Integrating the Yandex Marusya voice assistant into your LG TV-based home theater opens up new control possibilities. Smart speaker Allows you to change channels, adjust volume, and play content without using the remote control. This is especially convenient when the remote is lost or your hands are full.
The setup process is based on connecting devices into a single ecosystem via a home network. Wi-Fi. For correct operation LG TV To use a voice assistant, both devices must be on the same local network. This ensures stable command transmission and minimizes system response delays.
Owners of modern Smart TV models can not only manage media, but also integrate smart homeThe system responds to voice commands, transforming ordinary movie watching into an interactive experience. However, proper initial hardware configuration is required to enable all features.
Hardware and software requirements
Before you start synchronization, make sure your hardware meets the minimum technical requirements. LG TVs, released after 2016 and running on the operating system webOS Versions 3.0 and above have the best compatibility. Older models may only support basic features or require an HDMI connection.
A stable internet connection is key. The router must support the standards. Wi-Fi 802.11n or newer (ac, ax). The connection frequency can be either 2.4 GHz or 5 GHz, but the 5 GHz range is preferred for voice control due to less interference.
You will also need an account in the Yandex ecosystem. No app authorization required. Yandex or Yandex Start TV skills cannot be activated. Please ensure the mobile device you'll be using for setup has the latest app update installed.
⚠️ Attention: If your router is configured to separate networks (client isolation), devices may not be able to see each other. Temporarily disable this feature in your router settings for initial setup.
Check your TV's firmware version. Manufacturers regularly release updates that improve the performance of network modules. Current firmware often contains fixes to communication protocols required to work with external smart speakers.
Preparing your home Wi-Fi network
The connection quality between Marusya and the TV directly depends on the wireless network configuration. The ideal situation is when both devices are connected to the same access point. If you have a dual-band router, try to ensure that both the speaker and the TV are connected. Smart TV worked in the same range.
Sometimes, devices are on different subnets due to guest access settings. Make sure the primary communication channel is open for both devices. This is critical for data transfer. control signals in real time.
- 📶 Check the signal level where the TV is installed - it should be at least two bars on the indicator.
- 🔒 Make sure the Wi-Fi password is entered correctly on both devices, without any extra spaces.
- 🔄 Restart your router before starting setup to clear the network connection cache.
IP address stability also plays a role. It's best if the router issues permanent addresses or has a large DHCP pool. IP address Because devices change frequently, the connection with the voice assistant may periodically be lost, requiring re-authorization.
Setting up an LG TV to receive commands
The first step in setting up your TV is to activate the necessary services. You need to go to the settings menu and select Settings → All settings → ConnectionHere you should make sure that the function LG Service IP or similar option for remote control is enabled.
Next, you need to activate pairing mode. Depending on the version webOSThe path may be labeled "Mobile Device Connector" or "TV Device Connector." The system should enter connection standby mode, which is usually indicated on the screen.
☑️ Preparing your TV for synchronization
An important step is installing or updating the application LG ThinQ (if using a bridge) or a built-in control service. Some models require connection confirmation on the TV screen. When prompted to allow access, select Allow or enter the code if it is displayed.
⚠️ Attention: Don't ignore pop-up windows requesting control permission. If you accidentally click "Decline," the TV will stop responding to external commands, and you'll have to reset the network settings again.
Once network services are successfully activated, the TV becomes visible to other devices on the local network. It's now ready for integration with external control systems, such as a voice assistant.
Integration via the Yandex app
The real magic happens in the Yandex app on your smartphone. Open the app and go to the section DevicesIf your Marusya speaker hasn't been added yet, click "+" and follow the instructions to add a new device to the network. Wi-Fi.
After adding the speaker, you need to set up the TV control skill. In the app menu, find the "Smart Home" section and press the "Plus" button to add a device. From the list of manufacturers, select LG or search for "LG ThinQ".
The system will ask you to log in to your LG account. Enter the same credentials you use to log in to your TV services. Once successfully logged in, your device lists will sync. TV should appear in the general list of available equipment.
What should I do if my accounts aren't syncing?
If an error occurs after entering your password, try logging out of your LG account on the TV (in your account settings) and logging back in. Then, in the Yandex app, delete the LG skill and add it again. Often, the issue is caused by an outdated authorization token.
Now you can assign devices to rooms. This is an important step, as it allows you to issue commands contextually. For example, the phrase "Marusya, turn on the TV" will be directed to the specific room where the device is located. Smart TV, if you are nearby or specify the name of the room.
Controlling your TV with your voice: features and commands
Once successfully set up, you gain access to a wide range of voice commands. Basic functionality includes power and volume control. You can say, "Marusya, turn off the TV" or "Marusya, turn up the volume," and the system will perform the action instantly.
More advanced commands allow you to control navigation. You can ask to change the channel, change the signal source, or launch a specific app if it's supported by the integration. Voice control especially effective for content search.
| Team | Action | Note |
|---|---|---|
| Turn on the TV | Activating Stand-by mode | Requires CEC support or an IR remote control in the speaker |
| Launch YouTube | Opening the application | Works on webOS 4.0 and later |
| Volume 20 | Setting the sound level | The exact value in percent |
| Switch to HDMI 2 | Changing the signal source | Depends on port numbering |
It's worth noting that some commands may require clarification. If you have multiple TVs, be sure to use the device name you specified in the app, for example: "Marusya, turn on TV in the living room"This will prevent equipment from being accidentally turned on in other rooms.
Alternative connection methods and HDMI-CEC
If a direct connection via Wi-Fi is not possible or is unstable, you can use the technology HDMI-CECThis protocol allows control signals to be transmitted via an HDMI cable. To do this, the speaker must have an IR port or be connected via a special adapter that supports CEC.
In the LG TV settings, find the section Settings → General → HDMI Control Devices (SIMPLINK) and activate it. This will allow Marusya, which controls the set-top box or the TV itself via HDMI, to transmit commands to turn on and switch inputs.
This method is advantageous because it doesn't overload the wireless network. However, its functionality may be limited to basic commands. HDMI-CEC Often used as a backup control channel when the Wi-Fi network is overloaded.
It's also possible to use IR adapters if your Marusya speaker model is equipped with an IR port (for example, some versions of the Yandex Station Mini). In the Yandex app, select the IR remote control setting and find it in the list. LG and test the buttons. After that, the speaker will be able to control the TV like a regular remote, but with your voice.
Solving common problems
Despite the ease of setup, users may encounter difficulties. One common issue is that the TV displays as "Offline" even though Wi-Fi is working. In this case, try changing the DNS servers in the TV's network settings to public ones, such as Google's (8.8.8.8).
If Marusya doesn't respond to commands, check if your TV is set to "Screen Only" mode or child lock, which could limit external controls. Also, make sure the speaker is set to latest voice profile.
⚠️ Attention: The webOS operating system and Yandex app interfaces are updated regularly. The location of menu items or function names may differ from those described in the instructions. Always refer to the current prompts on your device's screen.
If you lose connection completely, reset your TV's network settings. This will reset the network module to factory settings and often resolve software conflicts that may be interfering with your TV's operation. smart home.
Is it possible to control a TV without the Internet, only via a local network?
Full control via Marusya requires access to Yandex servers to process voice commands. Without an internet connection, the voice assistant won't be able to recognize your speech. However, using the IR port or HDMI-CEC, basic control is possible, but voice scenarios are not supported.
Why can't Marusya see my LG TV?
Most often, the devices are on different networks (for example, one on guest Wi-Fi, the other on the main Wi-Fi) or client isolation is enabled on the router. Also, check whether the antivirus or firewall on the router is blocking local communication between devices.
Does the control work if the TV is turned off?
The "Turn on TV" command only works if implemented via an IR port (like the one on a remote) or via the Wake-on-LAN protocol, which must be supported by the specific TV model and enabled in the power saving settings. Standard network control requires the TV to be in standby mode, not completely powered off.
Do I need to buy an additional remote control for LG?
No, you don't need an additional remote control to control it via Wi-Fi and voice commands. All functions are streamed over the network. An IR adapter is only needed if you want to use Marusya as a replacement for an IR remote control for very old models without Smart TV.