Setting up wireless printing on a multifunction printer HP Laser 135w may seem like a daunting task, especially if you're new to laser printers from this brand. However, the setup process Wi-Fi connections It's fairly standardized and only takes a few minutes with the right approach. The key is to follow the steps consistently and understand which operating modes the device is currently using.
In this article, we'll cover all the details of connection, from using the WPS button to manually setting the IP address. You'll learn how to avoid common errors that cause your computer to not see your printer on the network, and how to ensure a stable connection for printing documents from any device in your home or office. Connection stability directly depends on the correct entry of network parameters.
Before you begin, make sure your router is working properly and distributing internet. Printer HP 135w supports standards 802.11b/g/n, ensuring compatibility with most modern routers. If you plan to use the device in an office with corporate security, additional security settings may be required.
Equipment preparation and compatibility testing
The first step is to physically prepare the device. Make sure the printer is plugged in and within range of your router's signal. Laser printers are sensitive to interference, so the distance from the access point shouldn't be too great, especially if there are load-bearing walls between them. Wi-Fi signal must be stable for transmitting large amounts of data.
You will also need a computer or smartphone from which to perform the initial setup. For operating systems Windows And macOS The process may differ slightly, but the basic principles remain the same. Know your wireless network password in advance, as you'll need it to enter it into the printer menu.
⚠️ Attention: Printers of the series Laser 135w Only operate in the 2.4 GHz frequency range. If your router broadcasts a 5 GHz network under the same name, make sure you have access to the 2.4 GHz network or have the dual-band feature enabled.
Check if the wireless module is enabled on the device itself. In the control panel HP 135w There's a dedicated button with an antenna icon. Pressing it activates the wireless module, and a flashing indicator indicates that the device is searching for a network or entering setup mode.
WPS method: the fastest way to connect
The easiest way to set up wireless connection One way to connect a printer is to use WPS (Wi-Fi Protected Setup). This method allows you to connect the printer and router without manually entering a password, simply by pressing the appropriate buttons. This is ideal if you don't want to navigate complex menus or if your device's keyboard has limitations.
To begin, press and hold the Wireless button on the printer for a few seconds until the light starts flashing. Then, within two minutes, press the WPS button on your router. The devices will automatically exchange encryption keys and establish a connection.
It is worth noting that the WPS method does not work if your network uses a security protocol WEP Or if the WPS function is disabled by the administrator in the router settings. In modern routers, this function is often enabled by default, but some providers may block it for security reasons.
Configuration via the printer control panel (SSID Menu)**
If automatic connection doesn't work, you can use the device's built-in menu. Press the button Wireless on the control panel to enter the wireless network menu. Use the navigation buttons (up/down arrows) to find the item Network Report or Wireless Menu.
In the list that opens, select Wireless Settings, and then Wireless Setup WizardThe printer will begin scanning for available networks. Find your network name (SSID) in the list and press OK to select it. The device will prompt you for a password.
- 📶 Use the arrows to select password characters.
- 🔑 Please enter your password carefully, observing the letter case.
- ✅ After entering, confirm the action by clicking the OK button.
The process of entering a password on a monochrome display HP 135w This may seem inconvenient, as it requires multiple keystrokes to change characters. However, it ensures that you have manual control over the data you enter. After confirmation, the printer will attempt to obtain an IP address from the router's DHCP server.
Using a USB cable for initial setup
The most reliable method recommended by the manufacturer for initial installation is connecting via a USB cable. This method allows the software HP Smart Or let the driver installer automatically transfer Wi-Fi settings to the printer. You'll need a USB 2.0 Type-B cable, which is usually included.
Connect the cable to your computer and printer, then run the driver installation file downloaded from the official website. During the installation, select "Wireless" or "Wi-Fi" for the connection type. The program will automatically detect the device and offer to share your network settings with it.
1. Connect the USB cable.2. Run the driver installer.
3. Select "Set up a wireless connection".
4. Follow the instructions on the screen.
5. Disconnect the cable when finished.
After successfully transferring the settings, the program will prompt you to disconnect the USB cable. From this point on, the printer operates autonomously via Wi-Fi. This method is especially useful if the network name contains special characters or is hidden (SSID Hidden), which is common on corporate networks.
☑️ Preparing for setup via USB
Setup via the HP Smart mobile app**
Modern smartphones allow you to set up printing without using a computer. To do this, download an app. HP Smart from Google Play or the App Store. Make sure your phone is connected to the same Wi-Fi network you plan to connect the printer to.
In the app, tap the "Add Printer" button or the plus sign. The app will begin searching for devices. If the printer is in setup mode (the indicator light is flashing), HP Smart will detect it and offer to configure it. You'll need to select your network and enter the password.
⚠️ Important: When setting up via the mobile app, make sure your location (GPS) is enabled. On Android and iOS, this is necessary to allow the app to scan for available Wi-Fi networks and transmit their names to the printer.
This method is convenient because after setup, you immediately gain access to mobile printing, scanning to PDF, and toner level checking. The app may also prompt you to update your device's firmware, which is recommended for improved stability.
Driver problems and solutions
A common problem is when the device is found, but printing fails. This is often due to a lack of the correct drivers or a version conflict. Operating system Windows 10/11 often tries to automatically install a generic driver that may not work correctly with specific functions HP 135w.
It is recommended to remove old driver versions through the control panel and download the latest package. HP Laser 135w Full Feature Software From the official support website. During installation, select "Advanced" mode to manage all device settings.
| Problem | Possible cause | Solution |
|---|---|---|
| Offline Printer | Different subnet address | Check the IP addresses of your PC and printer |
| Driver error | Version conflict | Complete software reinstallation from the HP website |
| Doesn't see the network | 5 GHz band | Switch to the 2.4 GHz network |
It's also worth checking the Windows print service. Click Win + R, enter services.msc and find the "Print Spooler" service. It should be running and have the startup type set to "Automatic."
What to do if nothing helps?
Perform a cold reset on the printer. Go to the network menu and select "Restore Network Defaults." After the reset, the printer will return to its factory network settings, and you can begin setup again.
Setting up a static IP address for stable printing
For office use, it's crucial that the printer's IP address doesn't change. If the router reboots, it may assign a new address to the device, causing computers to lose connection. To avoid this, reserve the IP address or assign it statically.
First, find out the printer's current IP address by pressing the information (i) button or printing a network configuration report. Then, log in to the router's web interface (usually at 192.168.0.1 or 192.168.1.1). Find the section DHCP Reservation or Static Lease.
Add a new rule, specifying the printer's MAC address (found on the sticker on the back of the device or in the report) and the desired IP address. Now the router will always assign the same address to the printer. This will eliminate connection interruptions and the need to reconfigure ports on computers.
⚠️ Note: Router interfaces from different manufacturers (TP-Link, ASUS, Keenetic) may differ. The exact menu name may vary, but the principle of reserving a MAC address is the same for all.
Frequently Asked Questions (FAQ)
Can the HP 135w be connected to a 5GHz network?
No, model HP Laser 135w Only supports the 802.11 b/g/n standard, which operates in the 2.4 GHz band. To connect, make sure your router is broadcasting a 2.4 GHz network.
How do I reset network settings on a printer?
Press and hold the Wireless button and the Cancel button (X) simultaneously for 3-5 seconds. The indicators will flash, and the network settings will be reset to factory defaults.
Why won't the printer connect even though the password is correct?
Check if MAC address filtering is enabled on your router. Also, try temporarily disabling complex WPA3 security settings and using WPA2-PSK, as older Wi-Fi modules may not support newer encryption protocols.
Does the HP 135w support printing from a phone without a router?
Yes, this feature is called Wi-Fi Direct. It allows you to connect your phone directly to the printer, creating its own hotspot. However, printing speeds may be slower than through a router.