Multifunctional device HP Laser 135w It's a compact solution for small offices or home use where wireless connectivity is a priority. Modern users often forego bulky cables, preferring to place their equipment in any convenient location with wireless coverage. However, initial setup Wi-Fi module may cause difficulties for those who are faced with such a procedure for the first time.
The printer-router synchronization process requires a sequential process, as the device does not have a full touchscreen, but relies on a combination of buttons and an indicator panel. Proper setup IP addresses and choosing a security protocol will guarantee reliable document printing from any device on your local network. In this guide, we'll walk you through every connection step, eliminating common mistakes.
Equipment preparation and compatibility testing
Before you begin software configuration, you need to make sure that the hardware is physically ready for operation. Make sure that your router It's turned on, working properly, and emitting the signal you plan to connect the printer to. It's important that the signal frequency matches the printer's requirements, as older models may not support the standard. 5 GHz.
Make sure the cartridge is installed in the device and that any protective tape or shipping materials are completely removed from the paper tray. If the printer is making unusual noise or the error light is flashing, troubleshoot any hardware issues first. Only then can you proceed with network settings.
⚠️ Important: Make sure you know the password for your WiFi network. If the password contains special characters, prepare it in advance, as entering it through the printer's control panel may be difficult or impossible in some modes.
- 📡 Check the router's functionality and the internet connection on other devices.
- 🔌 Make sure the printer is connected to a power source and turned on using the power button.
- 📄 Remove all orange fasteners and protective films from the internal compartments.
- 📶 Find out your network frequency (2.4 GHz or 5 GHz) in your router settings.
Using WPS technology for fast synchronization
The easiest way to establish a connection between the router and HP Laser 135w is the use of technology WPS (Wi-Fi Protected Setup). This method allows you to transfer network information automatically, without having to manually enter a complex password on a device without a display.
First, locate the WPS button on your router; it may be physical or virtual in the web interface. Press and hold it until the wireless light starts blinking. Then, within two minutes, press and hold the wireless button on the printer's control panel. HP 135w until the indicator starts flashing.
The device will automatically find the network and connect, indicated by a solid blue light. If the light continues to flash or turns orange, the connection has not been established, and you should try again closer to the router.
☑️ Checking the WPS connection
What to do if WPS doesn't work?
The WPS function may be disabled in your router's default security settings. Some ISPs also block this feature. In this case, you'll need to use manual configuration via software or the control panel.
Manual setup via the printer control panel
If automatic setup isn't possible, you can use the device's built-in menu. Press the wireless button on the panel. HP Laser 135w until the indicator starts flashing, indicating that you're in setup mode. After that, you need to start searching for networks on the device itself.
In some cases, you may need to reset your network settings to factory defaults. To do this, turn off the printer, then press and hold the wireless button and the cancel button (the cross) simultaneously. Turn on the device without releasing the buttons until all the lights flash. This will restore network module to its original state.
Next, use your computer or smartphone to search for the printer in the list of available networks. You'll see the network name starting with HP-Setup-135w or something similar. Once connected, you can launch your browser and go to the address 192.168.1.1 or use a special installer to select your home network from the list.
| Indicator | State | Meaning |
|---|---|---|
| Blue | It's on constantly | Successful WiFi connection |
| Blue | Flashing | Setup mode or network search |
| Orange | It's on constantly | Connection error or weak signal |
| Orange | Flashing | Configuration error or hardware failure |
Installing HP Smart Drivers and Software
For full functionality in the operating system Windows or macOS A specialized driver must be installed. HP recommends using the app HP Smart, which automatically detects the device on the network and downloads the necessary components.
Download the installer from the manufacturer's official website, avoiding third-party resources where the software may be modified. During installation, the program will ask you to select a connection type; select "Wireless" and follow the on-screen instructions. The program will automatically find the printer. MAC address or online name.
If the automatic search fails, select the "Printer not found" option and follow the instructions to connect via USB cable to transfer the initial network settings. Once the printer receives the WiFi settings, you can remove the cable.
⚠️ Note: The installer interface and menu item names may vary slightly depending on your operating system version and printer firmware update. Always refer to the current prompts on your monitor screen.
Setting up printing from mobile devices (Android and iOS)
Smartphone owners can print documents and photos directly, bypassing the computer. For devices based on Android And iOS the main tool is the application HP Smart, available in the App Store and Google Play. It allows you to not only print but also scan documents and send them via email.
The technology is also available for iPhone and iPad users. AirPrint, which doesn't require installing any additional apps. All you need is your smartphone and printer on the same WiFi network. Open a document or photo, tap "Share," and select "Print." The printer will then appear in the list of devices. HP Laser 135w.
On Android devices, the service can be used Mopria, built into the system. When you try to print, the system will automatically prompt you to select an available printer. Make sure your phone has Wi-Fi enabled, not mobile data, as a direct connection may not work without a dedicated Wi-Fi Direct mode.
- 📱 Install the HP Smart app from the official app store.
- 🔗 Connect your smartphone to the same WiFi network as the printer.
- 🖨️ Add a printer to the app by clicking the plus sign in the main menu.
- 📸 Use the scanning feature to create digital copies of documents.
Diagnosing problems and printing a network report
If the connection is lost or the device status is shown as "Offline," you need to run diagnostics. The first step should always be printing a network configuration report. To do this, go to the dashboard HP Laser 135w Press and hold the wireless button for 5-10 seconds.
The printer will output a page that will show the current IP address, network SSID, and connection status. If the SSID field says "none" or "disconnected," the printer is not visible to the router. Check the correct password and encryption type (WPA2 is recommended).
A common problem is that the router's IP address changes every time it reboots. To avoid this, it is recommended to configure a static IP for the printer through the router's web interface, binding the address to MAC address devices. This will ensure a stable driver connection.
Why can't my HP 135w printer see my WiFi network?
The most likely cause is frequency incompatibility. The printer only supports the 2.4 GHz band. If your router only distributes 5 GHz or combines them under a single name with 5 GHz as the priority, the printer may not connect. Separate the networks in your router settings.
How do I reset network settings on an HP Laser 135w?
Turn off the device. Press and hold the Wireless button and the Cancel button (the cross) simultaneously. Turn on the printer, continuing to hold both buttons until all lights flash. This will reset the network settings to factory defaults.
Is it possible to connect HP 135w to a hidden network?
Yes, but this requires manual SSID configuration. Hidden networks may not be displayed in automatic WPS mode or through the app. You'll need to manually enter the network name (SSID) and password through the configuration utility on your computer.
What does a blinking orange WiFi light mean?
This indicates an authentication error or a lost connection to the router. Check the password, ensure that MAC address filtering is not enabled on the router, and that the signal strength is sufficient at the printer's location.