Modern video surveillance systems are becoming more and more accessible, and the model Tarot with 100K It occupies its niche thanks to its balance of price and functionality. However, initial setup often presents difficulties for users new to IP cameras. The main challenge is ensuring a stable connection between the device and the router for remote access.
In this guide, we'll cover every step, from preparing your equipment to fine-tuning your network settings. You'll learn how to avoid common mistakes and why your camera might not be able to see your home internet connection. Correct configuration at the start will save you hours of troubleshooting in the future.
Equipment preparation and check of completeness
Before starting software configuration, you must ensure that all components of the camera are in good physical condition. Tarot with 100K The device comes with a basic set of accessories, but it requires a stable power source to operate. Check the integrity of the USB cable and power supply, as insufficient voltage is a common cause of Wi-Fi connection failures.
Make sure your smartphone or tablet that you will use for setup is connected to the same Wi-Fi network that you plan to connect the camera to. Dual-band routers can create confusion: the camera may only support 2.4 GHz, while the phone operates on 5 GHz.
⚠️ Note: If your router is distributing two networks with the same name (Smart Connect), temporarily separate them in the router settings or disable 5 GHz mode during pairing.
It is also recommended to download the required application in advance. For the model Tarot with 100K Typically, the standard software specified in the instructions or universal video surveillance platforms are used. Find the QR code on the device body or in the manual to download the correct software.
Installing and initial setting up the application
The integration process begins with installing the software on your mobile device. Go to the official app store (App Store or Google Play) and enter the name specified in the documentation. Tarot with 100KAfter installation, open the application and create a user account.
Account registration is a mandatory step, as authorization and remote access occur through the cloud server. Create a strong password to protect your account. video stream from unauthorized access by third parties.
After logging in, the interface will prompt you to add a new device. Click the "+" or "Add Camera" button. The app will request permission to use geolocation and Bluetooth—this is necessary for automatic camera detection. Tarot with 100K within range.
- 📱 Make sure Bluetooth is turned on on your phone.
- 📶 The phone must be connected to a Wi-Fi network (not to mobile Internet).
- 🔋 The camera must be plugged into a power outlet and ready to work (the indicator blinks).
The system may prompt you to scan a QR code. Point your phone's camera at the code located on the back of the device or on the packaging. If the scan fails, you can enter the serial number (UID) manually.
The process of pairing the camera with the router
The most crucial step is transferring network settings from the phone to the camera. There are several ways to connect Tarot with 100K, but the most reliable method is to transmit the password via Bluetooth or (beep), if the application supports such functions.
Select your home Wi-Fi network from the list in the app. Enter the router password carefully, paying attention to the capitalization. Any error in the character will prevent the camera from logging into the network.
☑️ Checklist for a successful connection
Once the data is entered, the configuration process will begin. Camera Tarot with 100K The device will attempt to obtain an IP address from the router. During this process, the device may make sounds or rapidly flash its LED. Do not turn off the power during this process.
⚠️ Note: If your router uses MAC address filtering, add the camera's MAC address to the whitelist manually through the router's web interface before starting the setup.
A successful connection will be confirmed by a voice message (if there's a speaker) or by the indicator changing to a solid green or blue. A preview of the video stream will appear in the app.
Configuring network and security settings
After the camera Tarot with 100K If your camera appears in the list of devices, you need to configure security settings. By default, many devices use standard ports and passwords, which is a security vulnerability. Change the camera's administrator password immediately.
In the device settings menu, find the section Network → SecurityHere you can enable video stream encryption. It's also recommended to disable the P2P function if you plan to use the camera only on a local network, although this will limit remote access.
| Parameter | Recommended value | Description |
|---|---|---|
| Protocol | ONVIF / RTSP | For compatibility with other systems |
| HTTP port | 80 (or modified) | Web interface port |
| RTSP port | 554 | Video stream port |
| Encryption | Included | Data protection during transmission |
If you plan to store recordings on a microSD card, format it using the app before installation. The file system must be compatible with the firmware. Tarot with 100K, usually it is FAT32 or exFAT.
Why change the default port?
Changing standard ports (80, 554) to non-standard ones complicates the task of automatic vulnerability scanners that search for devices with factory settings.
Solving common connection problems
Even if you strictly follow the instructions, difficulties may arise. Often the camera Tarot with 100K The connection fails due to incompatible Wi-Fi encryption standards. Make sure your router isn't using the outdated WEP protocol or the newer WPA3, which your device may not support.
Another common issue is a weak signal. If the camera is installed far from the router, the signal strength may be insufficient for stable video transmission. In this case, Wi-Fi repeater or changing the position of the antenna.
Check the date and time settings on your camera. Incorrect time may prevent some security features from working and archive recordings from occurring correctly. Synchronize the time using the app or set up an NTP server.
- 🔄 Reboot your router and camera.
- 📡 Move closer to the router during setup.
- 🔌 Use a different power supply (5V 2A).
If nothing helps, perform a full reset (Hard Reset). To do this, find the button Reset On the case, it's usually recessed. Press it with a paperclip and hold for 10-15 seconds until you hear a distinctive beep.
Optimization and additional features
After successful setup, you can proceed to fine-tuning the functions. Camera Tarot with 100K Often equipped with a motion sensor and night vision. Adjust the motion sensor's sensitivity to avoid false alarms from swaying branches or changing lighting.
Enable push notifications on your phone to respond instantly to events. However, don't set the notification frequency too high, or your phone will vibrate constantly. Use the "smart detection" feature if available in your firmware.
Check the scheduled recording function. If the memory card is full, the camera should automatically overwrite older files. Make sure this feature is enabled in the Storage → Recording Mode.
⚠️ Please note: App and firmware interfaces are subject to update. The layout of menu items may differ from that described in the instructions. Always check the latest software version.
Frequently Asked Questions (FAQ)
Is it possible to connect a Tarot camera with 100K to a 5GHz network?
Most budget IP cameras, including the model Tarot with 100K, only operate in the 2.4 GHz band. If your router broadcasts a single network with a common name for both bands, try temporarily disabling 5 GHz in the router settings or creating a guest network on the 2.4 GHz band only for configuration.
What should I do if the camera says "Device busy"?
This means that the video stream is already in use by another client. Camera Tarot with 100K There's a limit on the number of simultaneous connections. Close the app on other devices or browser tabs. Also, check if recording is running on your PC via ONVIF-compatible software.
How do I reset my camera to factory settings?
Find the hole with the inscription Reset or RSTWith the camera turned on, press it inward with a thin object (like a paperclip) and hold it for about 10 seconds. The camera will make a sound or indicate a reset. After this, you'll need to re-add it to the app as a new device.
Does this model support cloud storage?
Depends on the specific firmware version and sales region. Often, base models Tarot with 100K Only offer local recording to a microSD card. Paid cloud services may be available as an in-app option but require an active subscription.