of your TV (for example, Samsung TV (Miracast) or LG TV).
4. Confirm the connection on both devices. Your TV may require you to enter a PIN (usually displayed on the TV screen).

If your TV does not appear in the list, check:

• 🔍 The TV is in the "Sleep" mode Screen Mirroring (on Samsung — Settings → General → External devices → Screen Mirroring, on LG — Settings → Network → Miracast).
• 📶 Both devices are within range of each other (maximum 10 meters without obstacles).
• 🔄 On Meizu VPN and proxy are disabled - they may block the local connection.

Wi-Fi is enabled on your smartphone and TV|

Both devices are on the same network (or Wi-Fi Direct is activated)|

Screen Mirroring/Miracast mode is enabled on the TV|

Power saving modes are disabled-->

⚠️ Attention: On TVs Sony Bravia From 2020 to 2023, Miracast may not work reliably due to proprietary limitations. In this case, use Google Cast (if TV is on Android TV) or DLNA.

2. Using DLNA to transfer media files

DLNA (Digital Living Network Alliance) is a protocol for streaming photos, videos, and music from Meizu to your TV. Unlike Miracast, it doesn't broadcast the entire screen, but only selected files. It's suitable for watching movies or listening to music without lag.

To set up DLNA:

1. Make sure your TV supports DLNA (most Smart TVs do). Android TV, Samsung Tizen or LG webOS support).
2. On Meizu install a DLNA app, for example "BubbleUPnP" or "LocalCast" (available in Flyme App Store or Google Play).
3. Open the app, select the file to stream and click the button "Cast" (or similar). Your TV will appear in the list of devices.

Advantages of DLNA:

• 🎬 Supports formats MKV, MP4, FLAC without conversion.
• 📶 Works more reliably than Miracast even with a weak Wi-Fi signal.
• 🔄 You can control playback directly from your smartphone (pause, rewind).

⚠️ Attention: If the video is in 4K HDR It slows down when transferring via DLNA, try lowering the bitrate in the application settings or converting the file to 1080p. Budget segment TVs (for example, Xiaomi Mi TV 4S) may not be able to handle heavy formats.

3. Connecting via Google Cast (Chromecast)

If your TV is running on Android TV (For example, Sony A80J, Philips The One) or connected to the device Google Chromecast, you can use Google CastThis method allows you to broadcast both individual files and the entire screen (starting from Flyme 8.1).

Instructions:

1. Make sure the TV and Meizu connected to the same Wi-Fi network.
2. On your smartphone, open an app that supports Cast (e.g. YouTube, Google Photos or VLC).
3. Tap on the icon "Broadcast" (usually in the upper right corner) and select your TV.
4. To broadcast your entire screen, use the function Settings → Connections → Screencasting (required) Flyme 9+).

Google Cast Features:

• 🎮 Supports low-latency games (e.g. cloud gaming) GeForce NOW).
• 🔊 Sound is transmitted synchronously with video (unlike Miracast, where there are sometimes desyncs).
• 📱 Works even on older models Meizu (For example, Meizu Pro 6) through third-party applications like "Screen Mirroring for Chromecast".

4. AirPlay for Apple TVs and compatible models

AirPlay - protocol from Apple, but it can also be used on Meizu using third-party apps. This method is suitable for TVs. Apple TV 4K, as well as some Smart TVs with AirPlay 2 support (for example, LG OLED C2, Samsung QLED QN90C).

How to set up:

1. On your TV, turn on AirPlay in the settings (on LG: Settings → General → Apple AirPlay).
2. On Meizu install the application "AirScreen" or "ApowerMirror" from Flyme App Store.
3. Open the app, select your TV from the list and confirm the connection.

AirPlay restrictions on Meizu:

• 🚫 No support Dolby Vision And Atmos during broadcast.
• 🔋 High load on the smartphone battery (it is recommended to connect the charger).
• 📱Image lag can reach 200-300ms (not suitable for gaming).

Why might AirPlay not work on Meizu?

On some models Meizu (For example, Meizu 18 With Flyme 9.2) AirPlay is blocked at the system level. In this case, installing a custom kernel or using an app will help. "AirDroid Cast", which emulates AirPlay through its own servers.

5. Alternative methods: set-top boxes and adapters

If your TV does not support any of the listed protocols (for example, it is an older model without Smart TV), you can use additional devices:

• 📦 Android TV set-top box (For example, Xiaomi Mi Box S or Nvidia Shield): connects to TV via HDMI and supports Miracast, DLNA and Google Cast.
• 🔌 Wi-Fi adapter with Miracast (For example, Microsoft Wireless Display Adapter): plugs into the TV's HDMI port and creates an access point for connecting a smartphone.
• 🖥️ Mini-PC on Windows (For example, Intel NUC): you can connect to TV and use programs like "SpaceDesk" for screen duplication Meizu.

To connect via a set-top box:

1. Connect the set-top box to the TV via HDMI and set up its Wi-Fi connection.
2. On Meizu activate Miracast or Google Cast (depending on the set-top box firmware).
3. Select the set-top box from the list of available devices.

⚠️ Attention: Cheap Chinese Miracast adapters (for example, with AliExpress (for 500-1000 rubles) often have problems with support 5 GHz Wi-Fi And HEVC codecsBefore purchasing, check reviews for compatibility with Meizu.

6. Solving common problems

Even with proper setup, errors can still occur. Here are the most common ones and how to fix them:

If nothing helps, try:

• 🔄 Reset network settings on Meizu (Settings → System → Reset → Network reset).
• 📱 Update TV firmware (on Samsung: Settings → Support → Software Update).
• 🛠️ Install an alternative streaming app (e.g. "Screen Mirroring Shortcut" to bypass Flyme restrictions).

7. Optimize Wi-Fi for stable streaming

Streaming quality directly depends on the speed and stability of your Wi-Fi network. Here's how to improve your connection:

• 📶 Use 5 GHz instead of 2.4 GHz - less interference and higher speed (but shorter range).
• 🔗 Connect your TV to your router via cable (if supported), and Meizu leave it on Wi-Fi.
• 🚫 Disable the function on your router Smart Wi-Fi (Smart Connect), which automatically switches devices between frequencies.
• 📡 If the signal is weak, install Mesh system (For example, TP-Link Deco) or repeater.

Critical information: On routers ASUS RT-AX88U And TP-Link Archer C6 When streaming via Miracast, DDOS protection may be triggered, blocking the local connection. To fix this, disable the option in your router settings. AIProtection → Network Attack Blocking.

To check the connection speed between Meizu and TV:

1. Install the application on your smartphone "WiFi Analyzer".
2. Connect to the same network as your TV.
3. Check the signal level (should not be lower than -60 dBm) and channel (preferably 36–48 For 5 GHz).

FAQ: Frequently Asked Questions

Is it possible to connect Meizu to a TV without Wi-Fi?

Yes, but this will require HDMI adapter (For example, USB-C to HDMI For Meizu 18/19/20) or MHL cable (for older models with Micro-USB). Wireless methods without Wi-Fi don't work—even Wi-Fi Direct requires support for this protocol on both devices.

Why is there no sound when connecting via Miracast?

This is a typical problem when broadcasting to TVs. LG And SonySolutions:

1. Check if the sound on your smartphone is muted.
2. In the Miracast settings on Meizu select Transmit sound (if there is such a clause).
3. Use DLNA or Google Cast - they transmit sound more stably.

How to reduce lag when streaming games?

The delay depends on the protocol:

• Miracast: 100–200 ms (not suitable for shooters).
• Google Cast: 50–150 ms (suitable for strategies).
• Wired connection: 10–30 ms (ideal for gaming).

For minimal lag use Android TV box with a wired connection to a router or Steam Link (if you play through Steam).

Does Meizu 20 support AirPlay?

No, Meizu 20 (like other models on Flyme) does not have native AirPlay support. However, you can use third-party apps like "AirScreen" or "ApowerMirror", but they may not work stably due to limitations Flyme at the kernel level.

How to stream Meizu screen to TV via YouTube?

If you want to show a video with YouTube on TV:

1. Open the app YouTube on Meizu.
2. Tap on the icon "Broadcast" (in the upper right corner).
3. Select your TV from the list (must support Google Cast or DLNA).

If there is no broadcast icon, please update the app YouTube or use SmartTubeNext (alternative client for Android TV).