Modern technologies allow you to forget about bulky cables connecting office equipment to computers, and make the printing process truly mobile. Model HP Laser MFP 135w It has become one of the most popular solutions for small businesses and home users thanks to its compact size and wireless network support. However, initial setup often presents difficulties for users new to the MFP interface or HP driver features.
In this article, we'll walk you through all the steps for connecting a printer to your local network and smartphone. You'll learn how to activate the mode. Wi-Fi Direct, use WPS technology for fast synchronization and configure the application correctly HP Smart For printing from your phone. Proper setup at the outset will save you from many device access issues later.
Before proceeding with the software, you need to ensure the hardware is ready for use. Unpack the device, remove all shipping tape, and install the cartridge. Without these basic steps, no software will be able to detect your printer on the network. Let's take a closer look at this preparation step, as it forms the foundation for a successful installation.
Initial preparation and testing of equipment
Start by physically connecting and checking the components. Make sure the MFP is plugged in and turned on using the power button. The indicator on the control panel should light up, indicating the device is ready for use. If you see a blinking orange light, this may indicate a cartridge installation error or an open cover.
An important step is to check the status of the wireless module. On the control panel HP Laser MFP 135w There's a button with an antenna icon. Pressing it switches network modes or activates a network search. Make sure the wireless indicator is lit or blinking blue, indicating the module is ready to pair.
⚠️ Important: Before beginning setup, make sure your smartphone or computer is connected to the same Wi-Fi network to which you plan to connect the printer. Using a guest network or a 5 GHz network (if the router uses separate bands) may make it difficult to detect the device.
For stable operation, it is recommended to place the router and printer no more than 10-15 meters apart, avoiding direct obstructions such as metal structures or strong sources of electromagnetic radiation. The signal must be strong to avoid connection interruptions when transferring large volumes of documents.
☑️ Check before connection
Using WPS technology for quick setup
The easiest and fastest way to connect HP Laser MFP 135w to the home network is the use of technology WPS (Wi-Fi Protected Setup). This method allows you to transfer network settings (name and password) from the router to the printer automatically, without having to manually enter complex character combinations through the control panel.
To use this method, your router must support WPS, which is true for the vast majority of modern models. If your router has a button with a corresponding label or icon on it, you can proceed. The synchronization process takes only a few seconds and requires minimal user intervention.
The algorithm of actions is as follows:
- 📶 Press and hold the wireless button on the printer panel for 2-3 seconds until the indicator light starts flashing.
- 🔄 Within 2 minutes, press the WPS button on your router.
- ✅ Wait until the Wi-Fi indicator on the printer stops flashing and turns solid blue.
If the automatic connection fails, the indicator may return to an error state. In this case, it's worth checking whether MAC address filtering is enabled on the router, which could be blocking new devices. Also, make sure you pressed the router button within the allotted two-minute window.
What to do if WPS doesn't work?
If your router doesn't have a WPS button or the feature is disabled in its settings, you'll need to use an alternative connection method via USB cable or the HP Smart app, described below. It's also possible that WPS is blocked by your ISP or network administrator.
Setup via USB and HP software
In cases where wireless setup from the device's control panel is impossible or produces errors, the most reliable method is to use a temporary USB connection. To do this, you'll need a USB Type-B cable (the printer type) and a computer running Windows or macOS. This method allows the driver to "push" the Wi-Fi settings directly to the printer module.
You need to download the full package of drivers and utilities from the manufacturer's official website. Search for your model. HP Laser MFP 135w In the support section, download the software appropriate for your operating system. The full version of the driver includes a setup wizard that will guide you through every step.
During installation, the program will prompt you to select a connection type. Select "Wireless" or "Wi-Fi." When prompted to connect the device, connect the printer to your computer using a cable. The program will automatically detect the MFP and prompt you to select your home network from the list of available networks.
| Setup stage | User action | System response |
|---|---|---|
| Launching the installer | Run the downloaded driver file | Unpacking files and preparation |
| Select type | Selecting "Wireless Connection" | Search for available printers |
| Connecting the cable | Connecting a PC and MFP with a USB cable | Discovering the device and transferring Wi-Fi settings |
| Conclusion | Disconnecting the cable according to the instructions | Switching to network mode |
After the settings have been successfully transferred, the program will ask you to disconnect the USB cable. From this point on HP printer Works independently of the computer and is accessible to all devices on the network. If the installation is successful, the Wi-Fi indicator on the device will be constantly lit.
Connecting your smartphone via the HP Smart app
For mobile device owners, the ecosystem HP offers a powerful application HP Smart, available for iOS and Android. This app not only lets you print documents and photos directly from your phone but also provides advanced management features, such as scanning to PDF, checking toner levels, and adjusting paper settings.
The first step is to install the app from the official store (App Store or Google Play). Once launched, the app will prompt you to create an HP account or sign in to an existing one. While printing is possible without an account, registration grants access to cloud features and remote device management.
To add a printer, click the "+" icon or the "Add Printer" button. The app will begin searching for devices on the current Wi-Fi network. If your HP Laser MFP 135w If your device is already connected to the router (for example, via WPS), it will appear in the list. Tap it, and the app will perform the initial setup.
If the printer isn't yet online, the app may prompt you to enter setup mode. In this case, follow the instructions on your smartphone screen. You may need to temporarily connect to the printer's network (Wi-Fi Direct) to transfer your home internet passwords.
- 📱 Open the HP Smart app and tap Add a printer.
- 🔍 Wait for the model to appear HP Laser 135w in the list of found devices.
- 🔑 Enter your Wi-Fi network password if the app asks for it.
- 🖨️ Wait for the “Printer is ready” message.
Setting up Wi-Fi Direct for printing without a router
One of the most convenient features of the model 135w is support Wi-Fi DirectThis technology allows you to create a direct wireless connection between your smartphone or laptop and your printer, bypassing your home router. This is especially useful if you're visiting someone, in an office with a secure network, or if your home internet connection is temporarily down.
To activate this mode, press and hold the wireless button on the printer's control panel until the lights begin flashing in a specific pattern, or use the setup menu (this often requires pressing the cancel button and the wireless button simultaneously, depending on the firmware version). The printer will create its own network, the name of which usually contains the word "DIRECT" and the device model.
To connect, open your phone's Wi-Fi settings. In the list of available networks, you'll see a name similar to HP-Print-xx-Laser MFP 135wClick it. The system will ask for a password. By default, the password is often located on a sticker on the back of the device or printed on an information page that can be accessed by holding the cancel button.
⚠️ Note: When connecting via Wi-Fi Direct, your phone may lose internet access as it switches to a direct connection with the printer. To return to the network, you will need to manually switch back to your home Wi-Fi after printing is complete.
This mode is ideal for quickly printing photos from your phone or documents from the cloud when internet access is not required. Data transfer speeds in Direct mode are high enough for office tasks, but for scanning large volumes of documents, a stable network via a router is preferable.
Solving common connection problems
Even if you follow all the instructions, difficulties may sometimes arise. One common issue is that the printer "sees" the network but won't connect. This may be due to your router's security settings. Make sure AP Isolation isn't enabled on your router, which prevents devices on the network from seeing each other.
Another important aspect is the frequency range. Model HP Laser MFP 135w supports only the standard 802.11b/g/n, which operates on the 2.4 GHz frequency. If your router only broadcasts the 5 GHz network or has the same name for both bands, the printer may not find the network. Try separating the networks in your router settings or explicitly enabling 2.4 GHz support.
If your device freezes or stops responding, you may need to reset the network settings. To do this on most HP models, simply press and hold the wireless button and the cancel button (the cross) simultaneously for 3-5 seconds. This will reset the network module to factory settings, after which you'll need to repeat the setup process.
Drivers are also worth mentioning. If your computer doesn't see your printer on the network, try adding it manually by IP address. Print a network configuration report (usually by pressing the Cancel button or through the menu), find the IP address (e.g., 192.168.1.55), and when adding the printer in Windows, select "The printer I want isn't listed" -> "Add via TCP/IP."
The secret to a stable connection
If your printer frequently loses connection, try reserving a static IP address for it in your router settings. This will prevent the router from changing the device's address and causing your computer to lose track of it.
Frequently Asked Questions (FAQ)
Can the HP Laser MFP 135w be connected to a 5GHz network?
No, this model is equipped with a module that operates exclusively in the 2.4 GHz band. For a successful connection, ensure your router is broadcasting on this frequency and that your phone or computer is also on the 2.4 GHz network during setup.
What is the default password for Wi-Fi Direct?
The password is usually found on a sticker on the back of the device. If the sticker is illegible, you can find the password by printing a wireless configuration report by holding down the corresponding button on the control panel.
Does printing from iPhone (AirPrint) work?
Yes, HP Laser MFP 135w Supports AirPrint technology. Printing from Apple devices requires the iPhone and printer to be on the same Wi-Fi network. No separate driver installation is required.
What to do if the orange Wi-Fi light is on?
An orange wireless indicator usually indicates a connection error or low signal strength. Try moving the printer closer to the router or repeating the WPS pairing procedure.