A modern office or home workspace is unimaginable without the ability to quickly print documents directly from a mobile device. HP Laser MFP 135wr The LaserJet 1000 is a popular laser multifunctional device that supports wireless connectivity, making document management much easier. However, setting up the initial connection between the printer and smartphone often raises questions for users, especially those new to this type of device.
The setup process doesn't require extensive networking knowledge, but it does require careful following of the steps. Initial errors, such as entering the wrong router password or selecting the wrong operating mode, can result in the device not being found on the network. In this article, we'll walk you through all the steps to pair your router. smartphone And MFP, and we will also consider ways to solve typical problems.
It is important to understand that there are several connection scenarios: via a home Wi-Fi network, where both devices are on the same local network, and via a direct connection Wi-Fi Direct, which works even without internet access. The choice of method depends on your current needs and available infrastructure. We'll look at both options so you can choose the one that best suits your situation.
Equipment preparation and compatibility testing
Before you begin software configuration, you must ensure that the equipment is physically ready for operation. Make sure that the MFP HP Laser MFP 135wr The device is plugged into a power outlet and is in a ready state, as indicated by the illuminated power indicator on the control panel. Also, check that paper is loaded in the paper tray and the toner cartridge is properly secured, as some models block network functions if they experience critical hardware errors.
The second important step is preparing your mobile device. For full functionality, you'll need a smartphone or tablet running the operating system Android or iOSMake sure your device has wireless connectivity enabled and, preferably, geolocation (GPS) enabled, as modern versions of Android require this feature to scan for available Wi-Fi networks.
⚠️ Important: If you plan to connect your device via a corporate network, check with your system administrator in advance to ensure that access to new devices is not blocked by MAC address. Such restrictions are extremely rare on home networks.
The third step is to have a stable signal source. If your router only broadcasts on the 5 GHz band, you may encounter difficulties, as many printers, including 135wr, operate mainly in the range 2.4 GHzMake sure your router broadcasts in this frequency range, or temporarily switch your smartphone to the 2.4 GHz frequency during setup.
Reset network settings and enable Wi-Fi mode on the printer
If the printer was previously used on a different network or if setup attempts were unsuccessful, we recommend resetting the network settings. This will avoid conflicts with IP addresses and saved profiles. On the control panel HP Laser MFP 135wr Find the button with the wireless network icon or the button Wireless.
Accessing the network settings menu often requires pressing and holding the wireless button for a few seconds until the lights begin flashing. In some cases, a combination of buttons is required, such as simultaneously pressing the cancel button and the wireless button. The exact sequence for your firmware version can be found in the manual, but a long press of the button is usually the most effective. Wireless until the signal appears.
☑️ Check before setup
After activating setup mode, the Wi-Fi indicator on the device's panel should start blinking. This means the printer has entered connection standby mode and is now visible to external devices. If the indicator remains solid, the device may already be connected to a network and should first be disconnected through the reset menu.
It's important not to interrupt this process or turn off the MFP until the setup is complete. The device's internal memory must have time to store the new parameters. If the flashing stops and the connection is not established, you will need to repeat the setup mode activation procedure.
Connecting via the HP Smart app (Recommended method)
The easiest and most functional way to establish a connection between your phone and printer is to use the official application. HP SmartThis software package is available for free download in stores. Google Play And App StoreThe app automatically detects the device and guides the user through all configuration steps, minimizing the risk of error.
After installing the app, launch it and click the "Add a new printer" button (usually a plus sign or the "Add Printer" button). The app will request permission to use geolocation and the local network—this is necessary to search for devices on the air. Next, follow the on-screen instructions: select your home Wi-Fi network from the list and enter its password.
Sequence of actions in the application:1. Open HP Smart
2. Click "+" (Add printer)
3. Select HP Laser MFP 135w series
4. Enter the password for your Wi-Fi router
5. Wait for the setup to complete
During the setup process, the app will transfer your network information directly to the printer. At this point, the wireless indicator on the printer's body will light up. MFP
⚠️ Attention: Application interface HP Smart May be updated. If you don't see the buttons described, look for similar options in the settings menu or the "Help" section within the app.
Once the process is successfully completed, the Wi-Fi indicator on the printer will stop blinking and turn solid blue or green (depending on the model). This means that IP address The device is successfully received, and is ready for use. Now you can print documents, photos, and scan files directly from the app interface.
Setting up a Wi-Fi Direct connection without a router
Technology Wi-Fi Direct Allows you to create a direct wireless connection between your phone and printer, bypassing the router. This is ideal if your router is temporarily down, you're visiting someone, or you want to ensure the privacy of your data transfers. In this mode, the printer itself becomes an access point.
To activate this mode on HP Laser MFP 135wr, usually just pressing the Wireless button on the control panel. If Wi-Fi Direct isn't enabled by default, you can activate it through the printer's network settings menu using the navigation buttons and the OK button. The device will display the network name (SSID), which often includes the word Direct and the device model.
Next, you need to open the list of available Wi-Fi networks on your phone. Find the network with the name that matches your printer (for example, HP-Print-xx-Laser MFP 135w). When connecting, the system will ask for a password. By default, the password is often indicated on a sticker on the back of the device or on a label inside the paper tray, or it is a standard combination 12345678.
| Parameter | Description | Where to find |
|---|---|---|
| SSID (Network Name) | Printer network name | On the smartphone screen in the Wi-Fi list |
| Password (WPA2) | Connection key | On the sticker on the back of the MFP or in the report printing menu |
| IP address | The device's network address | In the HP Smart app or Configuration Report |
| Mode | Connection type | Wi-Fi Direct indicator on panel |
After entering the password, your phone will establish a connection. Please note that in this mode, your phone may temporarily lose internet access as it switches to the printer's network. Some smartphone models allow you to use both Wi-Fi (for the internet) and Wi-Fi Direct (for the printer) simultaneously, but this depends on the phone's hardware.
What should I do if my phone can't see the printer's network?
Make sure Wi-Fi Direct is enabled on the printer itself (the indicator light should be on or blinking). Try moving closer to the device (no more than 1-2 meters). Restart the Wi-Fi module on your phone. If the issue persists, reset the printer's network settings.
Printing and scanning from mobile devices
Once successfully connected, you gain full access to the device's functions. To print a document, open the desired file (photo, PDF, text) on your phone, tap the "Share" menu or the three dots in the corner of the screen, and select "Print." Select your printer from the list of available printers. HP Laser MFP 135wr.
In the print settings you can select the paper size