Why connect Marusya to an LG TV and what is needed for this?
Voice assistant Marusya from VKontakte has long ceased to be a purely mobile service. It can be used to control smart devices, including TVs. LG with support WebOS or Google AssistantConnection via Wi-Fi router Opens up new possibilities: voice-activated content search, volume control, and app launching—all without a remote. But how do you set up the connection correctly if the TV and speaker with Marusya can't directly see each other?
In this article we will look at two main scenarios: connecting via smart speaker (For example, Mini Capsule or Irbis A) and through a mobile application VKontakte on a smartphone. Both options require a stable Wi-Fi connections, so let's check your router settings first. If your TV LG Released before 2018, some features may be limited due to version WebOS and support for smart home protocols.
Before you begin, make sure that:
- 📶 The TV and the device with Marusya are connected to one Wi-Fi network (guest network is not suitable!).
- 🔄 The protocol is enabled on the router UPnP (needed for automatic port configuration).
- 📱 You have the latest update installed WebOS on TV and app VKontakte/Marusya on a smartphone.
- 🔌 If you use a smart speaker, it must be linked to your account VK.
Step 1: Checking the compatibility of your LG TV with Marusya
Not all models LG support integration with MarusyaBasic requirements:
- 📺 WebOS 3.5 and above (released since 2017). You can check the version in
Settings → General → About TV. - 🔗 Support Google Assistant or Amazon Alexa (Marusya connects as middleware).
- 🌐 Connect to the Internet via Wi-Fi 5 GHz (recommended) or 2.4 GHz (may work slower).
If your TV is older, try updating the firmware manually. To do this:
- Download the latest version WebOS from the official website LG (Please indicate the exact TV model!).
- Write the file to the flash drive in the following format:
FAT32. - Connect the flash drive to the TV and go to
Settings → Support → Software Update → Update from USB.
How to find out the exact model of your LG TV?
The model is indicated on the sticker on the back of the case (for example, LG OLED55C1) or in the menu: Settings → General → About TV → Product InformationThe first two digits after the letters indicate the year of manufacture (for example, C1 — 2021).
Important! Marusya doesn't work with TVs. LG at the base NetCast (models before 2014) or Android TV (ruler LG Smart TV for some regions). In this case, only management remains through HDMI-CEC, but it is limited to basic commands (on/off, volume).
Step 2: Configure your Wi-Fi router for a stable connection
Problems connecting Marusya to the TV often stem from router settings. Optimal settings:
| Parameter | Recommended value | Why is it important? |
|---|---|---|
| Wi-Fi mode | 802.11ac (5 GHz) or 802.11n (2.4 GHz) |
More stable connection for streaming commands. |
| Channel width | 20/40 MHz (car) |
Reduces interference from other devices. |
| UPnP | Included | Automatically opens ports for communication between devices. |
| DHCP | Enabled (IP range outside the router) | Ensures that the TV and speaker receive unique IP addresses. |
| Security | WPA2-PSK (AES) |
WPA3 may not be supported by older devices. |
How to change settings (using a router as an example) TP-Link):
- Open the router control panel at
192.168.0.1or192.168.1.1. - Go to
Wireless → Wireless Settings. - Set the parameters according to the table above.
- Save the changes and reboot the router.
⚠️ Attention: If your router issues IP addresses in the range10.0.0.xor172.16.x.xSome smart devices (including speakers with Marusya) may not recognize the TV. Try setting a static IP for the TV manually.
Step 3: Connecting Marusya via a smart speaker
If you have Mini Capsule, Irbis A or another column with Marusya, the process is extremely simple:
Plug the speaker into a power outlet and wait for the voice greeting
Connect the speaker to the same Wi-Fi network as the TV
Install the app VKontakte and log in
Link the column to the account in Settings → Devices
-->
Next, follow the instructions:
- Tell the column: "Marusya, find the devices.".
- Wait for the assistant to detect the TV LG in the local network.
- Confirm connection by voice: Connect to TV.
- If a code is requested, enter it using the TV remote (it will appear on the screen).
A critical detail: the speaker and TV must be linked to the same account. VKIf you have multiple profiles, log in to both devices using the same account.
After successful connection, check the functionality using the following commands:
- 🔊 "Marusya, turn on the TV." (if TV supports Wake-on-LAN).
- 📺 "Marusya, open YouTube on the TV.".
- 🔇 "Marusya, turn the volume up to 50%".
⚠️ Attention: If the speaker doesn't find the TV, check if the router is blocking it. multicastThis protocol is used to discover devices on a local network. Find the option in your router settings. IGMP Snooping and turn it off.
Step 4: Connect via the VKontakte mobile app
If you don't have a smart speaker, you can use your smartphone as an intermediary. To do this:
- Install the latest version of the application VKontakte on Android or iOS.
- Log in and go to the section
Marusya → Devices. - Click Add device and select "TV".
- Follow the on-screen instructions - the app will prompt you to connect to your TV's Wi-Fi network (if it supports it) Miracast or Google Cast).
If your TV doesn't appear in the list, try this alternative method:
- 📱 Turn on your smartphone developer mode and activate
USB debugging(For Android). - 🔗 Connect your phone and TV to the same network via Wi-Fi Direct (in the TV menu:
Settings → Network → Wi-Fi Direct). - 🎤 In the app VKontakte Run the device search again.
Once connected, voice commands will be transmitted from your smartphone to your TV via the router. A delay of 1-2 seconds may occur, which is normal for this method.
Step 5: Troubleshooting connection issues
Even with proper setup, errors can still occur. Let's look at the most common ones:
| Problem | Possible cause | Solution |
|---|---|---|
| Marusya can't find the TV. | Different Wi-Fi networks or UPnP disabled | Connect the devices to the same network, enable UPnP on the router |
| Commands are executed with a delay | Weak Wi-Fi signal or congested channel | Switch to 5 GHz or change the channel in your router settings. |
| The TV does not respond to commands | Outdated WebOS firmware | Update your TV software via Settings → General → Software Update |
| A verification code is required but it is not appearing. | Block pop-ups on TV | Allow notifications in Settings → All settings → General → Notifications |
If nothing helps, reset the network settings on your TV:
- Go to
Settings → Network → Reset network settings. - Reconnect to Wi-Fi.
- Repeat the procedure for connecting Marusya.
How do I reset Marusya on a smart speaker?
To reset the speaker to factory settings, hold the power button for 10-15 seconds until you hear a beep. You'll then need to re-link the device to your account. VK and set up a connection to the TV.
Step 6: Optimizing Marusya's performance with an LG TV
To ensure voice control works quickly and smoothly:
- 📶 Place the router closer to the TV and speaker (or use Wi-Fi repeater).
- 🔋 Set up traffic prioritization (QoS) on the router for devices with Marusya.
- 🔄 Update your TV firmware and app regularly VKontakte.
- 🎤 Create voice scripts in Marusya's settings (for example, "Evening Cinema" to launch Netflix and turn off the lights).
For advanced users: If your router supports VLAN, you can separate the TV and speaker into a separate subnet. This will reduce latency and improve security. However, this will require:
- Create a new VLAN in the router control panel.
- Bind the MAC addresses of the TV and speaker to this VLAN.
- Configure a firewall to allow traffic between devices.
FAQ: Frequently asked questions about connecting Marusya to LG TV
Is it possible to connect Marusya to an LG TV without Wi-Fi?
No, you need it for the voice assistant to work. local area network. The alternative is to use Bluetooth, but it is only supported by some speaker models (eg. Mini 2 Capsule) and allows you to control only basic functions (volume, on/off).
Why does Marusya turn on the TV but can't open apps?
This is a limitation WebOSMarusya can only run applications that support it. voice commands through Google Assistant. For example, YouTube And Netflix usually work, but IVI or Kinopoisk — No. Check the documentation for your TV model for a list of supported apps.
How do I disconnect Marusya from my LG TV?
In the appendix VKontakte go to Marusya → Devices, find your TV and press "Delete"If a smart speaker was used, say: "Marusya, turn off the TV."After this, the connection will be broken, but the Wi-Fi settings on the TV will remain the same.
Does Marusya work with LG Android TVs?
Officially, no. Televisions LG on Android TV (for example, some models for the European market) do not support integration with Marusya. In this case, you can use workarounds: connecting via Google Assistant with subsequent transmission of commands or the purchase of an external device (for example, NVIDIA Shield with Marusya).
Is it possible to control an LG TV via Marusya outside the home?
Technically yes, but to do this you need:
- Tune remote access to the router (open ports or use VPN).
- Turn on Wake-on-LAN on the TV (in some models it requires manual activation in the service menu).
- Use a speaker or smartphone connected to the same network via VPN.
This is not safe - it is better to use standard solutions like LG ThinQ for remote control.