A modern office or home workspace is unimaginable without convenient wireless printing. Model Epson L805Despite its age, it remains one of the most popular continuous ink supply systems due to its high operating speed and excellent photo quality. However, many users encounter difficulties when trying to set it up. wireless connection Without a computer, relying solely on a smartphone. This is entirely possible, but requires an understanding of the specifics of how drivers and network protocols work.
The main difficulty is that the printer itself doesn't have a built-in screen for entering the router password, and Wi-Fi Direct connection isn't fully supported by all mobile apps. You'll need to complete several steps, starting with preparing the equipment and ending with installing specialized software. Proper setup will allow you to print documents and photos from anywhere in your apartment where your router has a signal. local network.
In this article, we'll walk you through all the configuration steps in detail, paying special attention to nuances often overlooked in official manuals. You'll learn how to properly reset network settings, which router operating mode is required, and why your phone might not recognize the device even after successfully installing the drivers. The key is to pre-configure the Wi-Fi settings via the WPS button or temporarily connect to a PC for the initial configuration if the router does not support WPS. Let's move on to the technical implementation.
Preparatory stage and compatibility check
Before you begin any active work, you need to make sure that your equipment is physically ready. Printer Epson L805 The printer must be turned on, loaded with ink, and loaded with paper. The device is ready if the green power indicator is lit and the error lights are not blinking. Make sure your smartphone is connected to the same Wi-Fi network you plan to connect the printer to. The difference in frequency bands (2.4 GHz vs. 5 GHz) can be critical.
It is important to understand the limitations of the hardware. This printer supports the standard 802.11 b/g/n, which means it works exclusively in the 2.4 GHz band. If your router only broadcasts on the 5 GHz band or uses a security mode unsupported by the printer, the connection will fail. It's also worth checking your mobile device's battery at this point, as installing drivers and searching for a network can take time.
There are two main connection scenarios, depending on your router's capabilities. The first option is to use wireless technology. WPS (Wi-Fi Protected Setup), which allows you to connect devices with the press of a single button. The second option is manual setup via Epson software if the automatic method fails. Determine if your router has a physical WPS button; it's usually marked with an icon.
Setting up Wi-Fi Direct on the printer itself
The Wi-Fi Direct feature allows you to create a direct connection between your phone and printer without using a router. This is ideal if you're visiting someone or if your router is temporarily unavailable. To activate this mode, go to the control panel. Epson L805 You need to press and hold the Wi-Fi button for a few seconds until the lights begin flashing alternately. However, for regular home use, it's better to use infrastructure mode (via a router), as it provides access to the printer's internet services.
If you decide to use a direct connection, you'll need to know the network's SSID and password. This information is printed on the network status report. To obtain it, turn off the printer, then press and hold the network (Wi-Fi) button along with the power button (green with a triangle), then turn on the device. The printer will print a technical data sheet indicating Direct-Name and access password.
⚠️ Note: When using Wi-Fi Direct mode, your phone will lose internet access because it will be connected directly to the printer. To get back online, you'll need to manually switch back to your home Wi-Fi.
To enter Access Point mode, which allows you to manage settings through a browser, use a button combination. Press the Wi-Fi button for 7 seconds until the Wi-Fi and Wi-Fi Direct indicators light up simultaneously. After this, a network with a name like EPSON000000Once connected, you can go to the address 192.168.223.1 in your browser and set the connection parameters to your main router.
What to do if the indicators are flashing red?
A red blinking light usually indicates a connection error or low signal strength. Make sure the printer is no more than 10 meters from the router and there are no thick concrete walls or microwave ovens between them that could cause interference.
Instructions for Android users (Epson iPrint)
Android smartphone owners are in luck, as the Google ecosystem offers more flexible tools for working with peripherals. The official app will be the primary tool. Epson iPrintDownload it from the Google Play Market. After installation, launch the app and grant the necessary permissions to access geolocation and local network. Without these permissions, device locating is impossible on modern versions of Android.
In the app's main menu, select "Select Printer." If the printer is already connected to the same Wi-Fi network as your phone, it should appear in the list automatically. If the printer's status is "Offline," tap it and follow the setup wizard. The app will attempt to transfer your Wi-Fi network settings (SSID and password) directly to the printer. Your phone may temporarily disconnect from the network during this process.
- 📱 Make sure the "Randomize MAC Address" feature is disabled for your home network in your Android Wi-Fi settings, as the printer may block unknown devices.
- 🔌 If the automatic search fails, select the "Wi-Fi Setup" -> "Wireless Setup" option inside the app.
- 🔐 Enter your router password manually, avoiding case errors.
Once the data transfer is successful, the Wi-Fi indicator on the printer should turn green and stop blinking. You can now return to the main menu. Epson iPrint, select a document or photo from your phone's memory, and send it to print. The app allows you to adjust the size, paper type, and print quality, making it a fully functional tool.
☑️ Android Setup Checklist
Setup for iPhone and iPad (AirPrint and Epson iPrint)
Apple users can take advantage of built-in technology AirPrint, which doesn't require installing additional drivers. All you need is an iPhone and a printer. Epson L805 were on the same subnet. Open any document, photo, or web page, click the "Share" button (the square with an arrow), and select "Print." Your device should appear in the "Printers" section.
However, for advanced functionality such as printing from cloud services or scanning (if it were supported by this model directly, but the L805 is only a printer), it is better to use the app Epson iPrint from the App Store. The setup process is similar to the Android version: the app will find the printer on the network and prompt you to set up a connection if one hasn't already been established. iOS has a stricter security policy, requiring exact matching of encryption protocols.
In some cases, your iPhone may not see the printer if AP Isolation is enabled on your router. This feature is designed for guest networks and prevents devices from seeing each other. Go to your router settings and ensure this option is disabled for your primary network. Also, make sure "Hide IP Address" isn't enabled on your device in the specific Wi-Fi network settings, as this can interfere with the Bonjour discovery protocol.
⚠️ Note: If you changed your Wi-Fi password or router, you'll need to reconfigure the printer, as it remembers the old credentials. Reset the printer's network settings by holding the Wi-Fi button for 10 seconds until the lights flash.
Using WPS for fast synchronization
The WPS method is the fastest way to connect Epson L805 If your router supports this feature, you can connect to the network. You don't need to enter the password manually, which eliminates typing errors. On the front panel of the printer, locate the Wi-Fi button. Press and hold it for about 3 seconds until the Wi-Fi and Wi-Fi Direct lights begin flashing (alternating). This means the printer has entered WPS standby mode.
Within two minutes, press the WPS button on your router. Usually, you just need to press it once, but sometimes you need to hold it for a couple of seconds until the wireless network indicator on the router itself flashes. The devices will automatically exchange encryption keys. If the connection is successful, the Wi-Fi indicator on the printer will glow solid green.
| Indicator | State | Meaning |
|---|---|---|
| Wi-Fi (green) | It's on constantly | Connection established |
| Wi-Fi (green) | Flashing | Data is being transferred or searching for a network. |
| Wi-Fi (green) | It doesn't burn. | The network is down or there is an error |
| Wi-Fi Direct | On/Blinking | Direct connection mode is active |
If the indicators are flashing red or rapidly switching, the connection has failed. This may be due to a weak signal or incompatible router security settings. WPS won't work if the router has MAC address filtering enabled or uses an encryption type other than WPA2-PSK (AES). In such cases, you'll have to revert to manual setup via the app.
Solving common connection problems
Even if you strictly follow the instructions, technical issues may arise. One common issue is that the printer is visible on the network, but the status is "Unavailable." This is often due to the router changing the printer's IP address. It is recommended to assign a static IP address to your printer's MAC address in the router settings. Epson L805This ensures that the path to the device does not change after a power reset.
Another common scenario is a protocol version conflict. Printer Epson L805 doesn't support the WPA3 standard, which is being implemented in newer routers. If you have modern equipment, try creating a guest network with the WPA2 protocol and connecting the printer to it. Also, make sure the Wi-Fi channel isn't overloaded by neighbors; switching to channels 1, 6, or 11 in your router settings can significantly improve connection stability.
- 🔄 Reset the printer's network settings: turn off the device, press and hold the Wi-Fi button and the power button, turn it on, and hold for 5 seconds.
- 📡 Check if the "Guest Network" mode is enabled on your router, which isolates devices from each other.
- 📲 Reinstall the Epson iPrint app by clearing its cache in your phone's settings.
If nothing helps, try a temporary connection via a USB cable (if you have an OTG adapter for your phone) or via a computer for the initial Wi-Fi setup using the utility EpsonNet ConfigThis software allows you to see your printer even if it doesn't have an IP address, and manually enter network parameters, bypassing mobile app restrictions.
⚠️ Note: Router interfaces and app versions are subject to update. If you don't find the option described, search for a similar option or consult your router manufacturer's documentation, as the location of security settings may vary.
How do I reset my printer to factory settings?
Turn off the printer. Press and hold the reset button (if applicable) or a combination of buttons (usually paper and power, but for the L805, it's best to use a soft reset by holding the Wi-Fi button for 10 seconds while the printer is off, then turning it on).
Frequently Asked Questions (FAQ)
Can Epson L805 be connected to a 5GHz network?
No, model Epson L805 Only supports the 802.11 b/g/n standard, which corresponds to the 2.4 GHz frequency. To connect, make sure your router broadcasts in this range, or create a separate 2.4 GHz guest network.
Why does my phone say "Printer not responding"?
Most often, this means the phone and printer are on different subnets (for example, one on a guest network, the other on the main network) or client isolation is enabled on the router. Also, check if the printer's print queue status is set to "Offline."
Do I need a computer for the first setup?
Not required, but recommended. Via a computer with a utility. EpsonNet Config Setting up a static IP and complex security settings is easier. However, a basic connection via WPS or the iPrint app is possible without a PC.
How to find out the IP address of a printer?
Print a network status report (Wi-Fi button + Start button when powered on) or view it in the iPrint app under Device Information. You can also find the IP address in your router's client list.
Does Epson Connect cloud printing work?
Yes, the L805 model supports Epson Connect. To do this, you need to register the device on the Epson website, which will provide you with a unique email address for printing. This allows you to print from anywhere with internet access, but it does require initial setup via a PC or a complex app-based process.